Repairs to curtain wall of two numbers poly house of sizes (30mt x 12 mt) and (24 mt x 16 mt) at IIHRpoly house complex and at Block-3

Polyhouse (24 mt x 16 mt)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil for wall foundation

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:5:10 (1 cement: 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) for wall foundation, flooring and plinth protection

Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C – 50Kg/Cm2) in CM 1:6 including all scaffolding, curing, etc. complete For walls

Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Asian Tractor / Jonson Nicholson/Berger)

Polyhouse (30 mt x 12 mt)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil for wall foundation

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:5:10 (1 cement: 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) for wall foundation, flooring and plinth protection

Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C – 50Kg/Cm2) in CM 1:6 including all scaffolding, curing, etc. complete For walls

Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Asian Tractor / Jonson Nicholson/Berger)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Glazing: With 200-micron UV stabilized LDPE sheet (IPCL or equivalent make) and fixing it to the polyhouse etc. complete as per directions for sides bottom as per approved sample and brand for both the polyhouses

Providing and fixing Zig Zag spring with profile as per approved sample, to firmly mesh or polysheet as directed at site for both the polyhouse

Providing hoisting grinding cutting and welding 1’’ x 1’’ square G.I. pipe 300 rmt @ 1.69kg/mt for side horizontal and roof purlins including applying zinc rich primer and enamel paint to all cut and welded joints for both the polyhouses