Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 CrAccepted-AOC | ₹16.6 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹17.6 CrRejected-Finance | ₹17.6 Cr | L2 | Rejected-Finance L2 |
| 3 | L3₹18.0 CrRejected-Finance | ₹18.0 Cr | L3 | Rejected-Finance L3 |
| 4 | L4₹18.4 CrRejected-Finance | ₹18.4 Cr | L4 | Rejected-Finance L4 |
| 5 | L5₹18.5 CrRejected-Finance 33 73 LATAKUNJ AJMER ROAD BALUGANJ AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | ₹18.5 Cr | L5 | Rejected-Finance L5 |
Tender Value
₹23.7 Cr
EMD Value
₹35.5 L
Closing Date
25 Oct 2023, 5:30 pmClosed
SE, BSR CIRCLE, PWD, BULANDSHAHAR
SE, BSR CIRCLE, PWD, BULANDSHAHAR
Widening and Strengthening of Jhangirabad-Daulatpur Road (ODR) at Km. 1 to 15(900)
2023_CEMRT_853887_1
7013/96M/E-TENDER/BSR CIRCLE/2023-24 DATE 19.10.23
Open Tender
Civil Works - Roads
365 days
BULANDSHAHAR
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,714
₹35.5 L
SE, BSR CIRCLE, PWD, BULANDSHAHAR
4 Nov 2023
19 Oct 2023
25 Oct 2023
19 Oct 2023
25 Oct 2023
19 Oct 2023
20 Oct 2023
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.).Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (22.4-53mm G-2) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing and laying Rubber Moulded of Interlocking concrete block (compressive strength more than 40MPa) pavement having thickness 80mm as per drawing and Technical specification clause 1504...Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Concrete with 4 cm. gauge Stone ballast, Coarse sand of 2.20 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.(RCC M25).Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.(RCC M20) .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Drainage Spouts complete as per drawing and Technical specification.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
First class Brick Work in 1:3 cement & coarse sand 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Supply ,Laying & Fixing of NP-3 Hume Pipe 350 mm dia S&S in position including labour and T&P etc. required for proper completion of work. .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Supply ,Laying & Fixing of NP-3 Hume Pipe 600 mm dia S&S in position including labour and T&P etc. required for proper completion of work. .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Providing & fixing empty cement bags filled with carted earth upto 1.00 km. lead, hand sewing with suja & sutli and placing in position within 60m. Including cost of E.C.Bags, all labour, material and T&P required for proper completion fo work. As per SOR Chapter 19 New Item 13..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Supply ,Laying & Fixing of NP-3 Hume Pipe 1000 mm dia, .Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. As per SOR Chapter 22 SI No. 22.02..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar) Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes.but Including cost of, all material,bitumen labour, T&P, royality , all taxes and labour cess complete. Excluding G.S.T. As per SOR Chapter 22 SI No. 22.03..Including cost of all material, labour, T&P, and all taxes complete but excluding cost of GST.
M/S SHREE RAM CONSTRUCTION
M/s AP & Associates
Iqbal construction company
M/S VIJAY KUMAR
Jeet Construction
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid