Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹32.0 LAdmitted-Finance | +3.11% | ₹32.0 L | L1 | Admitted-Finance |
| 2 | L2₹32.7 L+₹67,966.60 (2.12%)Admitted-Finance | +5.30% | ₹32.7 L+₹67,966.60 (2.12%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹62,070
Closing Date
25 May 2026, 4:00 pmClosed
Er. Balbir Singh, Executive Engineer (E)BM-I
3rd Floor Mohan Singh Place BKS Marg Connaught Place, New Delhi
As per NIT
2026_NDMC_291575_1
NIT No. 11/EE(BM-I)E/2026-27
Open Tender
Electrical Works
Works
45 days
at 20th floor, terrace and AC plant Palika Kendra
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹62,070
26 May 2026
19 May 2026
25 May 2026
19 May 2026
25 May 2026
19 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and0.8mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm)cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air pre filters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. 25000 CFM. | 1 | Per Job | 9,67,575 | ₹9,67,575 |
| 2 | SITC of 100mm BUTTERFLY VALVE (MANUAL) with CI body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water circulation including buy back for old butterfly valve. | 2 | Nos. | 10,185 | ₹20,370 |
| 3 | SITC of 100mm Y-STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation including insulation & including buy back for old Y strainer | 1 | Per Job | 25,462.5 | ₹25,462.5 |
| 4 | SITC of 100mm BALANCING VALVE WITH BUILTIN MEASURING FACILITY With CI body flanged construction with EPDM coated disc with long pitch With protected out pipe insulation & PN16 pressure rating for chilled/hot water circulation including buy back for old balancing valve. | 1 | Nos. | 45,832.5 | ₹45,832.5 |
| 5 | Dismantling the existing ducts as in where required with the help of Ladder/scaffolding and SITC of new fabricated at site GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows vanes, hangers, supports etc. complete with 0.8 mm sheet thickness complete as Required at site. | 150 | Per Mtr | 3,259.2 | ₹4,88,880 |
| 6 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded essianene moulded pipe section of density20kg/cu.m after a thick coat of cold setting adhesive(CPRX compound) wrapping with 500g polythene faced essian and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing felt strip(as per IS:1322 as amended up to date)at joints repairing of damage to building etc.as per specifications and as required complete in all respect. 100mm dia.(50mm Thick insulation) | 15 | Per Mtr | 3,564.75 | ₹53,471.25 |
| 7 | Supplying and Replacement of existing damaged /worn out flexible canvas connection of AHU supply/return air duct with superior quality heavy duty fire retardant type flexible canvas connection including dismantling of unserviceable canvas connection etc complete as required at site. | 1 | Nos. | 5,092.5 | ₹5,092.5 |
| 8 | Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refillingetc. as per specification and as required complete in all respect. 300mm dia | 24 | Per Mtr | 9,543 | ₹2,29,032 |
| 8.1 | 250 mm dia | 70 | Per Mtr | 8,015 | ₹5,61,050 |
| 8.2 | 200mm dia | 18 | Per Mtr | 6,701 | ₹1,20,618 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.22 MB
BOQ_386958.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .