SE/GC/TIN/C53/2019-20

Amount

Dismantling the existing damaged wooden Doors, windows and ventilators including frames, hinges and fastening including cost of lead,lift,etc complete.

Dismantling the existing damaged Cement mortar flooring and disposing away including cost of lead,lift,etc complete.

Dismantling the existing pressed tile & weathering course and disposing the waste materials away from thesite including cost of lead ,lift, labour etc., complete.

Brickwork in CM 1:3 mix using IInd class chamber burnt brick of size 9"x 4 1/2"x 2 3/4" including cost of all materials, labour, lead, lift, curing etc complete.

Supplying and fixing in position of single half Weld mesh 25mmx 25mm x10Gauge and half MS sheet of required size with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame and braced with 20 x 5 mm flat as per specification including concreting, plastering for re-fixing in place, cost of all materials, necessary fittings, aldrop, tower bolt , handle,lead, lift, transportation, etc complete.

Supplying and fixing in position of single MS sheet door of required size with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame and braced with 20 x 5 mm flat as per specification including concreting, plastering for refixing in place, cost of all materials, necessary fittings, aldrop, tower bolt, handle, lead, lift, transportation etc., complete.

Supplying and fixing in position of four / two weld-mesh 25mmx25mmx10Gauge and M S Sheet coverd grill window of required size with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame and braced with 20 x 5 mm flat as per specification including concreting, plastering for refixing place, cost of all materials, necessary fittings, transportation, lead, lift etc Complete.

Supplying and fixing in position of Double leaf door of required size with 35x35x5 mm ISA for door frame and 25 x 25 x 5 mm ISA angle for shutter frame, 25x4mm thick flat bracing as per specification including concreting, plastering for refixing place, cost of all materials, necessary fittings, aldrop, tower bolt , handle, lead, lift etc complete.

Floor finising with cm 1:3, 20 mm thick including cost of materials, labour, lead, lift etc complete

Paving the approved quality of verified tiles of size 600X600x8 mm over a base layer of Cement mortor 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including of all materials, labour, lead, lift, etc complete.

Paving the approved quality of anti skit ceramic tiles size 305X305x6 mm, over a base layer of Cement mortor 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc complete

Dadooing the wall with best approved quality glazed tiles of silze 300x200x6mm, over a base layer of Cement mortor 1:3, 12 mm thick and pointing with same coloured cement and finishing the joints including cost of all materials, labour, lead, lift, etc complete.

Plastering with CM 1:5, mix 12mm thick for walls including cost of labour, materials, lead, lift, curing etc complete.

Plastering with CM 1:3, mix 12mm thick for ceiling/water tank wall including cost of all materials, labour, lead, lift, labour, curing etc complete.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD-70)

Supply and run of 2 of 4 Sqmm(56/0.3) PVC insulated SC unsheathed cu.conductor of 110V on 7/20GI bearer wire for service connection mains.(SD.65)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 1 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) and phase bulb on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only (S.D-144)

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch, covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (For electronic regulator)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supplying and fixing box type 4' x 40W flouresent fittings complete with copper choke and condensor, (one number 4'x 40W tube) with T.W round block on wall or ceiling with PVC unsheathed leads from terminals to the fittings.

Supplying and fixing of 1400mm sweep (56") AC ceiling fan with requlator with 300mm down rod on the existing clamps of approved quality including cost of all materials, lead, lift, labour etc complete.

Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60 W bulb. (SD-80)

Supplying and fixing of 230mm SL Bracket with ISI fancy shade with 1 No. 18 W CFL bulb. (SD 82)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD-228)

Supplying and fixing in position of 15/12mm dia brass screw down bib cock of best quality including cost of materials lead, lift & labour etc complete.

Supplying and fixing in position of stainless steel sink of Size 600mmx450mmx 200mm with 32mm dia 'B' class GI waste water pipe & 32mm dia C.P waste coupling including cost of materials lead lift labour etc complete.

Supplying and fixing of Anodised Aluminium Towel rail 60cm long and 20mm dia with Brackets including cost of materials lead lift labour etc complete.

Supplying and fixing in position best quality PVC soil/ waste pipe 75mm dia 6Kg/Sq.cm, with ISI monogram including GI TEE, GI Elbow wherever necessary, cost of all materails lead lift, T & P, etc complete.

Supplying and fixing of 25 mm dia PVC pipe 10Kg/cm² of approved quality and best make with fixing GI specials including cost of all materails, lead, lift, T & P etc complete.

Providing and fixing in position Indian water closet ORISSA PAN of Size 580x440mm white glazed ware of approved make with P or S trap comforming to IS 2556 part XII (parryware or equivalent with sand cusion andd forming flooring around the closet using 40mm broken brick jelly concrete 1:2:5 100mm thick and finishing the top to required slope including cost of all materials lead lift etc complete. (1set)

Supplying and fixing in position cast iron Nahini/ Floor Trap with stainless steel grating of approved make and quality and size 100X75mm fixed over a bed of brick jelly lime concrete and finised with CM 1:3, including the cost of all materials, labour, lead, lift, T&P etc. complete.

Supplying and fixing of 110 mm dia PVC pipe including PVC bend, Elbow wherever necessary, including cost of all materails lead lift etc complete.

Supplying and fixing of 110 mm dia downfall PVC pipe including PVC bend, shoe wherever necessary and supporting pillar ,including cost of all materails lead lift etc complete.

White Washing one coat with shell lime including the cost of all materials, labour, lead, lift, T&P etc complete

Colour washing two coats with using Oil bound Distember over one coat of white cement primer after thorough scapping including cost of all materials labour lead lift, T & P, etc complete.

Painting 2 coats of approved quality of enamal paint over a primary coat for all exposed faces of new / old steel doors & windows and grill etc including cost of all materials , scrapping, labour, lead,lift etc complete.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials lead lift cost of binding wire etc complete.

Supplying and fixing Pre cast RCC slab 1:1.5:3 mix using 12 to 20mm metal for Cover slab including all cost of materails lead lift, binding wire, etc complete.

Providing weathering coarse with one coarse of pressed tiles of size 23x23x2cm embeded in CM 1:3, mixed with crude oil 10% by weight of cement and pointed with the same oil mixed CM 1:3 used over a bed of brick jelly 20mm size in lime the proportion (being 32:12.5)( No sand ) required thick 80mm with the required slope and beaten with wooden beaters including cost of all materials, labour, lead, lift, curing etc complete.

GST 12% as per Govt. Norms

Sp Constructions