COMPLETION OF INCOMPLETE WORK OF PROVN OF OTM ACCN FOR MED REGT (PH-II) AT BAGRAKOTE UNDER GE SEVOKE ROAD

Amount

BUILDINGS & STRUCTURE (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 10,23,62,744.00 inserted by the MES in Schedule ‘A’ Part-I.

SITE CLEARANCE AND SITE DEVELOPMENT (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “SITE CLEARANCE AND SITE DEVELOPMENT” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 75,29,006.20 inserted by the MES in Schedule ‘A’ Part-II.

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 6,46,773.16 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 33,05,661.92 inserted by the MES in Schedule ‘A’ Part-IV.

RETAINING WALL AND PROTECTIVE WORK (Sch 'A' Part-V)

Lump sum price worked out by the Contractor for “(RETAINING WALL AND PROTECTIVE WORK )” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,59,41,792.74 inserted by the MES in Schedule ‘A’ Part-V.

DEMOLITION (B/R) (Sch 'A' PART-VI)

Lump sum price worked out by the Contractor for “(DEMOLITION (B/R) )” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 15,00,032.21 inserted by the MES in Schedule ‘A’ Part-VI.

ROAD, PATH & CULVERT (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(ROAD, PATH & CULVERT)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 3,44,09,508.97 inserted by the MES in Schedule ‘A’ Part-VII.

SEWAGE DISPOSAL (Sch 'A' Part-VIII)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 16,12,550.81 inserted by the MES in Schedule ‘A’ Part-VIII.

AREA DRAINAGE (Sch 'A' PART-IX)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE )” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 76,16,418.44 inserted by the MES in Schedule ‘A’ Part-IX.

EXTERNAL WATER SUPPLY (Sch 'A' Part-X)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY )” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 5,30,572.05 inserted by the MES in Schedule ‘A’ Part-X.

EXTERNAL ELECTRIC SUPPLY (Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIC SUPPLY )” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 40,44,696.90 inserted by the MES in Schedule ‘A’ Part-XI.

WATER COOLER/ COOLING APPLIANCES) (Sch 'A' Part-XII)

Lump sum price worked out by the Contractor for “( WATER COOLER/ COOLING APPLIANCES) ” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 22,666.44 inserted by the MES in Schedule ‘A’ Part-XII.

HOT WATER SYSTEM (Sch 'A' Part-XIII)

Lump sum price worked out by the Contractor for “(HOT WATER SYSTEM ) ” as listed in Schedule ‘A’ Part-XIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,52,176.20 inserted by the MES in Schedule ‘A’ Part-XIII.

AIR CONDITIONING AND REFRIGERATION (Sch 'A' Part-XIV)

Lump sum price worked out by the Contractor for “(AIR CONDITIONING AND REFRIGERATION )” as listed in Schedule ‘A’ Part-XIV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 69,402.18 inserted by the MES in Schedule ‘A’ Part-XIV.

CONSTRUCTION OF UNROOFED PARK FOR GUNS AND HARDSTANDING FOR LRW (Sch 'A' Part-XV)

Lump sum price worked out by the Contractor for “(CONSTRUCTION OF UNROOFED PARK FOR GUNS AND HARDSTANDING FOR LRW )” as listed in Schedule ‘A’ Part-XV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,07,53,534.54 inserted by the MES in Schedule ‘A’ Part-XV.

DEFECTIVE WORKS AGAINST SCH 'A' PART-I (Sch 'A' Part-XVI)

Lump sum price worked out by the Contractor for “(DEFECTIVE WORKS AGAINST SCH 'A' PART-I )” as listed in Schedule ‘A’ Part-XVI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 88,680.14 inserted by the MES in Schedule ‘A’ Part-XVI.

MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch 'A' Part-XVII)

INTERNAL ELECTRIFICATION S&F of LED light fitting 1 x 18 W (4 FT), surface/ wall mounted with Aluminum housing & integrated high efficiency electronic driver with lower THD (< 15 %) , IP 20, CRI >=80, Colour Temp (CCT) - 6500 K, System lumen not less than 1980 lm. Electronic driver & surge suppressor, power factor 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No. 24 W (4 FT) LED lamp or strip high efficiency LEDs as per OEM with viewing angle of 120º with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block fixing on PVC/wooden round block complete all as specified and directed.

S&F of LED light fitting 1 x 24 W (4 FT), surface/ wall mounted with Aluminum housing & integrated high efficiency electronic driver with lower THD (< 15 %) , IP 20, CRI >=80, Colour Temp (CCT) - 6500 K, System lumen not less than 2520 lm. Electronic driver & surge suppressor, power factor 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No. 24 W (4 FT) LED lamp or strip high efficiency LEDs as per OEM with viewing angle of 120º with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block fixing on PVC/wooden round block complete all as specified and directed.

S&F of surface ceiling mounting luminaire (2' x 2') 36 watt with high performance LEDs, CRCA powder coated, integrated high efficiency electronic driver with lower THD (< 20 %) , IP 20, CRI >=80, Colour Temp (CCT)- 5700 K, System lumen not less than 4150 lm. Electronic driver & surge suppressor, power factor 0.95, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No. 10 W (2 FT) LED lamp or strip high efficiency LEDs as per OEM with viewing angle of 120º with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block complete all as specified and directed.

S&F surface/wall mounted, decorative hexagon bulk head LED light fitting 10 W, pressure die-cast aluminium housing, polyester powder coated metallic finish. Integrated high efficiency electronic driver with lower THD (< 20 %) , IP 20, CRI >=80, Colour Temp (CCT)- 5700 K, System lumen not less than 1000 lm. Electronic driver & surge suppressor, power factor 0.95, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No. 10 W (2 FT) LED lamp or strip high efficiency LEDs as per OEM with viewing angle of 120º with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block complete all as specified.

S&F of LED light fitting 1 x 10 W (2 FT), surface/ wall mounted with Aluminum housing & integrated high efficiency electronic driver with lower THD (< 20 %) , IP 20, CRI >=80, Colour Temp (CCT)- 6500 K, System lumen not less than 1050 lm. Electronic driver & surge suppressor, power factor 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No. 10 W (2 FT) LED lamp or strip high efficiency LEDs as per OEM with viewing angle of 120º with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block fixing on PVC/wooden round block complete all as specified and directed.

S&F of Decorative wall light fixture made up of polycarbonate, suitable for 1x 10 W LED lamp (B-22 Base) including Lamp, complete pre wired & connecting up with suitable wire required all as specified and directed.

S&F of surface ceiling mounting luminaire 10 Watts with high performance LED with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver having THD<10% , Colour Temp (CCT)- 5700 K, Electronic driver & surge suppressor, power factor 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including high efficiency LEDs as per OEM with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block complete all as specified and directed.

S&F of LED Lamp 7 Watts B-22, Colour Temperature 6500 K, inbuilt electronic driver , power factor 0.90, operating range - 140 to 270 V, 50 Hz, 770 lumen complete all as specified and directed.

S&F of building security light 25 watt with high performance LEDs, pressure die-cast aluminium alloy housing, polyester powder coated with high efficiency polycarbonate UV stabilised cover, tempered protective polycarbonate diffuser, integrated high efficiency electronic driver with lower THD (< 10 %) , IP 20, CRI >=80, Colour Temp (CCT)- 5700 K, Lumen efficacy of LED > 145 lm/W. Electronic driver & surge suppressor, power factor 0.95, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including LEDs with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up including GI Pipe Bracket of suitable length bend to required shape with flat Iron clamps/nbolts for fixing including 3 core flexible copper conductor cable of suitable size eiling rose to terminal block complete all as specified and as directed.

S&F of MCB, DB, TPN,415 volts, 4 ways (4+12 WAYS), DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall/other surface complete all as specified and directed.

S&F of MCB, DB, TPN,415 volts, 4 ways (8+12 WAYS), DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and directed.

