Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 CrAccepted-AOC | ₹2.6 Cr | L1 | Accepted-AOC low |
| 2 | L2₹2.6 Cr+₹2.9 L (1.13%)Rejected-AOC | ₹2.6 Cr+₹2.9 L (1.13%) | L2 | Rejected-AOC high |
| 3 | L3₹2.7 Cr+₹11.9 L (4.65%)Rejected-AOC HOSHIARPUR | ₹2.7 Cr+₹11.9 L (4.65%) | L3 | Rejected-AOC high |
| 4 | L4₹2.8 Cr+₹26.4 L (10.3%)Rejected-AOC HOUSE NO 40 E PARTAP NAGAR PATIALA | PATIALA | PUNJAB | 140401 | ₹2.8 Cr+₹26.4 L (10.3%) | L4 | Rejected-AOC high |
| 5 | L5₹2.9 Cr+₹28.1 L (10.9%)Rejected-AOC 6 SWASTIK VIHAR PHASE 1 SECTOR 5 MANSA DEVI COMPLEX PANCHKULA HARYANA 134114 | PANCHKULA | HARYANA | 134114 | ₹2.9 Cr+₹28.1 L (10.9%) | L5 | Rejected-AOC high |
| Sl No | Description | Qty | Unit | Arunesh Gupta L5 | Ramesh Kumar L3 | NARESH KUMAR DUGGAL L4 | R S BUILDERS L6 | M/s Kamal Dev Sharma L2 | SUSHANT PURI L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. | 21,235.21 | Cum | 110 ₹23,35,873.1 | 104 ₹22,08,461.84 | 60.96 ₹12,94,498.4 Lowest | 71 ₹15,07,699.91 | 90 ₹19,11,168.9 | 94 ₹19,96,109.74 |
| 2.00 | Providing and filling sand grading as per specifications or
fine grade around the various sizes of G.I. pipes in external work. | 339.5 | Cum | 1,500 ₹5,09,250 | 1,000 ₹3,39,500 | 858.41 ₹2,91,430.2 Lowest | 1,560 ₹5,29,620 | 1,550 ₹5,26,225 | 1,500 ₹5,09,250 |
| 3.00 | Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type | 24.54 | Cum | 4,200 ₹1,03,068 | 4,200 ₹1,03,068 | 4,134.4 ₹1,01,458.18 | 3,851.51 ₹94,516.06 | 4,150 ₹1,01,841 | 3,850 ₹94,479 Lowest |
| 4.00 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth | 3.27 | Cum | 6,000 ₹19,620 | 6,000 ₹19,620 | 5,954.64 ₹19,471.67 | 5,951 ₹19,459.77 Lowest | 6,000 ₹19,620 | 6,000 ₹19,620 |
| 5.00 | Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. ;323.9 mm o/d thickness 5.6 mm including epoxy coating | 2,911 | M | 7,200 ₹2,09,59,200 | 7,000 ₹2,03,77,000 | 7,656.55 ₹2,22,88,217.05 | 7,701 ₹2,24,17,611 | 7,050 ₹2,05,22,550 | 6,998 ₹2,03,71,178 Lowest |
| 6.00 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth | 27.68 | Cum | 6,000 ₹1,66,080 Lowest | 7,500 ₹2,07,600 | 6,300.9 ₹1,74,408.91 | 6,251.51 ₹1,73,041.8 | 6,300 ₹1,74,384 | 6,000 ₹1,66,080 Lowest |
| 7.00 | 12.5 mm thick cement plaster 1:4 | 109.7 | Sq.Mtr | 250 ₹27,425 | 200 ₹21,940 | 213.86 ₹23,460.44 | 209.51 ₹22,983.25 | 180 ₹19,746 | 175 ₹19,197.5 Lowest |
| 8.00 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) | 51.13 | Sq.Mtr | 250 ₹12,782.5 | 220 ₹11,248.6 Lowest | 243.36 ₹12,443 | 243.51 ₹12,450.67 | 270 ₹13,805.1 | 240 ₹12,271.2 |
| 9.00 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item) | 15 | No | 500 ₹7,500 | 300 ₹4,500 | 250.52 ₹3,757.8 | 221.51 ₹3,322.65 | 250 ₹3,750 | 210 ₹3,150 Lowest |
| 10.00 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete | 2.83 | Qtl | 8,000 ₹22,640 | 8,000 ₹22,640 | 8,011.7 ₹22,673.11 | 8,011.21 ₹22,671.72 | 7,800 ₹22,074 | 7,100 ₹20,093 Lowest |
Tender Value
₹3.2 Cr
EMD Value
₹6.4 L
Closing Date
17 Oct 2025, 12:00 pmClosed
Executive Engineer,
Ropar Canal and Ground Water Division WRD Punjab
Estimate laying MS Main Riser pipes from RD 10 to Distribution Tank and providing , fixing air valve , scour valve, NRV etc incl. Commisioning , testing complete in all respt for prov. lift irrigation facilities vill Rampur Jhajjar Etc in dist ropar
2025_WR_148804_1
43/22A/2025-26
Open Tender
Pipe Laying Works
Item Rate
180 days
village rampur jhajjar near Shri Anandpur Sahib
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
₹6.4 L
Ropar Canal and Ground Water Division WRD Punjab
26 Nov 2025
3 Sept 2025
17 Oct 2025
4 Sept 2025
17 Oct 2025
4 Sept 2025
11 Sept 2025
Amount
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. ;323.9 mm o/d thickness 5.6 mm including epoxy coating
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
12.5 mm thick cement plaster 1:4
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)
Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete
Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete. C.I Double air valve (Size 40mm)
Providing & Fixing Stainless Steell Kirloskar/Leader Make Class 300 Sluice Valve 300 mm includingFlanges, Champion Rubber Join etc. AllFitting Complete in All Respect. Body CS ASTM A-216 GR/WCB BODY SEAT RING -SS CA 15/CS WCB +13% Cr. Wegde -cs wcb 13% Spindal & Gland Bush -ss AISI TYPE 410 YOKE SLEEVE SG- IRON GASKET-SPIRAL WOUND SS 304 +GRAPHOIL FILLED BODY STUDS -ASTM A 193 Gr B7 BODY BOLTS -ASTM A 194GR 2H ENDS- FLANGED DRILLED TO ANSI B16.5 , CL 300
Providing & Fixing Stainless Steell Kirloskar/Leader Make Class 300 BS 1868 NRV/CHECK VALVE 300 mm including Flanges, Champion Rubber Join etc. All Fitting Complete in All Respect. Body Cover & Hinge CS ASTM A 216 GR WCB DISC-CS WCB+13% Cr Body Seat Ring - SS CA/15CS WCB + 13% CR WASHER, HINGE PIN & SPLIT NUT -SS AISI 410 GASKET-SPIRAL WOUND SS 304 +GRAPHOIL FILLED BODY STUDS -ASTM A 193 Gr B7 BODY BOLTS -ASTM A 194GR 2H ENDS- FLANGED DRILLED TO ANSI B16.5 , CL 300
Providing & Fixing Stainless Steell Kirloskar/Leader Make Class 150 Sluice Valve 300 mm includingFlanges, Champion Rubber Join etc. AllFitting Complete in All Respect. Body CS ASTM A-216 GR/WCB BODY SEAT RING -SS CA 15/CS WCB +13% Cr. Wegde -cs wcb 13% Spindal & Gland Bush -ss AISI TYPE 410 YOKE SLEEVE SG- IRON GASKET-SPIRAL WOUND SS 304 +GRAPHOIL FILLED BODY STUDS -ASTM A 193 Gr B7 BODY BOLTS -ASTM A 194GR 2H ENDS- FLANGED DRILLED TO ANSI B16.5 , CL 150
Providing & Fixing Stainless Steell Kirloskar/Leader Make Class 150 BS 1868 NRV/CHECK VALVE 300 mm including Flanges, Champion Rubber Join etc. All Fitting Complete in All Respect. Body Cover & Hinge CS ASTM A 216 GR WCB DISC-CS WCB+13% Cr Body Seat Ring - SS CA/15CS WCB + 13% CR WASHER, HINGE PIN & SPLIT NUT -SS AISI 410 GASKET-SPIRAL WOUND SS 304 +GRAPHOIL FILLED BODY STUDS -ASTM A 193 Gr B7 BODY BOLTS -ASTM A 194GR 2H ENDS- FLANGED DRILLED TO ANSI B16.5 , CL 150
Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . (b)Using high intensity Microprismatic grade retroreflective Sheeting Type XI as per ASTM D 4956-09 and as per IRC 67 2012
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. (100 mm internal diameter)
Any Other Items
M/s Kamal Dev Sharma (BID ID -684840)
Ramesh Kumar (BID ID -684802)
NARESH KUMAR DUGGAL (BID ID -685325)
Arunesh Gupta (BID ID -683854)
R S BUILDERS (BID ID -684060)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.76 MB
BOQ_301059.xls
BOQ • 0.27 MB
GSTregardingLetter2.pdf
Tender Documents • 0.29 MB
ccess.pdf
Tender Documents • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .