Karnataka

Active

Works

Bridges

Construction of a bridge at chainage 0.54 km on the road from Machahalli Gate (SH-33) to Hadli Circle (NH-209) in Maddur Taluk (SH-190)

Public Works Department

PWD Division Office Mandya | Mandya, Karnataka

Amount: ₹1.6 CrCloses: 9 Jun 20264d left

Tender Value

₹1.6 Cr

EMD Value

₹2.4 L

Closing Date

9 Jun 2026, 10:00 pm4d left

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of a bridge AT chainage 0.54km on machahalli gate to haldli circle

Tender Information

Tender ID

301553

Reference Number

PWD/2026-27/BG/WORK_INDENT36294

Tender Type

Open

Product Category

Bridges

Location

PWD Division Office Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredPWD Contractor Registration Certificate

RequiredTurn over certified by Registered Chartered Accountant with UDIN No

RequiredProfit & Loss Statement certified by Registered Chartered Accountant with UDIN No

RequiredWork done certificate Experience in one similar type of work

RequiredLine of credit / K-Form

RequiredOngoing work details

RequiredDetails of tenders already submitted

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The Tender processing fee shall not be refundable

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Mandya, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract

Contractor should carryout additional test required to test the suitability of materials

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority before use on the work at their own cost

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in charge of this work

All precautions should be taken by the contractor so that there are no damages to such public/ private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client

Contractor should follow strictly the prevailing rules of labour act

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public Works Department, Mandya Division, during office hours on all working days

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost

One Lakh Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 13.1. Bank Guarantee/e-Bank Guarantee as per circular of Finance department GOK letter no:FD 5 EXP 12/2023 Dt:15.05.2023 must be given for the remaining amount in prescribed format. The copy of the Bank Guarantee must be scanned and submitted along with the Technical bid

The successful contractor should setup material testing laboratory at the work site before commencement of work. (For contracts of Rs. 1.00 Crore & above).

The difference in cost deposited by the lowest successful tenderer (for unbalanced) along with the performance security will be released to the contractor 30 days after the completion of defects liability period.

All the uploaded documents in e-portal should be got verified at the Division office within 3 working days from the stipulated date of opening of Technical Bid by producing the original documents at the Division office, failing which the tender is liable for rejection. No separate communication will be made in this regard

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.1) only. Otherwise tender is liable for rejection

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4

Price escalation shall not be considered in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Contractors should be registered as KPWD/CPWD Class III and Above Civil Contractor

Regarding Appealing Aggrieved contractors may appeal to the prescribed (Appellant) authority within 30 days as per KTTP and appeal should be through e-proc only as per Govt.order No:pwd/445/CRN-2024(E) Bangalore DT.14-08-2024. Same will not be considered if appeal through Letters

The returns submitted to the Income Tax Department. Shall be uploaded and shall be produced at the time of verification of Original documents at Division office

The time for completion of whole work is 6 months (including rainy days).

All the originals of uploaded documents in e-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules.

The tenderer should maintain the executed works during the defective liability period for 2 years

GST at 18Percent shall be paid to the tendered amount separately.

Turn over and Profit and loss statement without UDIN Number will be rejected.

B-Value of existing commitment details should be submitted. Else the ongoing works available in the e-portal will be considered as a whole

The contractor shall maintain pothole free road during DLP, if potholes found the contractor should attend the issue within 24 hours as per the instructions of the Executive Engineer

The quantities for the necessary deviation road and cofferdam are provided on a one-time basis in the BOQ and any additional quantities required for completion of the work shall be deemed included in the Contractor s rates no extra payment shall be admissible, and such works shall be executed at the Contractor s own cost and risk

Technical Criteria

General

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 (b) Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar nature of work such as Construction of Bridge of value not less than Rs.80.44 Lakhs.

Work Done Certificate

3.2 (2021-22 to 2025-26) (c) Executed in any one year, the following minimum quantities of work 1. EWE/Embankment/Sub grade earthen-2536.00 Cum. 2. GSB-54.00. 3. W.M.M-98.00 Cum. 4. Asphalt (Including B.M/D.B.M/B.C/S.D.B.C/MSS)-191.00 Cum. 5. RCC / PCC-588.00 Cum. 6. Reinforcement steel-33.00 Tonne

Work Done Certificate

Capabilities of Vendor

3.6 - Tenderers who meet the above minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity is calculated as under Assessed available tender capacity ( AxNx1.50 - B ) where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress N Number of years prescribed for completion of the works for which Tenders are invited. (N-0.50) B Value, at 2026-27 price level, of existing commitments and on-going works to be completed. during the next 6 months

Others -- Work done & balance work to be done certificate issued by an officer not below rank of EE/equivalent.

Financial Status

3.2 a - Achieved in at least two financial years an average financial turnover (in all classes of Civil Engineering construction works only of Rs.321.74 Lakhs. (usually not less than the estimated cost) Turn over and Profit and loss statement With UDI No

Audited CA Certificate of Annual Turnover

3.3 - Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs.80.44 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.)

Line of Credit

Work Locations

Fee & Financial Details

Tender Fee Amount

₹4,030

EMD Fee Amount

₹2.4 L

Important Dates

Last Activity

30 May 2026

Published

30 May 2026

Bid Opening

10 Jun 2026

Download Ends

8 Jun 2026

Pre-Bid Meeting

4 Jun 2026

BOQ Preview

•

Construction of a bridge at chainage 0.54 km on the road from Machahalli Gate (SH-33) to Hadli Circle (NH-209) in Maddur Taluk (SH-190)

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- All the ite...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- All the items in the tender include all lead, lifts, loading unloading, transp...

•

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- All the items in the tender include all lead, lifts, loading unlo...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 ---- All the items in the tender includ...

•

Construction of a bridge at chainage 0.54 km on the road from Machahalli Gate (SH-33) to Hadli Circle (NH-209) in Maddur Taluk (SH-190)

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 mad...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Construction of a bridge at chainage 0.54 km on the road from Machahalli Gate (SH-33) to Hadli Circle (NH-209) in Maddur Taluk (SH-190)

•

RCC Pole - 9 Mtr Long, 145 Kg WL (V-6 ESCOM P.No 3/ 1/1.01) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for ...

•

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth(V-6 ESCOM P.No 44/ 30/2.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour...

•

PSCC Pole - 8 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) as per REC Standards (V-6 ESCOM P.No 3/5/1.05) ---- All the items in the tender include all lead, lifts, loading unloadin...

•

Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth(V-6 ESCOM P.No 44/ 29/2.01) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labou...

•

LT 4 Pin Cross Arm GI (V-6 ESCOM P.No 4 I.No 16/2.06) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete...

•

Labour for 4 Pin Cross Arm (V-6 ESCOM P.No 45 I.No 50/5.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for ...

•

11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concr...

•

Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for c...

•

11 kV, Special 3 Pin Cross Arm - GI (V-6 ESCOM P.No 3/14/2.04) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for...

•

11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for c...

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (V-6 ESCOM P.No 5/52.6.06) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire c...

•

1.1 kV Polymeric Pin Insulator (V-6 ESCOM P.No 5/51/6.05) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for conc...

•

No. 8 Strain Insulator (V-6 ESCOM P.No 5/53/6.07) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete wo...

•

GOS Set 200 Amps Single break (V-6 ESCOM P.No 11/166/24.01) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for co...

•

Labour for GOS Set(V-6 ESCOM P.No 48/97/13.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works,...

•

Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 (V-6 ESCOM P.No 9/144/21.05) For 100/300 kVA 4/5 Star Rated Transformer on PSCC Pole - 9 Mtr Long, 300 Kg WL ...

•

Labour For DP TC Set (V-6 ESCOM P.No 44/39/3.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete work...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hi...

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works...

•

Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hir...

•

Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works...

•

Labour For Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) (V-6 ESCOM P.No44/36/2.08) ---- All the items in the tender include all lead, lifts, loading unloading, trans...

•

8 SWG GI Wire (4.064 mm Dia), Std Wt: 125 Kg/KM (V-6 ESCOM 5/61/8.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery cur...

•

7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (V-6 ESCOM 5/60/8.01) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machine...

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concret...

•

Labour for Guy Set (CDS-1) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit (Escom Pg 46, I.No 67/7.02)(5233*1.9) ---- All the items in the tender include all lead, li...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel (Escom Pg 46, I.No 66/7.01)(3975*1.9) ---- All the items in the tender include all lead, li...

•

Releasing and refixing of DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - GI (V-6 ESCOM P.No 12/179/26.02) ---- All the items in ...

•

Releasing and Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (V-6 ESCOM P.No 44/ 30/2.02)(1113*1.9) ---- All the items in the tender include all lead, lifts, loading unloadi...

•

Releasing and Re- erection of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support (V-6 ESCOM P.No 45/52/5.04) (160*1.9) ---- All the items in t...

•

Releasing and Re- erection of 4 Pin cross arm with Insulator and Braces fixing V-6 ESCOM P.No 45/50/5.02 160*1.9 ---- All the items in the tender include all lead, lifts, loading unloading, transpo...

•

Releasing & Refixing of Over Head Service Mains (Single Phase/3 Phase) Per connection/Installation (While executing reconductoring works only) ---- All the items in the tender include all lead, lifts,...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip( Elec SR Vol-6 P.No.59/12.58.2) ---- All the items in the tender include all lead, lifts, l...

•

Construction of a bridge at chainage 0.54 km on the road from Machahalli Gate (SH-33) to Hadli Circle (NH-209) in Maddur Taluk (SH-190).

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 mad...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 ---- All the items in the tender includ...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hi...

•

Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hir...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw- 4-for-36294-2026-27.docx

Tender Document • 0.97 MB

Ready to Participate?

Download all tender documents and submit your bid

Construction of a bridge at chainage 0.54 km on the road from Machahalli Gate (SH-33) to Hadli Circle (NH-209) in Maddur Taluk (SH-190)

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Work Locations

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?