S&F of distribution board vertical type TPN including one MCCB 4 Pole 125 Amps 16 KA as incomer, double door IP 43 protection, 8 way (8 + 24), with copper Bus Bars, Neutral Links,Earth link,Earthing studs, Blanking Plates, fixed flush to wall/other surface complete all as specified and directed. NOTE : Outgoing MCBs measured and paid seperately under relevant item.

S&F of MCB, TP, 10KA, 415V, "C" curve, 32 A, ISI marked complete all as specified and directed.

S&F of MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and directed.

S&F of MCB, TPN, 10KA, 415V, "C" curve, 32 A, ISI marked complete all as specified and directed.

S&F of MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and directed.

S&F of MCCB 4 pole (Ics=100%ICU) of rating 63 Amps having breaking capacity 16 KA with adjustable thermal magnetic release, overload and short circuit protection complete all as specified and directed.

S&F of MCB Single pole and neutral (SPN) 10 Amps, 10 KA,‘C’ curve, 240 volts complete all as specified and directed.

S&F of MCB Single pole and neutral (SPN) 16 Amps, 10 KA,‘C’ curve, 240 volts complete all as specified and directed.

S&F of MCB Single pole and neutral (SPN) 20 Amps, 10 KA,‘C’ curve, 240 volts complete all as specified and directed.

S&F of MCB Single pole and neutral (SPN) 32 Amps, 10 KA,‘C’ curve, 240 volts complete all as specified and directed.

S&F of MCB Single pole and neutral (SPN) 40 Amps, 10 KA,‘C’ curve, 240 volts complete all as specified and directed.

S&F of MCB Single pole and neutral (SPN) 63 Amps, 10 KA,‘C’ curve, 240 volts complete all as specified and directed.

S&F of MCB Single pole (SP), 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and directed.

S&F of Ceiling Fan Energy Efficient (BLDC) , 5 star rated, AC 230 Volts single phase 1200 mm sweep, 26 watt, with three blade complete with all accessories including MS Hook,down rod, Nuts, Bolts and washer for hanging arrangement without Remote including provision of 3 core of size 0.5 Sqmm (16/0.2 mm) copper cable from ceiling rose to fan complete all as specified and directed.

S&F exhaust fan with louvers 225 mm sweep (Plastic rust proof Body and blade), 1280 RPM, AC single phase 240 volts, 50Hz, Power Input- 45 watts, Air Delivery – 860 CMH and connecting up complete including built in louvers and provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan complete all as specified and directed.

S&F of heavy duty exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 230/240 volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type complete all as specified and directed.

Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and directed.

S&F of Modular type TV Co-Axial Socket - 1 module complete all as specified and directed.

M&L for street light fittings bracket made out from GI pipe 40 mm bore, light grade 1.0 meter long bent to required shape and fixing to Bldg including supply and fixing of Flat iron clamp of size 40mm x 6 mm with Bolts and nuts incl washer of suitable size/length as required duly grouted in wall including painting with two coat of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F of Dummy (Blanking) Plate 18 mm complete all as specified and directed.

S&F of highbay luminaire 80 watt with high performance LEDs, with PDC housing suitable for ceiling (Surface/Suspended) mounting, integrated high efficiency electronic driver with lower THD (< 20 %) , IP 20, CRI >=80, Colour Temp (CCT)- 5700 K. Electronic driver & surge suppressor, power factor 0.95, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including LED lamp or strip high efficiency LEDs as per OEM with viewing angle of 120º with certification LM 79 for liminare, LM 80 for LED source including all necessary internally pre-wired and connecting up with and including twin twisted flexible copper conductor cable of suitable size eiling rose to terminal block complete all as specified and directed.

S&F of energy efficient Wall Air Circulator Fan, 600 mm sweep high air delivery and low noise level, 90° max oscillation, sturdy brazed wire guards with powder coating, conforming to IS: 2997-1964, 180 Watt, 1440 RPM or nearer RPM, Air Delivery not less than 16800 Cm per Hr complete all as specified and directed.

