MISCELLANOUS WORKS FOR AUGMENTATION OF 33 /11 KV SHAMSIPORA RECIEVING STATION FROM 6.3MVA TO 6.3 plus 4 MVA TO PROVIDE POWER SUPPLY TO YATRI NIWAS COMPLEX BIJBEHARA

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete along with one coat of red oxide and 2 coats of paint as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Supplying at site Angle iron post & strut whereever required of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Including flat iron strips as per directions of site engineer

Earthing Mat (GI Flat 50mm x6 mm)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil for Power Transformer Foundation(4.15x4.15x1.9)m base and other equipment foundations including chainlink foundation

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns for Power Transformer Foundation(4.15x4.15x1.9)m base and other equipment foundations

Supplying, filling, spreading and leveling stone boulders of size range 5cm to 20 cm, in recharge pit in the required thickness for all leads and lifts all complete as per direction of Engineer-in-charg .for Power Transformer Foundation(4.15x4.15x1.9)m base and other equipment foundation including chainlink foundation

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) for Power Transformer Foundation(4.15x4.15x1.9)m base and other equipment foundations including chainlink foundation

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing Mild steel and medium tensile steel bars 10mm/12mm for Power Transformer Foundation(4.15x4.15x1.9)m base and other equipment foundations including chainlink foundation

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

33 kV Yard Concreting (24mx14mx0.1m)

33 kV Yard metalling (24mx14mx0.1m)

construction of 500mm cable trench

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of classdesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Demolishing cement concrete along with water closet squatting pan manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge

Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors with tiles wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings.along with all accessories including sockets Etc. req. This includes testing of joints complete as per direction of Engineer-in charg, .Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing PPR Unions/reducer /bends/FTE/MTE what ever required for connecting the external water connection with the internal fitting

Providing and fixing CP Brass double lever wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia

Providing and fixing brass bib cock/Angle cock of approved quality. 15 mm nominal bore

Providing and fixing PVC pipes Single socketed pipe 110 mm dia of high quailty (Type B) including preparing of trenches solvent rubber warshers

Providing and fixing PVC bend 87.5° 110 mm bend

Providing and fixing single equal Tee (with door) 110x110x110 mm

Electrical wiring improvement by way of providing and installation of 1.5 mmsq = 90mtr. , , 15 w LED lamps with holders = 10 No. ,yard lights led 50w =2 no., MCB 6A =2 No., all of standard make

Please Enable Macros to View BoQ information