PROVN OF TRAINING SHED WITH ATT TOILET BLOCKS IN TRAINING AREA, JUNIOUR LEADER WING, THE INFANTRY SCHOOL BELGAUM UNDER GE BELGAUM.

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in hard/ dense soil all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in any type of soil up to top of drain pipe all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in foundation and mass concrete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 using 40mm graded stone aggregate bed to drain pipes including packing under and haunching and benching against the side of pipe after they are laid and tested in 200mm dia pipe all as specified and directed.

M&L for Reinforced cement concrete M-25, using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. all as specified and directed.

M&L for Reinforced cement concrete M-25, using 20mm graded stone aggregate in columns, pillars, piers, posts and struts all as specified and directed.

M&L for Reinforced cement concrete M-25, using 20mm graded stone aggregate in beams, cantilevers, lintels, lintel bands all as specified and directed.

M&L for Reinforced cement concrete M-25, using 20mm graded stone aggregate as in chajjas all as specified and directed.

M&L for Reinforced cement concrete M-25, using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like all as specified and directed.

M&L for Reinforced cement concrete M-25, using 20mm graded stone aggregate in chullah hoods,stair ways(except spiral staircase) including steps( square or spandril), string pieces, carriage, etc complete, any section straight or winding, but excludings landing,RCC water tanks upto 1500 litre or similar items complete all as specified and directed.

M&L for use of form work to staircases (flat) with sloping or stepped soffits including risers and stringers (excluding landing) etc complete all as specified and directed.

M&L for use of form work to sides of concrete foundations, column footings, plinth beams and similar works for rough finished flat concrete surfaces, vertical or to batter, all as specified and directed.

M&L for use of form work to sides and soffits of roof, tie beams, lintels, lintel bands and similar works for rough finished flat concrete surfaces all as specified and directed.

M&L for use of form work to sides of pillars, posts, struts, columns, etc. for fair finished concrete surfaces, square, rectangular or polygonal all as specified and directed.

M&L for use of form work chullah hoods,chajjas, through and similar item including edges etc all as specified and directed.

M&L for use of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200m thick (Horizontal or sloping), flat rough finished surfaces of concrete all as specified and directed.

M&L for use of form work to edges of concrete flats, n.exc 20cm wide horizontal or sloping and similar works exc 10cm but 20cm wide all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

All as described in item No. 49 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Returning filling in with approved excavated soil including spreading levelling, watering and well ramming in layers n. exc. 25 cm thick all as specified and directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil all as specified and directed.

M&L for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

M&L for 25mm thick plain cement concrete 1:2:4, type B-0, using 12.5mm graded stone aggregate as in damp proof course t horizontal or vertical surfaces including use of necessary form work all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 all as specified and directed.

M&L for hard core with broken stone or boulders of gauge n.exc 63mm, deposited, spread ,levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base/ levelling course for flooring all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B1 using 20mm graded aggregate as in sub base for flooring all as specified and directed.

M&L for coloured non skid ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors/Skirting, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed.Note :Make of ceramic tile ; HR Johnson/Kajaria/Naveen

M&L for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed. Note :Make of ceramic tile ; HR Johnson/Kajaria/Naveen

Material and labour for Kota stone slab 20-25mm thick as in lflooring over 15 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete all as specified and as directed.

Material and labour for Kota stone slab 20-25mm thick as in landing,riser and tread in steps skirting, dado over 10 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete all as specified and as directed.

M&L for aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and directed. Note : (i) Each window shall be provided with 2 Nos. of glazed shutters + 1 No. of GI wire mesh shutter of required size. (ii) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iv) Make of sheet glass : Saint gobain/Modi guard/ Gold Fish

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing all as specified and as directed.

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed

S&F stainless steel butt hinges 75mm in size, medium weight all as specified and directed.(ISI MARKED)

S&F aluminium handle, 'D' type, anodised 150 mm in size all as specified and directed.(ISI MARKED)

S&F aluminium anodised barrel tower bolt 150mm size all as specified and directed.(ISI MARKED)

S&F 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and directed. (ISI MARKED)

Material and labour for Floor door stopper of brass body and tongue, anodised, with 150mm long cover plate and hard drawn steel spring, fixed in floor as in repairs complete all as specified and as directed. (ISI MARKED)

M&L for mild steel flats as in wind ties for roof including securing bolts and necessary drilling, conforming to Fe-290 Gde E-165 all as specified and as directed.

