Various Electrical work for strengthening of electric supply.

Amount

Supply of The Line Material as per Relevent ISS :-

Danger Board With Clamp

Stone pad

Tee Off Channal 125x65x1300 mm

Tee Chanel Clamp

Top Channal

Top Channal Clamp

Nut Bolt With Washer

Holding Clamp

Dropper Channal

Dropper Channal Clamp

11 KV Fuse Set

Dead End clamp

Copper L- Piece 62x225x12 mm

Lt Incoming Pannel with Metering Qubical

Suspension clamp

I Hook

Allumunium Lug 400 sqmm

LT Pin Clamp for PCC

LT Pin Clamp for STP

Meger (Reputed Make)

Earth Tester (Reputed Make)

Multimeter cum Tong Tester (Reputed Make)

Pearcing connector

Tripping Coil for VCB

LT PVC 3.5x400 sqmm

Erection Work :-

Safe Carriage of following material from Electricty store center Etah to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-10 Kms.)

(a) 8.5 Mtr Long PCC Poles.

(b) 11 Mtr Long ST Poles.

(c.) 13 Mtr Long ST Poles.

(d) 11 KV X-Arms, weasal conductor, G.I wire, Dog Conductor, Disc Insulators, Pin insulators, clamps Abc Bunch and other required line material, if any.

(e.) 33 KV XLPE Cable (3*185 sqmm)

(f) 33 KV XLPE Cable (3*300 sqmm)

(g) 11 KV XLPE Cable (3*95 sqmm)

Safe Carriage of following from Electricty Store center Etah to Pit Site of Work through the Kacha and Pakka road loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-10 Kms.)

(a) 63/100 KVA T/F

Erection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

(a) 8.5 Mtr long PCC Pole

(b) 11 Mtr long ST Pole

(c) 13 Mtr long ST Pole

Erection of D/P or section pole including drilling,cutting of material etc. and fixing of all accessories etc. complete.

(a) 8.5 Mtr Long PCC Pole

(b) 11 Mtr Long ST Pole

Shifting of Power transformer having capacity 5 MVA from yard to the safer place with help of crain after disconnecting neutral/body earthing properly as per UPPCL/DVVNL norms.

Ereection and installation of 33/11 KV, Power transformer in a leveled position on the plinth. The work include shifting of transformer to the site of the installation within the sub-station premises, assembling, fixing and fitting of all accessories and filling of transformer oil to the desired level and ensuring that there is no leakage.

Fixing/Erection of LT Incoming Pannel with Metering Equiptment, Grouting as per respoo manual all cost of labor, material and T&P which required for completion of work

Erection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Dismantling and removal of existing ACSR Weasel/Dog/AB Cable from the various area, stacking and placement their coils and their in the safer place including cost of lobour T&P etc. required for proper completion of work.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

(a) ACSR Weasel Conductor

(b) ACSR Dog Conductor

(c.) 33 KV XLPE Cable 3*185 sqmm

(d) AB Cable 50/95/120 sqmm

(e.) LT PVC Cable 3.5x150/3.5x400 sqmm

(f) LT Cable 3x120 sqmm

Installation of 250/400 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

11 KV TPMO with polymer insulator

11 Kv Fuse Set

Danger Board barbed wire including jumper

33 KV Cable Joiting Kit I/D 3x185 sqmm

33 KV Cable Joiting Kit O/D and 3x185 sqmm

11 KV Cable Joiting Kit I/D 3x185 sqmm

11 KV Cable Joiting Kit O/D and 3x185 sqmm

Cable Joiting Kit O/D and 3x300 sqmm

11 KV CT O/G 400/5A

11 KV CT I/C 600/300/5A

3 Phase Distribution Box

Meter Box

PVC Armoud Cable 2x6 sqmm

Single Core PVC Cable 1x1000 sqmm

Single Core PVC Cable 1x630 sqmm

Single Core PVC Cable 1x400 sqmm

Single Core PVC Cable 1x240 sqmm

LT PVC Cable AL 3.5x150 sqmm

LT Protection of DT (MCCB)

Vaccume Intruptor (Off Make)

Tripping Coil for VCB (stelmec)

Pipe earthing of 250/400 KVA medium Power Transformers

Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut

GI Wire 6 SWG

Red Oxide Paint

Alluminum Paint

Any other material/consumable required to complete the work shall be arrange by the contractor at his own cost.

Carriage of following old material from pit site to JE store/store center Etah in distance range 0 to 10 km. including loading & unloading and proper stacking.

1- 100 KVA TF (Old)

2- Scrap (All Line Material)

YASH URJAA VARDHAN PVT. LTD.