REVENUE FUND 2025-26-Repairs of maintance of ABC Center at Sandhaipettai in Tiruchengode Municipality .

Amount

Removing of AC Sheet of Shuttering Than Sheding Labour Charges

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification.

Supply and fixing in position of weld mesh door made with 7.50cm x 2.50cm 10 Gauge weld mesh and supported with 25 x 5mm M.S.Patta and framed with 35 x 35 x 5mm M.S. L angle including cost and conveyance of materials and all labour charges for welding, jointing and fixing in position etc., complete complying with SS.

Supply delivery and fixing of Thermocol false ceiling With aluminium channel support , screws and good quality etc complete.,

SUPPLY & INSTALLATION OF AIR-CONDITIONERWITH COPPER COIL of 1.5T capacity split AC including labour charges and cost of all materials etc

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) SD 17

Supply and fixing of 4' 18W Crystal Glass LED Tube Light Fitting including cost of labour and all charges etc.,

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter downrod on the existing clamp. SD 107

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains SD 67

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70

Earth work excavation in all soils and sub soils to full depth as may be directed by the departmental officers except in hard rock requiring blasting but inclusive of shoring, strutting and balling out water wherever nessasary and depositing the earth within initial lead of 10 metre and initial lift of 2 metre etc., complete as per Standard specifications SS

Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.In Cement Mortar 1:6

Plastering in cement mortar 1:5 mix (one Cement and five Sand) 12 mm thick etc., complete as per standard specification.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Providing granolithic floor finish of 50mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Wiring with 2 x 4 sq.mm. (56 / 0.3mm) PVC insulated SC unsheathed copper cable conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for open power plug point SD 13

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point SD 10

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting two coats with Ready Mixed Enamel Paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Suply and Laying Of GI Pipe and specials

20 mm GI pipe

15 mm GI Pipe

20 mm GI Coupling

15 mmGI Coupling

15 mm GI Bend

Brass chromium plated screw down Tap 15 /12mm Dia(Heavy Type)

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment, jointing with GI Specials and as directed by the TWAD Officers

15mm to 40mm dia

Supply and delivery of mini sigle door refrigirator of capacity 43l in ISI certified brand etc complete

Supply and delivery of examination table for dogs made of heavy duty stainless steel with a non-slip top surface including a cost of transportation to site etc complete

Supply and delivery of vertical auto clave machine with a outer wall made of mild steel, inside & lid with SS 304 / SS 316 / SS 316 L and working temperature of 121 to 135 degree celsius and working pressure of 15 to 32 PSI with a company waranty of 1 year etc complete (GEM Portal Rate)

Supply and delivery of S type office chair with arm rest including cost of all charges etc complete

Supply delivery and Laying of Self - Adhesive Tar Sheet including all Cost complete as per standard Specification

add GST 18%

S S INFRA (BID ID -1454971)