Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-Finance C 2 MADEL INDUSTRIAL ESTATE NEAR VIRWANI INDUSTRIAL ESTATE ROAD NO 2 GOREGAON E MUMBAI 400063 | MUMBAI | MUMBAI | MAHARASHTRA | 400063 | ₹33.2 L | L1 | Accepted-Finance L1 Lowest bidder |
| 2 | L2₹42.5 L+₹9.3 L (28.1%)Rejected-Finance | ₹42.5 L+₹9.3 L (28.1%) | L2 | Rejected-Finance L2 Lowest bidder |
| Sl No | Description | Qty | Unit | TECHNOCRATS SECURITY SYSTEMS PVT LTD L1 | Design Studio L2 |
|---|---|---|---|---|---|
| 1.00Civil | |||||
| 2.00 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of nserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Dismantling of existing top flooring | 30 | sq.m. | 200 ₹6,000 Lowest | 450 ₹13,500 |
| 3.00 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal as per directions of Engineer-in-charge.dumping ground for lead upto 10 km for all lifts, complete motor vehicle of 3.5 cum. | 5 | cum | 1,800 ₹9,000 | 900 ₹4,500 Lowest |
| 4.00 | Providing and laying cement concrete 1:1.5:3 (1 cement:3 coarse sand:6 graded stone aggre gates 20 mm nominal size) in plinth, excluding the cost of centring and shuttering.
Make : ACC, Ultratec Birla, JK Cement | 1 | cu.m. | 7,800 ₹7,800 Lowest | 8,900 ₹8,900 |
| 5.00 | Providing and laying cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggre gates 20 mm nominal size) in plinth, excluding the cost of centring and shuttering.
Make : ACC, Ultratec Birla, JK Cement | 1 | cu.m. | 7,350 ₹7,350 Lowest | 8,900 ₹8,900 |
| 6.00 | p/f of concrete floor below RF cabin to give levelv surface with self levelling all inclusive. | 30 | sq mtr | 950 ₹28,500 | 890 ₹26,700 Lowest |
| 7.00Providing, laying using pumps & testing cast - in - place structural controlled cement concrete grade M25 using 20mm down coarse aggregates excluding cost of centering, shuttering and steel reinforcement but including cost of making shear keys and provision of construction / contraction / control joints in various locations, laid, consolidated and cured, item to include all structural items like base raft, ramp, column, wall, footings, equipment foundations, fins, mullions, beams, lintels, pergola, chajja, facia, parapet, railing, slab trenches, drains and sumps etc. of any shape and sizes. The rates of concrete to include the cost of admixtures / plasticisers to achieve specified strength. This item to also include the concrete requiring waterproofing compound like water tanks, basement retaining walls, base raft, leaving sleeves to beams etc. complete. | |||||
| 7.01 | Reinforced cement concrete work in Lintels upto fifth floor level exculidng cost of centring, shuttering, finsihing and reinforcement. | 1 | cu.m. | 7,400 ₹7,400 Lowest | 8,900 ₹8,900 |
| 7.02 | Reinforced cement concrete work for MRI chiller, Magnet base and guard room base on ground floor unit exculidng cost of centring, shuttering, finsihing and reinforcement. | 1 | cu.m. | 7,400 ₹7,400 Lowest | 8,900 ₹8,900 |
| 7.03 | Centring and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases ofcolumns & Beam etc. for mass
concrete. | 15 | sq.m. | 550 ₹8,250 Lowest | 650 ₹9,750 |
Tender Value
₹38.4 L
EMD Value
₹90,572
Closing Date
9 Oct 2025, 6:55 pmClosed
OIC Engineering
Service Block, Engineering Dept HBCHRC, New Chandigarh
Construction of Interior work in MRI room in D wing at HBCH RC Mullanpur New Chandigarh 140901
2025_TMC_878383_1
Interior work in MRI Room
Open Tender
Civil Works
Item Rate
60 days
Homi Bhabha Cancer Hospital Reserch Centre New CHD
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹90,572
Homi Bhabha Cancer Hospital Reserch Centre New CHD
16 Oct 2025
20 Sept 2025
11 Oct 2025
20 Sept 2025
9 Oct 2025
24 Sept 2025
22 Sept 2025
Amount
Civil
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of nserviceable material within 50 metres lead as per direction of Engineer - in- charge. Dismantling of existing top flooring
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal as per directions of Engineer-in-charge.dumping ground for lead upto 10 km for all lifts, complete motor vehicle of 3.5 cum.