S&F of energy efficient Wall Air Circulator Fan, 450 mm sweep high air delivery and low noise level, 90° max oscillation, sturdy brazed wire guards with powder coating, conforming to IS: 2997-1964, 100 Watt, 1440 RPM or nearer RPM, Air Delivery not less than 9000 Cm per Hr complete all as specified and directed.

S&F of Flame proof Exhaust Fan 300/305 MM Sweep, 1440 RPM, 1120 CFM complete all as specified and directed.

ROAD, PATH & CULVERT applying evenly a priming/tack coat with cationic bitumen (RS-1) @ 3.5 Kg/10 Sqm over unsurfaced water bound surface complete all as specified and directed.

M&L premix bituminous macadam 50mm (consolidated thickness) with 4% binder content using CRMB 55 (Crumb Rubber Modified Bitumen) by weight of total mix, laid, rolled and compacted with 8 to 12 tonne power roller to gradient and camber required to gradient and camber etc. complete all as specified and directed. NOTE : premix bituminous macadam shall be designed as specified and binder content shall be provided as per design mix, contractor shall quote his rates considering the bitumen contents as 4% . Any variation in binder content on minus side shall be adjusted at the rate of Rs.45.00 per kilogram of binder but variation on plus side shall not be paid extra. Contractor shall quote accordingly.

M&L applying evenly a priming/tack coat with cationic bitumen (RS-1) @ 2.5 Kg/10 Sqm etc. over black top surface complete all as specified and directed.

M&L Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content paving bitumen by weight of total mix. The binder shall be CRMB 55 (Crumb Rubber Modified Bitumen), rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete as specified and directed. NOTE : Bituminous premix asphaltic semi dense concrete shall be designed as specified and binder content shall be provided as per design mix, contractor shall quote his rates considering the bitumen contents as 5.5% . Any variation in binder content on minus side shall be adjusted at the rate of Rs.45.00 per kilogram of binder but variation on plus side shall not be paid extra. Contractor shall quote accordingly.

M&L reflective thermoplastic white/yellow road marking paint conforming to BIS 3262 laid down through road marking machine in layer of crystlex and use of 5 kg per sqm by incorparating the white glass beads for reflecting in 100mm width complete all as specified and directed.

Supply and installation of Raised pavement marker (RPM) with polycarbonate lens electronically welded with the RPM body. The marker shall be scartch proof and abrasion resistant mircroprismatic polycarbonate lens with polycarbonate reflective panels with dual prismatic cubes capable of providing total internal reflection complete all as specified and directed. Dimension: The dimensions of the marker is height ; 15.88, width; 101.6, lenght; 89.20mm. The marker conforms to ASTM D4280 & is in accordance with MOSRTH circular referance no. RW/NH 33023/10/97-DO III, dated 11th June 1997. Marker shall be fixed with adhesive and no nails shall be used to affix the marker and shall be marked with manufacturer name.

SEWAGE DISPOSAL S&F of 150mm nominal dia DWCPE pipes (SN-8) laid in trenches and jointed complete all as specified and as directed

S&F of 200mm nominal dia DWCPE pipes (SN-8) laid in trenches and jointed complete all as specified and as directed

S&F of 100mm nominal dia DWCPE pipes (SN-8) laid in trenches and jointed complete all as specified and as directed

EXTERNAL WATER SUPPLY Supply, jointing, testing and laying in trenches/floor/wall etc in standard lengths, Centrifugally Cast (Spun) Ductile Iron (DI) Pressure Pipes with Spigot & Socket end, Class K-7, 150 mm dia (6")conforming to IS: 8329/2000 and amendment No.1, suitable for (push-on) rubber gasket jointing with inside cement mortar lining and outside zinc coating with finishing layer of Black Bitumen/Blue Epoxy coating, ISI marked of the following dia Pipe (nominal diameter), including push on rubber gasket joints complete all as specified and as directed. NOTE :- (i) DI specials/ fittings will be measured and paid separately under relevent items of Schedule (ii) The cost of push on type joint deemed to be included in the rate quoted.

