PROVISION OF CORRUGATED SHEET IN FRONT OF DILU AT BLDG NO P - 8 (ARMOURY) PROVN OF SHED, INTERLOCKING TILES AND PROVING POINT AT DSA

Amount

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil.

M&L for cement concrete Type B2 1:2:4 (40mm graded aggregates) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified.

S&F for plates Fe 410-W (Gde?E- 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment, complete all as specified.

S & F Rolled mild steel sections Fe 410-W (Gde?E- 250) quality A as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates,complete all as specified.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L preparation of new or previously untreated steel and iron surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint,and applying two coats of synthetic enamel paint over a coat of primer, complete all as sfd and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in any type of soil, all as specified.

M&L for 100mm thick broken stone or boulder,Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

M&L for plain cement concrete 100 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes, complete all as specified.

S&F heavy duty parking tiles 300 x300 x 15mm, laid and and jointed complete all as specified and directed. Make : Johnson endura(tactile series) or equivalent

M&L for Providing cement concrete of 1:2:4, type B1 (20mm greaded aggregate) in coping, roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and directed.

Removing excavated soil not exc 50m and depositing where directed at a level not exc 1.50m above the starting point.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240

S & F Plain, galvanised, mild steel sheeting 1 mm thick, in valley gutters (length and girth as fixed) with grade of zinc coating 275

S & F Rolled sections as in framing like fixed with angle cleats and connecting plates, etc.of Fe-410W(GdeE-250) quality complete all as specified and directed.

S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

S&F 110mm radius PVC (SWR) bends complete all as specified and directed.

M & L for Cement concrete in foundations, filling and mass concrete type D2 (1:4:8) 40 mm graded aggregate complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L for concealed Point wiring one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

All as per item No 15 herein before but one ceiling/exhaust fan point controlled by one, one way switch.

All as per item No 15 herein before but one 05 Amps socket outlet point on same board.

All as per item No 15 herein before but one switch socket outlet point 5 Amps on independent board.

All as per item No. 15 here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED high bay outdoor type lights fitting 1 x 100 watts, 220V,AC with in built driver, holder including LED lamp mounting hook and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing industrial air circulator wall mounted fan heavey duty 450 mm sweep 100 watts 1400 RPM approx air delivery 115 CFM including necessary fixing arrangement including welding drilling etc as directed

M & L for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm dia mm by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 40 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion. Note for Sl No 1 to 3 & 14 :- (i) GI earth lead wire upto 7.5m shall be included in the quated rate (ii) PCC chamber shall be provided 50cm away from the plinth of building. (iii) Any damage in existing items during the time of excavation rectify/replace the same without any extracost. (iv) The porecline insulator reqd for fixing the earth conductor is deemed to included in quated rate (v) Soils only using for returing filling of earth pits if additional soils reqd provided by the contrcator without any extra cost.(vi) Earthpit chambers installed after compating the earthpits by using pooring of water etc(vii) The cost of taking down the old earthing deamed to be included in quated rate .

Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

SEMBA ELECTRICALS (BID ID -3404664)

joepowercorporation (BID ID -3410977)

p.chinnasamy (BID ID -3405587)

K C ASSOCIATES (BID ID -3406377)

KRISHNA ENTERPRISES (BID ID -3407684)

TECKXPERT ENTERPRISES (BID ID -3404941)

KUMAR AGENCIES (BID ID -3405374)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3408800)

RISHAN INFRA ENTERPRISES (BID ID -3406240)