Material and labour for Powder coated aluminium frame work as in doors, windows, ventilators and partitions with one or more rebates using standard aluminium extruded sections including provision of joining cleats ,glazing clips, hinges, handles, etc.compete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels wherever required shall be measured and paid separately. (iv) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 Microns

M&L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene rubber gasket in square n exc 0.5 sqm in each pane all as specified and directed.Make :Saint gobain/Modi Guard/Gold fish

M&L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene rubber gasket in square exc 0.5 sqm in each pane all as specified and directed.Make :Saint gobain/Modi Guard/Gold fish

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 all as specified and as directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene rubber gasket in square n. exc. 0.5 sqm in each pane all as specified and directed.Make :Saint gobain/Modi Guard/Gold fish

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene rubber gasket in square exc. 0.5 sqm in each pane all as specified and directed.Make :Saint gobain/Modi Guard/Gold fish

Material and labour for Chequered cement concrete tile of size 30cm x 30cm x 25mm thick, with grey cement and pigments, with glossy finish on top, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping with extra sand etc, complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in coping, bed blocks including use of necessary form work all as specified and directed

S&F 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints/ solvent cement, fixed to walls/ laid in floors/ laid in trenches all as specified and directed. Make :Finolex/Supreme/Prince

S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints/ solvent cement, fixed to walls/ laid in floors/ laid in trenches all as specified and directed. Make :Finolex/Supreme/Prince

S&F 110mm bore UPVC (SWR) bends any radius with access door all as specified and directed.

S&F 75mm bore UPVC (SWR) bends any radius all as specified and directed. Make :Finolex/Supreme/Prince

S&F UPVC PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet all as specified and directed.Make :Finolex/Supreme/Prince

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as directed.

Supply only approved integral water proofing compound all as specified and as directed.Make :Impermo'Roff/Cico

M&L for three coats of white wash on newly plastered surfaces of ceilings including necessary preparation of surfaces all as specified and as directed.

M&L for two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer on newly plastered surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for three coats of white wash on newly plastered walls, pilasters, cornices, etc. including necessary preparation of surfaces all as specified and directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable), any colour, over a coat of primer over 1mm thick layer of wall care putty on newly plastered walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C1, (Using 20 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe all as specified and as directed..Note :MAKE: Marc/Hind ware/Jaguar

S&F PVC grating including jointing with solvent cement 150mm dia outlet all as specified and directed.Note :Make: Paryag/M/S Shakthi Industries

S&F UPVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement all as specified and as directedNote : Make : Finolex/Supreme/Prince

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. .Note : Make : Finolex/Supreme/Prince

S&F PVC connection 15mm size with PTMT nuts, 600mm long all as specified and directed..(ISI MARKED)

S&F vitreous china wash basin, white,flat back size 550x400mm, including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc. including provision of suitable size waste pipe and fittings all as specified and directed..Note :MAKE: Marc/Hind ware/Jaguar

S&F brass chromium plated tubular towel rail 600mm long with and including Chromium plated brass screws & wooden/ plastic cleats all as specified and as directed.(ISI MARKED)

S&F syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed.Note Make : Parryware (Slim Line) /Hindware/CERA

S&F 20 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls , ceilings with PVC batten holders all as specified and as directed.Note Make :Finolex/Supreme/Prince (ISI MARKED)

S&F 25 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls , ceilings with PVCNote Make :Finolex/Supreme/Prince (ISI MARKED) batten holders all as specified and as directed.

S&F 15 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls , ceilings with PVC batten holders all as specified and as directed.Note Make :Finolex/Supreme/Prince (ISI MARKED)

S&F 15mm bore stop valves, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.Note : Make : Seico / GEM /ESS ESS

S&F pillar taps, brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for 15mm bore GI pipe all as specified and directed.Note : Make : Seico / GEM /ESS ESS

S&F 15mm bore bib taps, brass CP, long body, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. Note : Make : Seico / GEM /ESS ESS

Supply and fix Vitreous China Urinal, bowl type, of size 465mmx 355mm x 265mm white with grating and union for discharge pipe complete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed . Note :MAKE: Marc/Hind ware/Jaguar

S&F PVC connection 15mm size with PTMT nuts, 450mm long all as specified and directed..(ISI MARKED)

M&L for machine cut granite stone slab, premium quality, any colour, 18 to 19mm thick, as in risers of steps, skirting, dado, cladding to pillars etc, set and jointed with neat cement slurry laid over and including 10mm thick screed bed in cement mortar 1:4 and pointed in white cement (1:2) mixed with colouring pigments to match with the shade of slab,including rubbing and polishing complete all as specified and directed.

M&L for pre-painted galvalume coated high tensile corrugated/ trapezoidal profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.45mm thick (TCT), as in roofing/ cladding fixed with self drilling fasteners as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

S&F mild steel works in tubular posts, rafters, purlins, etc. including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 all as specified and as directed.

M&L for mild steel flats as in wind ties for roof including securing bolts and necessary drilling, conforming to Fe-290 Gde E-165 all as specified and as directed.

M&L for mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete conforming to Fe 410W (Gde E-250) all as specified and directed.

M&L for mild steel work as in Tie bars with screwed ends,nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165complete conforming to Fe 410W (Gde E-250) all as specified and directed.

S&F rolled mild steel angle sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-410-W Gde-E-250 quality-A all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for 4 mm thick Aluminium composit panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick alluminium alloy PERALUMAN-100 (AIMG1-NS41) complete with all necessary sub-structures, anchors,hindware and fittings to provide a total installation, fixed to existing wooden / steel members with necessory frame work with screwing and scaffolding all as per manufacturers instructions including dismantling of old unserviceable panel of any description and taken as credit complete all as specified and as directed. Note: (i) Measurement shall be taken flat as fixed without any allowance for laps, etc. (ii) Make of Aluminium composit panel : Alstrong/ Aludecor/ Alucobond/ Euroband

M&L for plain cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in roof pedding/benching for maintaining slopes where required over slabs n exc 15cm thick including necessary formwork and finishig the exposed surface even without using extra cement complete all as specified and directed

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm and providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm incl min 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm and on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm , complete all as specified and as directed

Rendering 10 mm thick on concrete surfaces in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

M&L for plain cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in coping, bed blocks including use of necessary form work all as specified and directed

M&L for plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in surface channels benching in drains and similar works all as specified and directed.

M&L for extra for forming fair finished drain or channel of 25cm inner girth in cement concrete using extra cement including forms moulds mitred/ stopped end etc. all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L for providing precast cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate as in cover slabs, spacer bands, curbs, etc. with plain fair faces, set in cement mortar 1:6 all as specified and directed.

Material and labour for 200mm RCC pipes class NP-2 ISI MARKED laid in trenches and jointed in cement mortar 1:3 complete with collar inclding demolition and breaking up PCC and drain pipes inclding demolition and breaking up PCC and SGSW/RCC drain pipes jointed in cement mortar and taking out of trenches and removal of debris off the premises complete all as specified and as directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed.

Supply and fix in repairs Energy saving LED street light fittings, 35 Watts, with in-built electronic driver, IP 66 class of protection with versatile pressure die-cast aluminium body, toughened glass cover with silicon gaskets and energy efficient LED 5700K and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block complete all as specified and as directed. Make: Havells cat part no : ENDURASUNDOWNSL40WLED 765PASYBOPC or equivalent in Philips/CG

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :Indo Asian/L&T/Siemen/Havells

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen/Havells

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make - L&T / Siemen/Indo Asian/Havells

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed. .Note :Make :Indo Asian/L&T/Siemen/Havells

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed ..Note :Make :Indo Asian/L&T/Siemen/Havells

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 16 Sqmm, 4core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

A. N. Kalbhavi

Sadhana Constructions & suppliers

DHANSHRI ENTERPRISES

M/S MAHADEV M PATIL

M/s. KIRAN M CHOUGULE