Loading…
Loading…
Tender Value
₹14.6 L
EMD Value
₹15,000
Closing Date
28 Aug 2026, 3:00 pmDue tomorrow
Executive Engineer, TWAD Board, Namakkal
Executive Engineer, TWAD Board, Maintenance Division, No.134,Southern Building, 1st floor, Tiruchengode Road, Namakkal - 637001.
Desilting of Infiltration Well, Laying of cables with encasing at Headworks under CWSS to 4Tps and 1081 rural habitations in Paramathi, Namakkal, Sendamangalam, Puduchatram, Rasipuram, Namagiripettai, Mallasamudram and Elachipalayam union in Namakkal
2026_TWAD_693363_2
SDRF/09/4TPS/Maint /NKL
Open Tender
Civil Works
Turn-key
Namakkal
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹15,000
24 Aug 2026
24 Aug 2026
31 Aug 2026
25 Aug 2026
28 Aug 2026
25 Aug 2026
25 Aug 2026 - 27 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.000 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete- Offtake well | - | - | - | - |
| 0.999 | For 6 M inner diameter | - | 1 Cum (One Cubic Metre) | 2,504.77 | - |
| 0.000 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete- Raw water Collection well | - | - | - | - |
| 0.999 | For 12 M inner diameter | - | 1 RM (One Running Metre) | 2,504.77 | - |
| 0.000 | Manufacturing, supply and delivery of DI diaphragm type surge control valve against power failure surges or pressure waves caused by velocity changes, quick opening relief easily adjustable pressure setting. The valve should remain closed when line pressure is between the set-points of the two pilots. The valve should open initially when line pressure drops below the setting of the low-pressure pilot to anticipate surges associated with a pump stopping. The valve will also continue to react and remain open when the return high-pressure wave is above the setting of the high-pressure pilot or open when inlet pressure exceeds a pre-determined setpoint at which time the valve opens quickly, With high speed discharge, with flange dimension to EN 1092-2/ ISO 7005[DIN]. Body and cover in ductile cast iron of Grade GGG 40 (or) GGG 50. All internal parts & all cover bolts of austenitic alloy steel and gaskets and seals of EPDM of grade W 270(approved for drinking water) with Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns” and with 5 years warranty- DI Surge Control Valve | - | - | - | - |
| 0.999 | 300 mm | - | 1 No (Each) | 4,95,534 | - |
| 0.000 | Sub Total | - | 1 Job (One Job) | 1 | - |
| 0.999 | GST @ 18% | 1 | 1 Job (One Job) | 1 | ₹1 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
BID4TPSF.pdf
Tender Documents • 1.62 MB
Retendernotice.pdf
Additional Documents • 0.44 MB
BOQ_838651.xls
BOQ • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].