Replacement of defective/burnt Tube fixtures, wires and accessories etc. in Police Station building Bharwain Distt. Una (HP)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.( Anchor/Finolex/Plaza make)as approved by the Engineer-In-charge.

2x4 Sq. mm.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required. ( SSK/Anchor/L&T)as approved by the Engineer-In-charge.

S.P. 5/ 6 Amps one way switch, piano type.

5 pin 5/ 6 Amps multisocket outlet, porcelain base/ piano type.

S.P. 15/16 Amps one way switch, porcelain base/ piano type.

6 pin 15/16 Amps multi socket outlet, porcelain base/ piano type.

S/F of step type fan regulator 100w (Deluxe) on the existing switch box/cover complete with connections etc. as required.( SSK/Anchor/L&T)as approved by the Engineer-In-charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required as approved by the Engineer-In-charge.

Single pole. Cat-A. (Hagger/ABB/L&T make)

Supplying and erection of Isolator 63 A capacity, 240 volts ‘C’ curves of following poles in the existing MCB DB complete with connections etc. as required. Double pole Category-A.(Hagger/ABB/L&T make) as approved by the Engineer-In-charge.

Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. L&T/ABB/Legrand as approved by the Engineer-In-charge.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-L&T/ABB/Legrand as approved by the Engineer-In-charge.

Double door-8way

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as require DU100D 4Pole as approved by the Engineer-In-charge.

63-80 A 18 KA (L&T/ABB/Legrand)

Providing and fixing MCCB enclosure for DU 100 D/DU MCCB following rating on the existing board complete as required. (L&T/ABB/Legrand make)as approved by the Engineer-In-charge.

Supplying and fixing surface mounting LED 12 watts die cast aluminium housing round down light for soft diffuse lighting cool white and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CCT CW complete with connections etc,as required. (Jaquar Nero Surface Code No.LNRO02R012SC/Wipro/Panasonic make)as approved by the Engineer-In-charge.

Providing and fixing LED surface/pendent mounting Tube fixture 22 watts LED batten aluminium housing high transmissibility diffuser CCT CW.complete with connections and as per best satisfaction of Engineer-in-Charge complete as required.(Jaquar code No LGLZU1X022XC /Philips/Panasonic//Tisva make) as approved by the Engineer-In-charge.

Supplying and fixing 4x1 ' Ultra Slim LED Tube fixture 33 watts surface mounting with HET plastic diffuser with CRCA powder coated housing efficacy> 100 Lumen per watts, CCT CW complete with all accessories, connections, testing and commissioning etc. as required (Jaquar cat no. LULU4SLO33XC/ Panasonic /Wipro make ) as approved by the Engineer-In-charge.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Finolex/Anchor/Plaza make) as approved by the Engineer-In-charge.

3x4 Sq. mm.

3x1.5 Sq. mm.

3x10 Sq. mm.

Supplying and fixing bakelite batten/angle holder includingconnections etc. as required:-Anchor/SSK

Supplying and fixing LED Lamp 9 watts , 6500K,900 Lumens 240 volts AC.supply 50 Hz in the existing batten holder,pendent holder,wall bracket & bulk head fitting etc, as required.Panasonic code PBUM01097/ Tisva/Philips make)as approved by the Engineer-In-charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Usha Aeroclean LD GBD/Crompton/ Orient as approved by the Engineer-In-charge.

Exhaust Fan, Light duty, 300 mm sweep

Supply and fixing exhaust fan Louver shutter for 300/380mm exhaust fan on the existing wall painting including 12 mm thick wooden ply board for suitable size of exhaust fan hole.National make as approved by the Engineer-In-charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Usha-Technixplus BEE 3star/ Crompton WWHE ISI mark 3 Star rated model) /Orient/Subse Tezz EE 03 3 star Rated as approved by the Engineer-In-charge.

(a) Ceiling Fan 1200 mm sweep,

Providing and fixing LED Street light 25 watts aluminium powder coated housing ,with Polycarbonate LENS for uniform light distribution ,and bracket of steel conduit pipe 65 mm., complete with all accessories,connections,testing and commissioning etc,as required. Cat.No. LTRUMP0025XC/CCT CW/Panasonic cat.No PSTM.01257,6000K,2500 lumen output make) as approved by the Engineer-In-charge.

Supplying and fixing LED Ultra Slim Panel 36 watts 2x2 'surface pendent mounting extruded aluminium coated body CCT CW complete with all accessories connections, testing and commissioning etc. as required (Jaquar code No. LULTSLS036XC/ Panasonic/ Philips make ),as approved by the Engineer-In-charge.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required as approved by the Engineer-In-charge.

Storage water heater, 35 Liter capacity Cat-A Recold CDR DLX/Usha Min . 3 Star rated

Supplying and fixing metal box of 7.9 x 9.9 x 4.6 cm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required as approved by the Engineer-In-charge.

Please Enable Macros to View BoQ information