Supply, jointing, testing and laying in trenches/floor/wall etc in standard lengths, Centrifugally Cast (Spun) Ductile Iron (DI) Pressure Pipes with Spigot & Socket end, Class K-9, 100 mm dia (4")conforming to IS: 8329/2000 and amendment No.1, suitable for (push-on) rubber gasket jointing with inside cement mortar lining and outside zinc coating with finishing layer of Black Bitumen/Blue Epoxy coating, ISI marked of the following dia Pipe (nominal diameter), including push on rubber gasket joints complete all as specified and as directed. NOTE :- (i) DI specials/ fittings will be measured and paid separately under relevent items of Schedule (ii) The cost of push on type joint deemed to be included in the rate quoted.

Supply, install, testing & commissioning of Air release valve, Cast iron, double air outlet, flanged ends,conforming to IS- 14845, 80 mm bore connected to the main line including all jointing materials as required complete all as specified and as directed.

M&L for construction of brick masonary valve pit of internal dimensions 900mm x 900 mm x 900 mm complete and fabrication of 3.15 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as shown on drawing No CE/TD-1001/90, Sheet No1/1 all as specified and as directed.

M&L for construction of brick masonary valve pit of internal dimensions 600mm x 600 mm x 600 mm complete and fabrication of 3.15 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as shown on drawing No CE/TD-1001/90, Sheet No1/1 all as specified and as directed.

Drilling and Tapping DI water mains ( in Position) for branch connections of the internal Dia complete all as specified and directed.

M&L for fittings ISI marked of size 100 - 150 mm bore suitable for DI pipes class K-12, PN 10, as per IS: 9523 / 2000 with inside cement mortar lining andoutside Zinc coating with finishing layer of Black Bitumen, such as bends (any type radius & angle) tapers, tee pieces, single branches, Y junctions, double junctions, connecting pieces, Nuts & bolts, gaskets, flanges, including push on rubber joints etc. complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY Supply and fixing LED street light luminaire 45 Watt Energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP-65 protection and Impact resistance of IK07 with 10 KV Built-in Surge Protection device with high performance LEDs,System Lumen 4600 Lumen,power factor > 0.95, polyester powder coated with high efficiency polycarbonate UV stabilised cover, tempered protective polycarbonate diffuser, integrated high efficiency electronic driver with lower THD % ≥10, Colour Temp (CCT)- 5700 K operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including LEDs with certification LM 79 for luiminare, LM 80 for LED source including all necessary internally pre-wired and connecting up complete all as specified and as directed.

Supply, installation, testing and commissioning out door type LT Control Panel of suitable size, CPRI type tested, factory fabricated totally enclosed, with suitable neoprene rubber gasket to make it completely dust and vermin proof, degree of protection not less than IP 55, conforming to IS : 60947 : 2004 double leaf shutter in front and single leaf shutter in rear side. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation and copper busbar wrapped with PVC tape/sleeves and maintained the colour code and copper strip busbar as per MCCB/ACB amps rated to MCCB input and MCCB output of suitable length for connection of cable from main busbar. Panel shall be fabricated with 3.15 mm thick CRCA sheet and pass through 11 tank process (certificate will be provided by the manufacturer) duly pre-treated & powder coated, framing with MS angle iron 40 x 40 x 6 mm and MC 100 channel base duly pre-treated and powder coated paint over exposed external & internal surfaces having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected, and suitable for 415 volts, 50 Hz, 3 phase 4 wire system including complete internal wiring with 2.5 sqmm copper wire and connections. The bottom of the outer shell shall be contained with detachable plate having provision for entry of armored cable of adequate size with glands. Inner shell shall be compartmentalized for each control gear. Provision of two Nos threaded earthing stud at bottom and lifting lugs of suitable size at top to lift the panel safely shall be made and comprising with and including following accessories and mounted on PCC (1:3:6) type C-2 foundation of suitable size and depth (min 30 cm below ground level & min 30 cm above ground level) including necessary excavation and earth work complete all as specified and as directed with and including the following accessories.:- (FPB 2 near MT Garage) Item Continued as 16.54

Supply and Fixing new generation energy saving & environmental friendly, long life, pressure die - cast aluminium housing Flood Light 50 watt with highly efficient LEDs as light source with PC diffused lens enclosure over LED for glare free light. with IP66 protection and impact resistance of IK07, CCT 5700K, THD % ≥10, Power Factor ≥ 0.95, System Lumen 5000 lm (Min), Operating temperature: -10 °C to + 50 °C, Operating voltage range: 140 V - 270 V, with certification LM 79 for luiminare, LM 80 for LED source all as specified and as directed.

Supply, installation, testing and commissioning of LED based Solar street light system stand alone type, on pole (MNRE specification) incl LED street light system of 1 x 24 watt/ nearest higher available rating, system lumen not less than 3150 lm, capable of working on DC 12 volts power from battery unit, being charged by the solar photovoltaic array panel through charge controller, luminaire fixing arm made out of ISI marked GI pipe medium grade of dia 50 mm of length not less than 0.5 mtr with suitable fixing arrangements as per manufacturer etc. The details of different items are as under :- (a) Luminaire :- IP 65, full body, aluminium pressure die cast housing, LED type 1 x 24 W/ nearest higher available rating all as specified and directed suitable for battery system of 12 Volts DC. (b) Lead acid low maintenance tubular Solar battery 1 No of minimum 12V, 100 AH @ C10 rating (12 Volt system)of low maintenance type all as specified and directed. (c) Poly crystalline solar photovoltaic array panel conforming to all relevant IEC/IS standards of best quality. Solar Panel shall be min 125 Wp(12 Volt system). The panel shall be suitably connected to battery through charge controller for its charging all as specified and directed. (d) Solar Charge controller MPPT based conforming to relevant IEC/IS standards shall be provided to charge the battery from solar photo voltaic array panel all as specified and directed including suitable protection mechanism. Item Continued as 16.58

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm including - 04 Nos cable terminal, 02 Nos polycarbonate cable gland , 01 Nos DIN rail and 01 No, MCB SP, 10 KA 6 Amps

M & L for three single core FR PVC insulated sheathed stranded copper conductor cable drawn into steel pole of size 2.5 sq mm for connection or security/street light fitting from junction box all as directed and specified

M&L for street light bracket made out of ISI marked GI pipe medium grade 40mm dia 1.5 mtr long bend to required shape and fixed with necessary nuts, bolts, flat iron clamps of size 25 x 6 mm (02 Nos) and washers for fixing LED light fitting on street light poles duly painted with one coat of red oxide and two coats of aluminium paint complete all as specified and directed.

M&L for cable route marker made up of PCC block (1:3:6) type. C-1 using 20mm graded stone aggregated of size 900 mm x 300mm x 100 mm thick (45 Cm burried in ground) and properly painted as per approved colour Brown/Blue (HT/LT) and written both side with signed red colour paint ( HT cable 11 KV or LT cable 1100 Volts) on route marker including necessary excavation and earthwork complete all as specified and as directed. NOTE :- (i) The spacing between two consecutive cable route indicators shall not be more than 50 meters & also shall be provided at each & every bend or corner. (ii) PCC will be measured and paid separately

M&L for boring under road for passing the cable/GI pipe under existing road up to 1 mtr depth as directed by Engr-in-Charge.

Supply, installation, testing and commissioning out door type LT Control Panel of suitable size, CPRI type tested, factory fabricated totally enclosed, with suitable neoprene rubber gasket to make it completely dust and vermin proof, degree of protection not less than IP 55, conforming to IS : 60947 : 2004 double leaf shutter in front and single leaf shutter in rear side. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation and copper busbar wrapped with PVC tape/sleeves and maintained the colour code and copper strip busbar as per MCCB/ACB amps rated to MCCB input and MCCB output of suitable length for connection of cable from main busbar. Panel shall be fabricated with 3.15 mm thick CRCA sheet and pass through 11 tank process (certificate will be provided by the manufacturer) duly pre-treated & powder coated, framing with MS angle iron 40 x 40 x 6 mm and MC 100 channel base duly pre-treated and powder coated paint over exposed external & internal surfaces having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected, and suitable for 415 volts, 50 Hz, 3 phase 4 wire system including complete internal wiring with 2.5 sqmm copper wire and connections. The bottom of the outer shell shall be contained with detachable plate having provision for entry of armored cable of adequate size with glands. Inner shell shall be compartmentalized for each control gear. Provision of two Nos threaded earthing stud at bottom and lifting lugs of suitable size at top to lift the panel safely shall be made and comprising with and including following accessories and mounted on PCC (1:3:6) type C-2 foundation of suitable size and depth (min 30 cm below ground level & min 30 cm above ground level) including necessary excavation and earth work complete all as specified and as directed with and including the following accessories.:- (FPB 3 near JCO Living) Item Continued as 16.65

