8490 PERODICAL SERVICES TO INTERNAL AND EXTERNAL IN MD ACCN OF JCOS ORS DEFENCDE CIVILIANS QTRS AT VBV MAP I DCA AND 10 SIKH AREA UNDER AGE B R I OF GE (S) PUNE

Amount

M&L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper ( White or tinted ) on walls, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of white wash on ceiling surfaces after preparation of surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment, washing, scrubbing down, preparing and two coats of oil bound distemper over a coat of primer on walls, complete all as specified and directed.

M&L for complete removal of existing treatment and M&L for applying 2mm thick wall care putty and applying two coats of oil bound distemper on walls, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint white or tinted, on walls after preparation of surfaces, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces, complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint on steel surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces, complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick / concrete surfaces finished even & smooth without using extra cement including with a thin layer of sagol finish, complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed.

M&L for taking out small trees (dia of trunk n. exc. 2 inch), scrubes on wall and roof surfaces, making good to the distrubed surface by appropriate cement mortar including with necessary scaffolding, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 including triangular shape filleting in CM 1:4 on top edge, complete all as specified and directed.

M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer as in CM 1:6, complete all as specified and directed.

M & L for ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

M & L for ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in CM 1:4 including triangular shape filleting in CM 1:4 on top edge, complete all as specified and directed.

Dismentling of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick in CM 1:6 on stone masonry surfaces, complete all as specified and directed.

M&L for machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing with and including screed bed or bedding layer 15 mm thick in CM 1:6, complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :- (a) 15mm bore

(b) 20mm bore

Refixing old serviceable steel tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed for following size of pipe :- (a) 15mm bore

(b) 20mm bore

Supplying, fixing, jointing and testing galvanised steel tubing medium grade with all fitting and fixtures such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:- (a) 15mm bore

(b) 20mm bore

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding etc complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including S & F plastic water closet seat white closed pattern with flat bottom, cover and mild steel hinging device, complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc, complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, CP, fancy type, swan neck spout (Left) and aerator, Cat No. F2002104 of cera or of equivalent make as specified here-in-after, complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered " HOT" or " COLD" with long screwed shanks and fly nuts, complete all as specified and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 15 mm chromium plated 2 way bib cock with wall flange confirming to CAT No. F2002161 of " Cera" or of equivalent make as specified here in after, complete all as specified and directed.

S & F 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends, complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated, concealed, long shank with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia, complete all as specified and directed.

S & F gratings 100 mm dia of PTMT ( minimum wt 25 gms), complete all as specified and directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality, complete all as specified and directed.

S & F in repairs for health faucet including flexible cod confirming to CAT No. ALD-573 of make- Jaquar or of equivalent make as specified here in after, complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks of triple layers (cylindrical vertical with closed top) hoisted and fixed in position including brass tank nipple & ball brass ball valve with PTMT float & aluminium rod of suitable size, complete all as specified and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks of triple layers (cylindrical vertical with closed top) hoisted and fixed in position including brass tank nipple & brass ball valve with PTMT float & aluminium rod of suitable size, complete all as specified and directed.

S&F in repairs PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugd, complete all as specified and directed.

S & F transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132 or equivalent), complete all as specified and directed.

S&F in repairs stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" and of approved quality of finish, complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long.

Taking down wooden door shutter and refixing in including resecuring or easing and refixing in the same opening n. exc 1.00 sqm each, complete all as specified and directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening exc 1.00 but n. exc 2.00 sqm each, complete all as specified and directed.

S & F in repair 25mm dia aluminium powder coated curtain rods with fixing fancy type bracket, stops etc including taking down old one complete all as specified and directed by Engineer-In-Charge.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed by Engineer-in-Charge.

S&F precast RCC 1:2:4 type B-1 with using 20 mm graded stone aggregate as in manhole hole, gully trap etc cover slab including necessary reinforcement & form work etc, complete all as specified and directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 sq. m each and removed to store, complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping / frame to match, supplied and fitted to chowkats, complete all as specified and directed.

S & F 30 mm thick Ilnd class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a), complete all as specified and directed.

M & L for preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces, complete all as specified and directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings , complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel, complete all as specified and directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters, complete all as specified and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast, complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed.

S & F sheet glass 4 mm thick plain or tinted, fixed to aluminium frame in partition/window of area exc. 0.50 sqm, complete all as specified and directed. Note:- The cost of beading / rubber packing deemed to be included in unit quoted rates.

S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber/ aluminium frame work, complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm but n. exc. 2 Sqm each & removed to store, complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil puttyor fixed with beads, each pane n. exc 0.5 Sqm in area, complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for frosted glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area, complete all as specified and directed.

S & F in repairs hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 100 mm size, complete all as specified and directed.

Sunny Enterprises

M/s.BAJRANG CONSTRUCTION

SARATH ENTERPRISES

ANIL CONSTRUCTION CO.

RV. Enterprises