Providing and laying cement concrete 1:1.5:3 (1 cement:3 coarse sand:6 graded stone aggre gates 20 mm nominal size) in plinth, excluding the cost of centring and shuttering. Make : ACC, Ultratec Birla, JK Cement
Providing and laying cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggre gates 20 mm nominal size) in plinth, excluding the cost of centring and shuttering. Make : ACC, Ultratec Birla, JK Cement
p/f of concrete floor below RF cabin to give levelv surface with self levelling all inclusive.
Providing, laying using pumps & testing cast - in - place structural controlled cement concrete grade M25 using 20mm down coarse aggregates excluding cost of centering, shuttering and steel reinforcement but including cost of making shear keys and provision of construction / contraction / control joints in various locations, laid, consolidated and cured, item to include all structural items like base raft, ramp, column, wall, footings, equipment foundations, fins, mullions, beams, lintels, pergola, chajja, facia, parapet, railing, slab trenches, drains and sumps etc. of any shape and sizes. The rates of concrete to include the cost of admixtures / plasticisers to achieve specified strength. This item to also include the concrete requiring waterproofing compound like water tanks, basement retaining walls, base raft, leaving sleeves to beams etc. complete.
Reinforced cement concrete work in Lintels upto fifth floor level exculidng cost of centring, shuttering, finsihing and reinforcement.
Reinforced cement concrete work for MRI chiller, Magnet base and guard room base on ground floor unit exculidng cost of centring, shuttering, finsihing and reinforcement.
Centring and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases ofcolumns & Beam etc. for mass concrete.
Providing and Laying and fixing in position Thermo mechanically Treated reinforcement (TMT of all grades) in all reinforced concrete work, including straightening, cutting, removal of loose rust by wire brush and coating with cement slurry, bending, hoisting, laying in position to the shape and profile required at all levels and heights as per drawing and design and/ or as directed, with18 guage MS binding wires etc. complete. (Quoted rate also to include providing & fixing the binding wire, PVC cover blocks, Chairs, Spacer etc.)
METAL DOORS & WINDOWS Providing & fixing aluminum work for doors, windows ventilators and partitions with extruded built up conforming to IS:733 and IS:1285, powder coated fixed with rawl plugs and screws & screws or with fixing clips, or with expansion hold fastners I/c necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required I/c cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass / SS screws, all complete as per drawings and the directions of the Engineer-in-charge ( Glazing and panelling to be paid for seperately )
For openable shutter doors, windows & ventilators I/c frames & providing/fixing hinges/pivots and making provisions for fixing of fittings wherever required I/c the cost of PVC/neoprene gasket required ( Glazing to be paid seperately ) all using 14SWG sections
Providing & fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board grade I, type II conforming to IS:12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufature in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per drawings and directions of the Engineer Prelaminated particle board with decorative lamination on both sides
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as / drawings and the directions of the engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item.)
With panes (wired glass) of 5.50mm thickness ( weight not less than 13.75Kg/sqm)
Filling the gap in b/w aluminium frame & adjacent Brick/RCC work by providing weather silicon sealant over backer rod of approved quality. Upto 5mm depth and 5mm width
Providing and fixing in position aluminium iron- mongery for aluminium doors and windows all less complete properly anodised ( anodic coating not than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
Tower bolts- 200x10 mm
Handles - 200 mm
Twin rubber hanging floor door stopper
Providing and fixing aluminium sliding door bolts ISI marked anodised 300x16mm dia.
Cyclindrical locks in aluminium doors
Providing and fixing matt finished aluminum exposed type hydraulic door closer with necessary accessories and screws etc.
Flooring
Providing & laying 01st quanlity vitrified floor tiles (Marbonite or Granamite) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make,in all colours, and shades, laid on 20mm th. Cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement & matching pigments etc. complete . Size of tile 600x600mm. Make : Somany, Kajaria , H&R Johnson, RAK india
Tempurary covering of flooring with polythane +POP punning
FALSE CEILING Providing and fixing Mineral fiber fine fissured acoustical materials of size595x595mm true horizontal level,dropped ceiling with approved shade including. Sophisticated slotted 9/16" suspension system with a narrow 1/4" reveal. Slotted Tee Suspension System. Double wet hot dipped Galvanizses steel false ceiling. Baked polyster paint or powder coated paint. 9/16" bolt slot with mitered interface. Make : Armstrong or equivalent
Finishing
Chicken wire mesh shall be provided on all juntions of RCC and brick work, when they are in same plane surface as well as on repaired conduit route on wall before plastering.
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
15 mm cement plaster of mix 1:4 (1 cement: 6 fine sand)
POP punning on the new plastered surface providing approx. 6mm th. POP punning for smooth surface.
Finishing walls with Birla wall putty two or more coats with primer coats before painting
Finishing walls with Acrylic Smooth exterior paint of required shade approved brand and manufacture to give an even shade as specified and directed all complete. Two or more coats. Make : Dulux, Asian Paints , Nerolac
MISCELLANEOUS WORKS
Fabricating and fixing in position Aluminium cable trays dim. 450x75mm high fixed with non magnetic nails or screws and hung with aluminum strip 25x3mm inside the RF cabin As per the drawing provided by SHPL.
SITC of 1.6 mm thick GI Perforated type cable Trays of The cable tray shall be fixed to the ceiling/ wall with suitable size of GI clamp, appropriate dia threaded rod & 35mmx2mm thick GI slotted 'C' channel Patti OR suitable size of MS angle support (MS support to be painted with two coats of red oxide & two coats of enamelled paint ).Supports to be provided at an interval of 800mm or lesser depending upon the location. The rate shall include the cost of GripleSupports/ GI rods and MS angle support . Cable Tray=150 mm wide x50 mm height. 2 mm thickness
Providing and fixing in position 4"x2"mm wide GI raceway
Providing & fixing in postion roller fabric venetian bliends to window in approved shades. With hanging accessories all complete
1 Electrical Point 16A and 1 Plumbing Tap and valve with domestic water connection with 25mm copper pipe with nearest exisitng water supply line.
Providing, fabricating and installing in position panels made out of BRC mesh 25x75mm of approx. 1200mm width with MS angle frames including welding of the mesh to the frame and painting in approved shade all complete size(4.0x3.0x4.5 mt. )approx. Mash to be provided on all walls upto of 3 meters
Providing, fabricating and installing in position panels made out of BRC mesh 25x75mm of approx. 1200mm width with MS angle frames including welding of the mesh to the frame and painting in approved shade all complete size(5.0x2.0 )approx. Mash to be provided on all walls upto of 3 meters ( for movement barricading at back )
Providing and fixing Corrugated GI sheet with proper overlap including trusses and purlins as required I/c painting all complete.size(4.6x3.6 mt. )approx.
Aluminium diffuser with powder coated of size 600x600mm diffuserto be connected with air guide of canvass
Potable Cabin for UPS (1800x3000x3000 Approx)
Supply, errection and commissioning of: 60m thick Puf panel having finished with .50mm TCT PPGI Sheet on both inner and outer sides with camlock for walls and ceiling panels. Colour: Off white( Structure only) with 01 single leaf door (900x2100) canopy (sunshade) shall be provided on the outer side of the wall and 02 nos. PPGI framed ventilor with PPGI louver and GI wire for Exhaust (450x40mm)
ELECTRICAL WORKS
Raw PANEL as per SLD in UPS room
UPS outgoing Panel including outgoing for power points
Sub Distribution Boards Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator) 6 way, Double door. Make : Legrand, L&T, Siemens, Havels
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Four Pole 63amp. (10kA, Curve-C)
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6 A to 32 A ratings , SP MCB “C” curve, 10 KA breaking capacity
Providing and installing in position mushroom type emergency stop switches as direted.