STAND BY GENERATING SET Supply , Installation , Testing and commissioning Direct injection, Radiator cooled engine, 3 cylinder, in line, 4 stroke, rated at 1500 RPM, Prime mover suitable capacity for driving 20 KVA alternator with electric control governor system, confirming to BS-5514 and shall be as per revised MOEF norms / CPCB-IV plus has the following specifications :- (i) BLANK (ii) Stainless steel exhaust flexible coupling and exhaust pipe to insulated with glass fire wool to be claded with plain GI sheet & extended out side the building (iii) Silencer extended out side to the building complete. (iv) Radiator (v) Coolant inhabitor (vi) Plate type lubricant oil cooler (vii) Spin-on-filters-coolant, fuel & lubricant oil. (viii) Dry type, heavy duty, replaceable paper element air cleaner with restriction indicator. (ix) Flywheel housing and flywheel and flywheel to suit single bearing alternator (x) Electrical starter motor (xi) Battery charging alternator (xii) 12 Volts, 80 Ah battery with multistranded copper cable for connecting wire and terminals complete (xiii) First fill lub oil. Item continued as 16.68

B. ALTERNATOR (i) Self excited, self regulated (ii) Voltage regulation plus/minus 1 percent (iii) Class 'H' insulation (iv) Silent pole revolving field (v) Digital automatic voltage regulator (Part of PCC 1301) (vi) Telephone interference factor - 50 (vii) Total harmonic factor Better than 2% (viii) Supplying power to variable electrical load for unlimited hours. Prime power (PRP) is in accordance with ISO 8528. Ten percent over load capacity for one hour every 12 hrs of operation and will be suitable tropical conditions C. FUEL TANK (a) Fuel tank suitable capacity for minimum 12 hrs run with provision for supply and return lines, level indicator, drain valve, cleaning cover, vent pipe & locking devices shall be provided (b) Fuel pipe line from fuel tank to FIP of suitable size (c ) The fuel tank has to be mounted/located in side the cubicle. D. ACOUSTIC ENCLOSURE (i) Designed to meet stringent MoEF/CPCB norms 75dBA @ 1 meter. (ii) Air inlet louvers to be designed to operate at rated load even at 50 degree centrigrade air inlet temp. Item continued as 16.69

iii) Cubical to be powder coated for long lasting service life and super finish with UV resistent poder coating, it has to with stand extreme environment. Has to be use stain steel hardware. iv) Insulation material has to meets exacting IS 8183 speces for better sound (v) Provision of Genset controller for Engine & alternator E. ACCESSORIES (i) Periodical maintenance tools as per manufacture (ii) Minimum two years spares as manufactures design. (iii) Operational, spare parts & installation guide line catalogue F. AMF CONTROL PANEL FOR DG SET (i) MCCB 63 Amps, 4 pole, 415 volts, 25 KA, 50 Hz with thermal magnetic and microprocessor release, Make- Legrand or equvalent make of ABB/ Seimens - 01 No (ii) Power contactors of suitable sizes, Air breake type - 02 Nos (iii) Digital type multi functional meter -01 Nos (iv) Current transformer (CT) of rating 100/5, tape wound, rated burden 5 VA - 03 Nos (v) Micro processor based relay of suitable size/ratings-01 Nos (vi) Battery charger auto/manual switch - 01 Nos (vii) Suitable annunciation with features of following protections: - Over current, overvoltage, under voltage, under frequency, Low pressure oil. Item continued as 16.70

WATER COOLER/ COOLING APPLIANCES Supply, installation, testing & commissioning water cooler storage type, ISI maeked, Electric driven,single phase, 230volts, 50 Hz with all internal accessories, stainless steel body & tank, power saving PUF installation, adjustable cold water thermostate 10 degree to 25 degree centigrade, auto cut off favility, over load protection, stainless steel front panel, extended plastics legs, eco friendly conforming to relevant IS & pf shall not be less than 0.85, compressor & approx storage capacity of 40 ltrs and nominal cooling capacity of 40 ltrs per hour above 3 star rating incl electric connection complete all as specified and directed.

S&F voltage stabilizer of automatic operation, single phase naturally air cooled indoor type & designed for input variation between 100 volts to 290 volts with output volatge stabilized at 230 volts with accuracy of plus/minus 2.5% and of capacity 2 KVA complete all as specified and directed

HOT WATER SYSTEM Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord including connecting pipe Hot & Cold complete all as specified and as directed.

AIR CONDITIONING AND REFRIGERATION Supply, installation, commissioning and testing of refrigerator double door, toughened glass shelves, BEE 3 star rating frost free defrosting refrigerator, eletcric driven, single phase, 230 volts, 50 Hz of capacity 310 ltrs or nearest higher standard size complete all as specified and directed.

Supply, installation, commissioning and testing of refrigerator double door, toughened glass shelves, BEE 3 star rating frost free defrosting refrigerator, eletcric driven, single phase, 230 volts, 50 Hz of capacity 260 ltrs or nearest higher standard size complete all as specified and directed.

Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 0.5 KVA

Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 2 KVA

INTERNAL WATER SUPPLY S&F of two way bib taps, cast copper alloy with all flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore complete all as specified and directed. MAKE : Jaquar KUP-35041PM or equivalent model of make Prayag / Marc / Kohler or equivalent as approved by the GE.

S&F of 15 mm bore brass chromium plated mixed for mixing hot & cold water screwed down for iron pipe and fixed (3-in-1) complete all as specified and directed. MAKE : Jaquar KUP-35125PM or equivalent model of make Prayag / Marc / Kohler or equivalent as approved by the GE.

S&F of 15 mm bore pillar Tap Mixer cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with leterred HOT and COLD complete all as specified and directed. MAKE : Jaquar KUP-35011BPM or equivalent model of make Prayag / Marc / Kohler or equivalent as approved by the GE.

Sub total

PROVISIONAL LUMP SUM

Construction of connecting passage from cook house / dining hall to existing Single Living Accn (constructed in Phase-I earlier) with permanent specification, RCC framed construction, seismic measures etc complete all as specified and as shown on drawing. TOTAL AMOUNT = ₹ 19,85,000.00 Add/deduct__________%(___________percent) ₹____________ Above/below Total cost is at par SSR-2020 rate, Bidder to quote total amount after considering percentage addition/deduction thereto to cover market variation over head and profit etc.

Construction of Football / Hockey Ground and Construction of Basketball Court complete all as specified, shown on drawing and as required at site. TOTAL AMOUNT = ₹10,20,000.00 Add/deduct__________%(___________percent) ₹ ____________ Above/below Total cost is at par SSR-2020 rate, Bidder to quote total amount after considering percentage addition/deduction thereto to cover market variation over head and profit etc.

Construction of 50 Users Septic Tank and Soak Well as per requirement complete all as specified, shown on drawing and as required at site. TOTAL AMOUNT = ₹ 5,00,000.00 (For one No. Septic Tank 50 Users + one No. Soak Well) Add/deduct__________%(___________percent) ₹ ____________ Above/below Total cost is at par SSR-2020 rate, Bidder to quote total amount after considering percentage addition/deduction thereto to cover market variation over head and profit etc.

ANUGRAH CONSTRUCTION PVT. LTD. (BID ID -3241739)

SOOD ASSOCIATES PVT LTD (BID ID -3241683)