Repair and renovation of Class III Block B 24 no. quarters and other allied works in Canal Colony, Jalandhar

Amount

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade (inner portion)

Finishing walls with exterior decorative cement based such as snowcem, robbiacem etc. two or more coats to give an even shade (Outside quaters)

scraping © cement plaster

12.5 mm thick cement plaster 1:4

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

12.5 mm thick cement plaster 1:3 on floors

Cement rendering on plaster 1 mm thick

Factory manufactured flush door fixed in position iron hinges , etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position ( a ) commercial with elm or gurjan facing on both / sides laminated core and lipped edges:- (iv) 35 mm thick

Wire Gauge Imported teak wood door shutter without springs housed in chowkats. (30 mm thick)

Applying pink primer or aluminium priming coat on wood work including preparation of surface.

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b ) Glazing area above 0.09sqm (iii) 5 mm thick plate glass (INDIAN)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting two or more coats with synthetic enamel paint in all shades on old wood work or metallic or plastered, concrete surface to give an even shade including rubbing down old paint.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. (a) G.I. tank nipple 15 mm i/d

Providing and fixing in position Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Painting new letters and figures of black synthetic enamel paint to an even shade.

Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge.

Cement concrete 1:5:10 With stone aggregate 40mm gauge (mixing by manual means)

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. (C.P. brass Bib cock self closing)

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xii) 6/10amp. Two Way Modular Switch (One Module)

(xviii) Step type Modular Electronic Fan Regulator 100watts (One Module)

(xxvii) Bakelite Batten Holder (Large size)

(xiv) 6/10amp. One Way Modular Bell Push (One Module)

(xvi) 16/20amp. Universal Modular Shuttered Socket (two Module)

(xxvi) Ceiling Rose (Flush Piano type)

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (i) Overall size 6sq.mm (2Core) Un-armoured (On-Surface)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position.

Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut

Providing and fixing plastic hygenic seat cover with lid complete.Plastic Seat Cover Premium star white/pastel/special colour.

Providing and fixing PVC accessory fittings in Chinaware flushing cistern 10 Litres capacity complete.

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm stop cock Male and female end.

Providing & fixing in position on terrace (at all floor levels) HDPE tank cover for water storage tanks of approved make (to the approval of Engineer -in-charge) complete in all respect. For 1000 ltr capacity tank and above.

Providing and fixing in position C.P. brass overhead shower 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves

Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 20mm i/d G.I. Union.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (20mm i/d).

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (20 mm internal diametre pipe line.) 20mm internal diametre pipe line.

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect (50mm i/d Cast Iron Foot valves)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (ISI designation no. 1 (Size of door up to 700mm))

Yellow meranti Super (18 to 19 kg per cft. Approx.) cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) 25mm thick.

Providing Polyester Powder coating 50 micron any coloured specified to alumnum fittings various sizes including carriage of material from market to workshop & workshop to site of work..:- Tower Bolt 100mm to 300 mm Long

Sliding Bolt all Sizes

Handles all Sizes

Door Stopper

Dismantling cement conglomerate floors 25 mm to 50 mm thick without concrete base

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.

Providing & fixing glass strips 4mm thick in floors (a) 50 mm wide

Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite aterial (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly mfixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012

Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications.

White washing (two or more coat)

Orient electric ceiling fan

Bajaj exhaust fan

Round jali

Concealed disc

PVC manhole cover

45 w LED street light (Havells,crompton,syska etc.)

Vitreous Wash basin

1.2 Meter High G.I. Barbed Wire Fencing 1.2 meter high G.I. barbed wire fencing with 1.8 meter angle iron posts 40x40x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications.

Excavation of Soil using Hydraulic Excavator and Hydraulic Tractor Trolly I/C Cutting and loading in Trolley and transporting to the embankment locations with all lifts and leads. (Lead 4.5 kms pucca ):- Disposal/carraige from 0 upto 450m

Disposal/ carraige additional beyond 450m upto 1Km

Disposal/carraige for every additional 1Km upto 4.5 Km

THE NEW GONIANA CO-OP L & C SOCIETY LTD