REPAIR/MAINT OF STREET LIGHTS AT RAKSHA VIHAR COLONY UNDER GE (I) R and D KANPUR.

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in soft/loose soil and getting out for cable complete all as specified and directed.

Returning filling of excavated soil after laying the cable with spreading leveling watering and well ramming in layers not exceeding 25cm thick in loose/soft soil complete all as specified and directed.

Removal of surplus soil/excavated material obtained from ground level to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above from the starting point complete all as specified and directed.

Supply & spreading local sand obtained from ganga river in trenches for cable cushioning complete all as specified and directed.

Supply & laying /paving of dry well burnt bricks of sub class ‘B’ laid flat of whole brick over the cable after spreading the sand for cable protection complete all as specified and directed.

Cutting & Chasing required on concrete block /path/tile /floor/ wall not exceeding 20 cm girth to concealed the cable/GI wire and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces complete all as specified and directed.

Takingout unserviceable cable any type from trenches,pole, road,duct etc including necessary joints(U/S)fittings and pipes etc complete all as specified and directed

Supply & fix in replacement of GI tubing light grade 40 mm dia with all fitting and fixed complete to wall laid in trenches floor, road crossing and fixing arrangement complete for under ground cable protection including such as MS flats iron clamp nut & bolts washers all as directed and specified.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 10 Sq mm 2 core .complete all as specified and directed

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 16 Sq mm 2 core .complete all as specified and directed.

Supply & fixing bldg/poles light bracket made out 32 mm dia bore G.I pipe, light grade of length not less than 1.5 Mtr, bend to required shape for holding the fitting including Clamps 50x6 mm Flate Iron ,Nut & Bolts for supporting the brackets and taking down the old bracket from existing pole/building.

Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by LED flood light 200/210 watt 240 volt with secondary optics made in pressure die cast housing a LED flood light high efficiency in built integrated electronic LED driver complete with IP 65/66 protection complete all as specified and directed including all accessories complete . Make :Bajaj /Bajaj/Havells/Crompton or as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by LED flood light 150/170 watt 240 volt with secondary optics made in pressure die cast housing a LED flood light high efficiency in built integrated electronic LED driver complete with IP 65/66 protection complete all as specified and directed including all accessories complete . make :Bajaj /Bajaj/Havells/Crompton or as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by Turbo LED flood light 120/100 Watt, 240 volt with secondary optics made in pressure die cast housing and heat sink in aluminium extursion with IP 66 protection high efficiency in built integrated electronic LED driver complete with IP 65/66 protection complete all as specified and directed including all accessories complete . Make :Bajaj/Havells/Crompton or as approved by GE (I).

Supply and fixing in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete Make :Bajaj/Havells/Crompton as approved by GE (I).

Supply and fixing in replacment of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete Make :Bajaj/Havells/Crompton or as approved by GE (I).

Supply and fixing in replacment LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete make :Bajaj/Havells/Crompton or as approved by GE (I).

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed including all accessories complete . Make :Bajaj/Havells/Crompton or as approved by GE (I).

Supply and fixing in replacement of FR PVC insulated, PVC sheathed flat twin core, solid aluminium conductor cable of size 6 sq mm for voltage grade upto 1100 volt confirming to IS- 694/1990 with latest amendments and ISI marked including removing old connection and making service connections to street light feeder. Make Polycab or its equivalent of EON (Indo Aian) / Havells/ Paragon Electron/ Plaza/Rallison/Gloster or as approved by GE(I).

Supplying and fixing in replacment of 1100 volts grade heavy duty cable PVC insulated aluminiumconductor of 10 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular ® to street light feeder complete all as specified and directed. Make:- Polycab or its equivalent of EON (Indo Aian) / Havells/ Paragon Electron/ Plaza/Rallison/Gloster or as approved by GE(I).

Supply and fixing in replacement of automatic control timer for street light of 5 kW of 3 pole/230 V astronomical time switch including timer watch, MCB,inbuilt wiring complete as specified and directed at site. Make: Swadeep/Indoasian or as approved by Eng-in- charge

M&L for pre- fabricated street light junction /distribution box of size 200mm x250 mm with hinged cover system made of MS Sheet/ CRCA sheet duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer suitable for mounting on pole including fixing on pole with clamp 50x6 and nut, bolts and suitable size Aluminium bus bar 04 Nos (3 Phase,1N) connecting incoming and out going connection with proper lugging as latest practice acting as control circuit for street light including MCB SP 'C' 6 Amps for control of s/light complete all as specified and directed.

M&L for preparing scraping the old painted surfaces and applying one coat of aluminium paint on steel tubular swaged poles and swan neck /bracked, chanels/angles including making/pasting three nos cricular strips of 300 mm wide yello & black colour with synthetic reflected enamel paint and marking /stencil writing of pole numbers with black paint complete and all as specified and directed.

Disconnection taking down and opening for replacement of unserviceavle parts with internal wiring and refixing after rectification of defects and functioned properly of street lights /security lights/post top lantern/flood lights any type, size, capacity from poles/sentry posts/top of buildings complete all as specified and directed.

Supply and fixing of Drivers of suitable 70 watt is being utilsed for reapiring as specified and directed at site.

Supply and fixing of Drivers of suitable 100 watt is being utilsed for reapiring as specified and directed at site.

Supply and fixing of Drivers of suitable 120 watt is being utilsed for reapiring as specified and directed at site.

Supply and fixing of Drivers of suitable 150 watt is being utilsed for reapiring as specified and directed at site.

Supply and fixing of Drivers of suitable 200 watt is being utilsed for reapiring as specified and directed at site.

M/S PASHUPATI TRADERS

SAKSHAM SUPPLIERS BUILDERS

M/s A S Electrical

santosh electronics

keerti trading corporation

Kumar Electricals

RAJA RAM AND COMPANY