Development of Sports Complex at Sector - 19, Phase-I, Dwarka.

Supplying, Installation, Testing and Commissioning of Ozonator 450 grams/hr with oxygen feed gas, venturi, Ozone injection pump, NRV, tubing, control panel with SS-304 cabinet, water cooled, indication of power on/ ozone on/water low/oxygen low/ fault etc. As per Technical specification attached.

Supply, Installation, Testing&Commissioning of filtration Plant/De-Ozonization/Contanct tank equipments made out of Totally Anti Corrosive polyester with fiber glass filter of 1800 mm dia meter & 160 mm connection of approved color fitted with pressure guage manual air bleeder, water drain plug fitted with collected arms and diffuser made from unplasticised PVC and poly propylene inlet/outlet flanged connections, sand dump port, capable for a flow of 125m3/hr. with filttration Velocity of not more than 50m3/hr/m2 and working pressure of 2.5kg/sqcm

Supplying, installation, testing & commissioning of Valve Battery manifold made in PVC with flanges for connecting to filters consist of set of 5 nos Butterfly valves of size 160 mm for carrying out filteration,backwashing, rinsing and shut down of the filters including valve battery supports made out of zinc plated steel and support brackets with anti- vortex clamps For De-ozonization tank

Providing and filling of De-Ozonization Compound (IV-1000 or equivalent approved make) in the De-Ozonization Tank of the swimming pool ozonation system for catalytic destruction of residual ozone gas prior to venting to atmosphere, complete as required. The work shall include: Supplying IV-1000 catalytic de-ozonization media suitable for neutralizing residual ozone generated from the ozonation system. Filling of compound in one De-Ozonization Tank installed after the degassing section of the ozonation contact system. Media shall be chemically stable catalytic compound designed for continuous ozone destruction, non-corrosive, moisture resistant and suitable for ozone concentrations generated by swimming pool ozonation systems. Including transportation, loading, unloading, filling, leveling of media bed, testing and commissioning complete. Including all labour, tools, tackles and consumables required for proper filling and commissioning of the system as per requirement at site.

SITC of uPVC (Unplasticised Polyvinyl Chloride) pressure pipes Schedule-80 conforming to relevant standards, including supplying, laying, jointing, fixing and testing complete with all required fittings such as couplings, tees, bends, reducers, unions, flanges, gaskets, solvent cement joints, clamps, supports and connection to equipment, complete as required. 1) 150 mm dia (6 inch)

SITC of uPVC Butterfly Valves, lever operated, suitable for 10 kg/cm2 working pressure, with EPDM seat, complete with nuts, bolts, washers and all standard accessories, including set of flange adaptor with nut bolts, complete as required. i) 160 mm dia

Providing, laying, testing and commissioning of electrical power and control connections for Ozonation System, Ventury Pump, circulation pumps and associated electrical starters/control panels, including supply and laying of suitable size PVC insulated copper conductor armoured cables, cable glands, lugs, cable trays / clamps, ferruling, termination at panel and equipment end, earthing connections, testing and commissioning, complete as required and as per the requirement at site. The work shall include: Power cable from existing electrical panel/MCC to Ozonator panel Power cable to Ventury/dosing pumps and associated starters All glands, lugs, saddles, clamps, cable markers and termination accessories Proper earthing and testing of electrical connections Complete wiring required for safe operation of ozonation and allied equipment Unit: Job/Set (Complete)