Providing and installing in position of ON/Off switches as direted.
Supply, laying and fixing of the following size of PVC insulated and PVC sheathed armoured cable of 1.1kv grade, as per IS 1554 (part 1) & ammended, in trenches,on surface of wall or the ceiling complete with saddles,ties etc. as required including cable marker and end termination with Brass compression gland and copper lugs etc. Make : Legrand, L&T, Siemens, Havels
4 core, 95 sq.mm multistrand Copper conductor
4 core 70 sq. mm. multistrand copper cables
4 core 25 sq. mm. multistrand copper cables
3.5core 240sqmm armmoured Aluminium cables
Providing and fixing of XLPE insulated copper power Supply cable 4 Core x 10sqmm. complete in all respect & as required
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Supply and making end termination with brass compression glands for PVC insulated and PVC sheathed armoured aluminum/copper conductor cable of 1.1kv grade complete with lugs for following size of cables.
4Cx95 sq. mm. conductor
4Cx70 sq. mm. conductor
4Cx25 sq. mm. conductor
3.5Cx240 sq. mm. conductor
POINT WIRING - FRLS wires and FRLS Conduit and wires connected with connector only
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel/medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C (Primary Point upto 12.5 Mtrs.). Make : Wiring:- Polycab/KEI/Finolex/ Havells Switches - Anchor/Legrand/ L&T/ Crabtree/ Roma
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel/PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. Group C (Secondary Point upto 10.5 Mtrs.) Make : Wiring:- Polycab/KEI/Finolex/ Havells Switches - Anchor/Legrand/ L&T/ Crabtree/ Roma
Supplying and fixing suitable size GI/PVC box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
Supplying and fixing suitable size GI/PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 amps modular socket outlets and 2 nos 5/6 amps modular switches, connection etc. as required.
Wiring for radiation lamp and E Stop switch with of 3Cx1.5 Sq mm pvc insulated copper conductor in PVC consuites as reuired
Supply, installation, testing and commissioning of suitable rating Amps (Up to 32 Amps TPN MCB with box) for split ac unit.
LIGHT FIXTURES
Supply and installation of LED Round - Down Lighter Led Panel with 02 AC - DC power supplies .
Supply, installation, testing & commissioning of Emergency light, complet in all respect or as required to engineer- in -charge.
LIGHT FIXTURES
Supplying and fixing of 25mm dia MS conduit alongwith accessories in recess/surface including cutting the wall where required and making good the same.
Supply and drawing CAT 6 wiring in conduit including ferruling and termination
Supply and fixing in position jack plate i/c wall recessed GI box for I/O plates for Telephone and LAN
Supply, installation, testing & commissioning of 1 Giga Bit Network switch of 24 outgoing complete in all aspects including minimum 9 U rack with all accessories and PDU.
Supply, installation, testing & commissioning of Patch cord -1 meters for rack side, complet in all respect or as required to engineer- in -charge.
Supply, installation, testing & commissioning of Patch cord -1.5 meters, complet in all respect or as required to engineer- in -charge.
Supply, installation Testing and commisioning of 24 port Cat-6 patch panel, fully loaded, rack mount complete with I/O socket
FIRE DETECTION & FIGHTING (ADDRESSABLE)
Supply, Installation, Fixing of Stored Pressure (CO2 Dry Chemical Powder) type Fire Extinguisher of Capacity 4 kg Confirms to IS 15683, bearing ISI mark complete with brass forged squeeze grip type valve fitted with pressure gauge , pressurize with dry Nitrogen gas filled, with discharge nozzle with wall mounting bracket, having fire rating.
Supply, Installation, Fixing of Stored Pressure ( Dry Chemical Powder) type Fire Extinguisher of Capacity 4 kg ( MRI compatible )
Supply, Installation, Fixing of Fire Signage - Ceiling mounting type Led Exit Sign Board (Size: 12Inch X 6 Inch)
EARTHING
Maintenance free Chemical Earthing using Electrode of size 76mm, 03 meter long connected with 50x6 mm Copper internal strip complete with excavation, civil work, cast iron cover with back fill earthing compound. The voltage between Neutral and Earth not to exceed 0 volts & IR value less than 1 ohm. The earth reisitance shall be as per IS 3043
Providing and fixing 50 sq mm th. copper cable in recess in 40mm dia GI pipe from ceiling/ earth electrode as required upto the LT panel.
FURNITURE & ACCESSORIES
Supply and Fixing of Revolving chairs height adjustable, low-back with hand-rest. Make : Godrej or equivalent
Supply and Fixing of Wooden storage cupborad with laminate door shutter .(1800 HX 600Dx 900W)
Supply and Fixing of Tables for console with cabinate drawers (3nos.) and keyboard trolly of size (1.2mx0.75mx0.70m)
Supply and Fixing of Dustbins (plastic with lid)
Supply and Fixing of Room Signage (2mm thick white acrylic sheet with PVC colored letters (size 150x350mm approx)
Supply and Fixing of backlit designer signage as per hospital standard 24" dia appx.
Supply and Fixing of Rack for accessories with all hinges, handles, nails etc. Fabricated with 19 mm pre laminate board with shutter (1200x600x1500)
Supply and Fixing of Dressing mirror with Change locker (Fabricated) and hanger (6 lockers in 1) - Godrej or equivalent
Supply and Fixing of reception table as per drawing
Existing HVAC duct dismantling, removing and shifting up to 100 mtr as directed by EIC. This item also include necessary repair of civil work such as cutouts, wall opening, terrace opening etc.
Existing fire fighting pipe line removal, modification, blanking main fire fighting system pipe line and shifting of pipes upto 100 mtr as directed by EIC.
Supply,Fabricarion,installation,testing and commissioning of Aluminium ducting with turning vanes, Aluminium supporting arrangement as per IS 655 and the detailed specifications for MRI. This duct must be connected to the existing duct coming from AHU. Technical details as per tender specifications.
SITC of Supply air diffusers of powder coated aluminium with aluminium volume control Dampers with anti smudge ring & removable core. Standard size 595x595 (375X375 neck size)
SITC of Return air diffusers of powder coated aluminium without aluminium volume control Dampers with anti smudge ring & removable core. Standard size 595x595 (375X375 neck size)
SITC of powder coated extruded aluminium return Air grills with louvers but without volume control Damper complete as required. Size
SITC of powder coated extruded aluminium Supply Air grills with louvers with volume control Damper complete as required. Size
SITC of 2 - 2.5 TR Fix speed Split air-conditioning equipment using CFC / HCFC - free refrigerant,having BEE rating of minimum 3-star with outdoor stand. Cost of refrigerant, Copper fittings , vaccumiazation and Nitrogen testing etc. will be included.
Supply,Installation, Testing and commissioning of Refrigerant pipe with 19 mm thick Class-O closed cell elastometricnitrile rubber tubular sleeves sections should be supplied seperatlyRefrigerant pipe with 19 mm thick Class-O closed cell elastometricnitrile rubber tubular sleeves sections should be supplied seperatly.
SITC of flexible cable 3C/4C*2.5 SQM for Split AC XLPE insulated aluminium/ copper conductor cables. Cables shall be inclusive conductor cables. Cables shall be inclusive of all clamps, saddles, screws, cable identification tags, insulating tapes, affecting terminal connections to the equipment as per the specifications and as required.
SITC of 3 pin top for split Acs (16 A)
Supply, Installation of PVC pipe with insulation dia 25 mm for Split Acs
Supply, Installation, Testing and commissioning of Drain pump for split Acs
Brick work in C.M 1:5 mix including all labour 1charges etc complete Brick work in C.M 1:5 mix including all labour 1charges etc complete
SITC of Copper pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempred and degreased, manufactured as per EN 1057 PART I , Table- x of 1971 and chemical composition as per BS-6017 of 1981. Make- Mexflow/Mandev/Janya
28mm OD * 1mm thk
22mm OD * 1mm thk
15mm OD * 1mm thk
12mm OD * 1mm thk
SITC of Area Alarm with isolation valve Make- Aktive/ MR
4 Gas Services (O2, Vac, N2O, Air 4)
Design Studio (BID ID -3294672)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .