Construction and Elivate Boundary Wall of Childrens Park in Ward No. 14

Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness.

Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within 50m lead

Earthwork in Hardsoil within 50.0M initial lead and 1.50M lift including dressing , Levelling and breaking clods and laying in layers not exceeding 0.30M depth as per direction of EIC.

Sand Filling as per approved drawing and technicalspecifications as per section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision)

Cement Concrete (1:3:6) with 4cm size crusher Broken granite metal including cost , conveyance and royalty etc. complete

R.C.C. work of M-20 grade with 20mm and down grade black hard granite Including Shuttering

Supplying, fitting and placing uncoated HYSD bar reinforcement

Brick work with Flyash bricks in C.M (1:6) in Foundation & Plinth ( Per One Cum) 23x11x8cm

M.S. angle Angle-Frame including fitting fixing & Barbed wire fixing arround the boundary wall with all material labour etc. complete

Galvanished Mild steel concertina wire fencing M.S. Barbed wire

Wall Painting 2 coats with weather paint of approved shade on wall surface to give an even shade including cost of brushes and putty including cost of paint scrapping , cleaning rubbing , scaffoding etc. ( Per one Sq. Mtr.) ( Dat per 10 Sqm) Including Cost of Materials & Labour.

Dismentling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris with un 50m lead (per 1 Cum) ( Data for 2.83 cum)

Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface

Supplying Fitting and fixing caramic tiles of minimum 16mm thick above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles , including rubbing & polishing etc.

Supply fitting and Fixing of facctory made single leaf rigid FRP composition door shutter of 32mm thick laminated with to GRP Skins with good grain finished fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsm E-Glass chopped strand mat with cost conveyance, labour T&P etc. complete required for the work.

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtrs C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with coist, conveyance, taxes of all materials, labour and T&P

Supplying all materials, labour T&P and laying in trenches and fixing on the wall with nails, bobbins and wooden/ PVC plug for u-PVC SLR pipes and fittings of approved make including jointing and testing all complete (75 or 110mm OD PVC SWR Pipes)

Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification

10mm Dia SCI P Tap

PVC Door Tee

PVC Plain Bend

PVC Cowl

PVC Bend

75 mm Plain Tee

75mm Plain Bend

Providing and fixing of 20mm cholrinated polyvinyle cholride (CPVC) pipes conforming to IS: 15778 having thermal stability for hot and cold water supply including all cpvc plain and brass trheaded fittings. This includes jointing of pipes and fitting with one steps cpvc solvent cement, trenching, refilling and testing of joints complete as per direction of engineer-in-charge.

Providing and fixing of 25mm cholrinated polyvinyle cholride (CPVC) pipes conforming to IS: 15778 having thermal stability for hot and cold water supply including all cpvc plain and brass trheaded fittings. This includes jointing of pipes and fitting with one steps cpvc solvent cement, trenching, refilling and testing of joints complete as per direction of engineer-in-charge.

Providing and fixing of 50mm cholrinated polyvinyle cholride (CPVC) pipes conforming to IS: 15778 having thermal stability for hot and cold water supply including all cpvc plain and brass trheaded fittings. This includes jointing of pipes and fitting with one steps cpvc solvent cement, trenching, refilling and testing of joints complete as per direction of engineer-in-charge.

Supplying all materials, labour T&P and fitting required for fixing of NP or CP brass or GM fixtures of following size or specification with leak-proof threaded joints tightened with spun yarn and white zinc or any other method as per required as directed including testing and rectification of defects after testing complete as per direction of engineer-in-charge.

15 mm dia cp angular-stop cock with wall flange Jaquar FLR-5053N

15mm dia cp bibcock with wall flange jaquar FLR-5047N

Supplying all materials, labours, T & P for fitting and fixing white glazed viterious chinawash down european water closet of 360x680x775 mm Jaquar model number CNS-WHT-755SS & cistern CNS-WHT-207 of approved make including all fittings with supply of

Supplying all materials, labours, T & P and fixtures for providing and fixing of white glazed viterious chinaware squatting stanard URINAL Hindware catalouge number 60003 with drainage waste pipe including cost of cement, sand, labout and T & P etc complete includingtesting cost, conveyance, royalty of all materials etc complete as per PH specification and direction of engineer-in-charge.

Supplying all materials, labours, T & P and fixtures for providing and fixing of white glazed viterious chinaware wash hand basin Jaquar model number CNS-WHT-811 with pedestal of size 560mmx 430mmx185mm with 32 mm dia waste pipe with cp waste coupling nut of jaquar make having cat number ALD 709 and 15mmx450mm pvc connection pipe of jaquar make having cat no. ALD 803 AB with ms bracket with wooden plugs cp screws including cost of cement, sand, labout and T & P etc complete includingtesting cost, conveyance, royalty of all materials etc complete as per PH specification and direction of ingineer-in-charge.

Supplying Providing & installation of MULTIPLAY STATION Prodcct Size: L35'xW20'xH10.5' MS pipe , FRP thickness 5-6mm. All equipment with powder coating 80- 90 micron mm as in required colour and pattern approved., all as per direction of Engineer-in-Charge/Consultants including cost of installation, transportation and taxes.

Supplying Providing & installation of 4 in 1 COMBO SET Prodcct Size: L20 'x W20' x H9 MS pipe ,FRP thickness 5-6mm. All equipment powder coating 80-90 micron mmas in required colour and pattern approved., all as per direction of Engineer-in-Charge/Consultants including cost of installation, transportation and taxes.

Supplying Providing & installation of STANDARD SEE SAW Prodcut Size:L 8 x W1.5 x H2 MS pipe ,FRP thickness 5-6mm. All equipment powder coating 80- 90 micron mm as in required colour and pattern approved., all as per direction of Engineer-in-

Supplying Providing & installation of 10 ft STRIGHT SLIDE MS pipe, All equipment powder coating 80-90 micron mm as in required colour and pattern approved., all as per direction of Engineer-in-Charge/Consultants including cost of installation, transportation and taxes.

Supplying all materials, Labour, Tools and plant, Tree Cutting Sissors

Supplying all materials ,Labour for cleaning and trimming tree etc full complete

Repair of Gandhi Dandi Statue

Add Phoptography & Display Board

Please Enable Macros to View BoQ information