Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | Not Admitted-Fee/PreQual/Technical/Finance R S MAIN ROAD MANALI POST THIRUTHURAIPOONDI TALUK TIRUVARUR DISTRICT 610210 | 610210 | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC | |
| 3 | Not Admitted-Fee/PreQual/Technical/Finance TAMIL NADU TN | THENI | TAMIL NADU | 625203 | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
Tender Value
₹60.3 L
EMD Value
₹60,250
Closing Date
2 Nov 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Managing Director
No.12 Thambusamy street,Kilpauk,Chennai
Construction of Direct Purchase Centre building in the Village of Alathur in Mannargudi Taluk in Thiruvarur District (Third call)
2023_TCSC_380715_1
80/CED5/007916/2023
Open Tender
Civil Works
Lump-sum
180 days
Alathur
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹60,250
12 Jan 2024
19 Oct 2023
3 Nov 2023
19 Oct 2023
2 Nov 2023
19 Oct 2023
Amount
CIVIL WORK
EARTH WORK excavation for foundation in all classes of soils and subsoi s to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.
Providing and laying crushed stone sand gravel mix (1:1) at the rate of 0.62 cu.m of filling crushed stone sand and 0.66 cu.m of gravel to consolidated 1 hide of 150mm designed to attain a CBR value of not less than 20 including cost and conveyance of crushed stone sand gravel from approved sources to work site and stacking them to the departmental gauge for premeasurement including labour charges for power roller watering and all other tools and plants employed including all other incidental charges etc., complete.
Supply and filling in foundation and basement with sand lime mix 1:2 in layers of not exceeding 150mm thick, well watering, ramming and consolidation etc., complete.
CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.
Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.
Supplying and Filling in foundation basement with conveyed earth with a lead of 10KM including conveyance, loading, unloading etc., complete as directed by the departmental officers.
Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column footing, Plinth beam , top tie beam etc.,
Column and sunshade
Cement Concrete 1:1½ :3 (one cement one and half sand and three aggregate) using 20mm gauge hard broken granite stone jelly including cost and conveyance of materials and labour charges for mixing, laying, compacting and finishing side shuttering wherever necessary. Curing etc., complete complying with standard specification and as directed by the departmental officers. In foundation and basement
In Ground floor upto 4.50M height above basement.
BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class Chamber burnt Bricks of size 9”x4 3/8 x2 3/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In foundation and basement
In ground floor upto 4.50M height above basement.
Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.
Plain Cement Concrete 1:2:4 (one cement two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including cost and conveyance of materials and labour charges for mixing, laying, compacting and finishing dewatering, side shuttering wherever necessary. Curing etc., complete for foundation etc., complete complying with standard specification, and as directed by the departmental officers.
Fabricating, supplying and fixing in position of Steel Windows (Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg./m and mullion 'J' section (F4B) of size 46 x 25 x 3mm at 2.28 kg./m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419 kg./m as specified in IS 7452 / 1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS Flat at 0.70 kg./m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly. 2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18 x 5mm MS flats are revetted to the shutters at an appropriate height in window.
Manufacturing supplying and fixing of Steel Door (Double Leaves) with the following specification MS angels of size 40 x 40 x 6mm are used for the outer frames and MS angles of size 35 x 35 x 5mm for the shutter frames stiffeners with 32 x 6mm MS flat is provided at required intervals in the shutter frame. 18 gauge CR sheet laid as panel in the shutter and welded intact. MS flat 18 x 5mm is welded over the 32 x 6mm MS flat sand witching the CR sheet in between additional stiffeners with 18 x 5mm MS flat is provided diagonally at the rear side of the shutter, 3 Nos. of hinges in case of single leaf and 6 Nos. of hinges in double leaves shutter to be provided. 6 Nos. of hold fasts 300mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2 Nos., one at the top and the other at the bottom are provided. 250 x 16mm size of two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking
Supply and erecting and hoisting of ISMB 300x140mm steel stanchion post including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts, nuts anchor bolt of approved quality hoisting aligning and glazing the trusses in position as per plan. The rate should include the cost painting the members with one coat or red oxide primer and zinc chromate etc., complete complying with standard specification and as directed by the departmental officers.
Fabricating and supplying and erecting the required number of trusses with structural steel members like angle iron MS plates for all truss members including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisitn aligning and glazing the trusses inposition as per plan. The rate should include the cost painting the members with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed by the departmental officers.
Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)
Supplying and fixing (under lintel grove) cold rolled ROLLING SHUTTERS of approved quality of 18 gauge 7.5 cm wide cold rolled lathe section in one piece interlocked together with specially designed pipe shaft with adequate number of high tensile steels wire springs of approved quality complete with brackets side guides and arrangements for inside and outside locking arrangements with push and pull operations and pulling back handle with all accessories without workmanship and the entire shutter painted with two coats of best quality anti-corrosive nut brown color paint over one coat of red oxide primer and clear opening of 1.8 M width 2.60 M height . The rolling shutter shall be placed below the lintel and behind the RCC curtain slab of 7.5 cm thick and 45 cm depth. Each rolling shutter shall be provided with one pair of approved quality of ball bearing complete. Rolling shutter should confirm to I.S.6248-1979 and should be got approved by the Executive Engineer before fixing in position. [This specification consists of the following component materials required for erection of rollingshutter (1).18 G 3” lathe section 1.90 M long-29 Nos.(2)10 G guide channel 2.60m long- 2 Nos.(3).13 G bottom plate for 1.8 M long with angle.(4) .M.S.pipe 40mm dia. C’Class –2M long.(5).10 SWG side plate 13”x12:-2 Nos.(6).2 SWG spring 3” bore.(7).’U’-clamp.(8).ball bearing suitable for 2 ½ “ pipe.(9).18 SWG clip suitable for 4: lathe.(10).20 SWG M.S.Sheet and (11).20mm square rod 1M long. The above materials will be inspected by A.E.E. at site before assembling and erection of Rolling Shutter]
PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.
Colour Washing two coats using best shell lime including cost of gum, kanjee, colouring bigmens brushes complete complying with standard specification and as directed.
Supplying and fixing with fine polished cuddapah stone slab of 38/ 40mm thick laid over Cement Morter 1:3 (one cement and three sand) 20mm thick to the cub-board, table and seating arrangements and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification
Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitutinol direction to avoid the lifting of roofing due to wind, the rate inclusive of neccesary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete for 42m length.
Manufacturing, Supplying and fixing in position of rain beating Rcc jally, 5 cm thick in cement concrete 1:2:4 using 20mm stone jelly, including cost and conveyance of all materials labour charges for mixing, laying, casting, curing and fixing in position of jolly as directed and cost of mould, fabrication of reinforcement, etc., complete.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_453733.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .