REPAIRS TO CERTAIN DRAINAGE SYSTEM, CHAIN LINK, BARBED WIRE FENCING, FLOORING NEAR WAR MEMORIAL PARADE GROUND, ELBERT EKKA STADIUM AND MISC WORKS IN AREA-I AT GE KAMPTEE.

Amount

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for mild steel TMT bar 8mm dia as in stirrups and distribution bar, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bar 10mm dia and over, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles colour 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 for receiving of wall tiles complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of 20mm thick CM 1:6 complete all as specified and directed.

M&L kota stone slab 15-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick rendering in cement mortar 1:4, on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

S&F 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 20mm thick granite Ruby Red (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and the likes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of granite stone and moulding complete all as specified and directed.

Demolition of unreinforced cement concrete in floors and pavings not exc 15cm thickness below or above ground level, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in PCC path and similar works complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in hard standing and similar works finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

Forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed.

Forming contraction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan to any radius, built in half brick thick wall in CM 1:4 (Using old size brick) complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping complete all as specified and directed.

Taking down cement plaster or wall tiles etc on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade rubber moulded, finished with coloured rubber finish on top finished over sand dust cushion of 40mm thick complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the shade of tiles complete all as specified and directed.

M&L for coloured anti skid outdoor textured tiles, joint free 10 to 12mm thick (squre or rectangular) area of each tile exc 0.09 & not exc 0.16 sqm, on walls/ flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make:- H & R Johnson, Brand - Endura series or equivalent.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

M&L for RCC (Nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) as in foundations, including rafts, slab, footings, foundation ms; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Nominal mix) 1:2:4 type B1(using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to sides and soffits of plinth beam, sides of footings, base of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

S&F rolled mild steel in framed works as in ornamental gate of angle or other section including gusset plate, steel sheeting, pintal hinges and locking arrangement conforming to Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for preparation of new or previous untreated surfaces of steel and iron of any description not exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in PCC drains, haunching, benching, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for extra for forming fair finish drain or channel, 30cm inner grith in cement concrete using extra cement including forms, moulds mitred/ stopped ends etc complete all as specified and directed.

M&L for RCC 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed.

M&L for form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10cm but not exc 20cm wide complete all as specified and directed.

Dismantling post or struts embeded in concrete (wood/ steel/ RCC) of any section embeded in concrete including taking out embeded portion and making good complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good to surface complete all as specified and directed.

S&F in repair galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rail straining bolt including securing or tying at crossing with & provision of galvanised steel wire stapple or steel pins (each line to be measured) complete all as specified and directed.

Dismantling fencing, wire mesh of any description complete all as specified and directed.

Supply only galvanised chain link fencing 3.40mm dia & 100x100 mesh including line wires, weight not exc 4.00 Kg/Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires of any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

S&F mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screrw bolt 10mm dia (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut not exc 5cm long complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.55,550.00]

VIJ ASSOCIATES

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s B S Jain

DE PRETTY AND CO

Harsh Construction Company

Bidder Name

Harsh Construction Company

DE PRETTY AND CO

SHUB CONSTRUTION

M/s B S Jain

M/s DS Khekde

VIJ ASSOCIATES

M/s Jagdish Staioners and General Stores