Widening and strengthening work of

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.As per MoRTH Spec. 301 complete in all respects but excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2.As per MoRTH Spec. 305 complete in all respects but excluding GST.

Mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etccomplete in all respects but excluding GST.(SI No 260)

Construction of granular sub-base by providing grading-1 material in uniform layers with motor grader on prepared surface by mix in place method with rotavator at OMC, & compecting with vibratory roller to achieve the desired density, complete as per Clause 401 complete excluding GST.

Providing laying spereading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.As per MoRTH Spec. 406 complete in all respects but excluding GST.

Providing & applying Primer coat with bitumen emulsion ( SS- 1 Type) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg/Sqm. Using mecha- nical means.As per MoRTH Spec. 502 complete in all respects but excluding GST.

Providing & laying Dense graded Bituminious macadam with 120TPH batch HMP using crushed aggregates of specified grading, premix with bituminous binder @ 4.50 Percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 505(B) Complete in all respects inculding all material (Grade-II) complete excluding GST.

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.20 kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mecha-nical broom as per MORTH Specification clause 503 . complete excluding GST.

Providing and laying bituminous cocnrete with 100-120 TPH batch type HMP producing and average output of 75 Tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver fixisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificiation clause No. 507 (B) complete in all respects but excluding GST

Construction of un-reinforced, without dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. (M-30) As per MoRTH Spec. 602 complete in all respects but excluding GST.

Cement Concrete with 4 cm. guage approved stone ballast, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work complete excluding GST. (SI. No. 281)

M-150 Brick work in in 1:3 (One cement & Three coarse sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work complete in all respects but excluding GST. (SI. No. 307

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 350mm dia Hume Pipe culvert as per MORTH Specification Complete in all respects. complete excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 450mm dia Hume Pipe culvert as per MORTH Specification Complete in all respects. excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 600mm dia Hume Pipe culvert as per MORTH Specification Complete in all respects. excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 900mm dia Hume Pipe culvert as per MORTH Specification Complete in all respects. excluding GST.

Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus complete in all respects but excluding GST. (SI. No. 574)

12 mm thick plaster with cement and fine sand of 1.25 fineness modulus in 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials, labour, tools & plants etc required for proper completion of the work complete in all respects but excluding GST. (SI. No.584)

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra complete in all respects but excluding GST (SI. No. 283)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. And make as approved by Eng-in-charge. As per MoRTH Spec. 1600 complete in all respects but excluding GST.

Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) (new item 15)

M/S SHIV SHAKTI INFRA BUILDWELL PRIVATE LIMITED

M/S BRAHAMSHAKTI ENTERPRISES

GAYATRI CONSTRUCTION