Recovery and Reconstruction of 207 no. of severely damaged Schools approved under PDNA 2022 of Barpeta District

Supplying and fixing piano type switch and socket on existing switch box/cover including connections etc. 5/6 amps switch for light power point.

Common light point/fan point wiring alongwith earth wire etc. (as per estimate).

Plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 including bed of dry brick ballast etc. Add 20% extra.

Providing and fixing M.S. steel door with frame of 40x40x6 mm angle iron and 3 mm M.S. sheet etc. Add 20% extra.

Brick on edge flooring with bricks class designation 7.5 on bed of 12 mm cement mortar including filling joints. 1:4 (1 cement : 4 coarse sand). Add 10% extra.

62 mm thick cement concrete flooring with concrete hardener topping. Add 20% extra.

Providing and fixing precoated galvanised iron profile sheets (roof sheets). Add 20% extra.

Providing and applying white cement based putty of average thickness 1 mm over plastered wall surface to prepare smooth surface complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats. Of area 3 sq. metres and below (Door/Window/Ventilator). Add 20% extra.

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 metres lead of: G.S. Sheet. Add 10% extra.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. In cement mortar. Add 20% extra.

Point wiring in steel conduit with piano type switch - Group A (light point/fan point/exhaust fan point/call bell point).

3 pin 5/6 A socket outlet.

2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire for common light point wiring from primary point to two secondary points as shown in drawing.

Supplying and embedding following G.I. pipe of medium class for cable entry/road crossing of cable etc including bending the pipe as required. 40 mm dia.

Providing and fixing precoated galvanised steel sheet roofing accessories. Ridges plain (500-600mm). Add 20% extra.

Barge board (Upto 300 mm). Add 20% extra.

8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with... (false ceiling). Add 20% extra.

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand).

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additive (New work - two or more coats) including priming coat of exterior primer.

Finishing with Epoxy paint (two or more coats) on steel work.

Repairs to plaster thickness 12mm to 20mm in patches of area 2.5 sq.m and under including cutting, raking out joints, preparing and plastering with cement mortar 1:4 (1 cement : 4 fine sand).

Supplying and fixing 415 V Isolator in existing MCB DB complete with connections, testing and commissioning etc. 40A.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand). Add 20% extra.

Supplying and filling in soak-pit with sand including watering, ramming, consolidating and dressing complete.

Earth work in excavation by mechanical means/manual means over areas (exceeding 30 cm depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Plinth protection 50 mm thick CC 1:3:6 incl. add 20% extra.

Reinforced cement concrete work in beams, suspended floors, roofs etc. above plinth level to floor five level 1:1.5:3.

Soak pit: Half brick masonry with common burnt clay F.P.S bricks in cement mortar 1:4.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing and applying primer etc. complete.

52 mm thick cement concrete flooring with concrete hardener topping including cost of cement slurry.

62 mm thick cement concrete flooring with concrete hardener topping incl. add 20% extra.

Extra for providing and fixing wind ties of 40x6 mm flat iron section.

Precoated galvanised iron profile sheets (roof sheets) incl. add 20% extra.

Premium Acrylic Smooth exterior paint with silicone additive (New work).

Dismantling doors, windows and clerestory windows (steel/wood) shutter including chowkhats; area 3 sq.m and below (Door/Window/Ventilator) incl. add 20% extra.

Dismantling roofing including ridges/hips/valleys/gutters etc and stacking within 50 m lead: G.S. sheet incl. add 10% extra.

Demolishing brick work in cement mortar incl. stacking serviceable material and disposal within 50 m lead incl. add 20% extra.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Polyethylene water storage tank IS:12701 marked (without fittings/base).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6.

Providing & fixing pressed steel door frames (Profile B) fixing with adjustable lugs.

Providing & fixing glass panes with putty and glazing clips in steel doors/windows/clerestory windows (4.0 mm thick glass panes).

Brick on edge flooring with bricks class designation 7.5 on bed of 12mm CM 1:4 incl. add 10% extra.

Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar including filling joints.

Chequered precast cement concrete tiles 22 mm thick in footpath/courtyard etc.

Cement concrete flooring 1:2:4 finished with floating coat of neat cement including cement slurry but excluding nosing of steps.

Cement plaster skirting up to 30 cm height with cement mortar 1:3 finished with floating coat of neat cement (18 mm thick).

Ridges plain (500–600mm) incl. add 20% extra.

Barge board (upto 300mm) incl. add 20% extra.

8 mm thick Calcium Silicate Board (false ceiling) incl. add 20% extra.

Providing & fixing mill finish Aluminium alloy roofing sheet (as per estimate text).

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade (New work - Two or more coats applied @ 3.84 kg/10 sqm).

Applying priming coat: with ready mixed pink or grey primer on wood work.

Finishing with Epoxy paint (two or more coats) prepared and applied as per manufacturer’s specifications, including appropriate priming coat, preparation of surface etc. complete (On steel work).

15 mm cement plaster on rough side of single or half brick wall finished with floating coat of neat cement 1:3.

Repairs to plaster 12mm to 20mm thick in patches; with CM 1:4.

Providing and fixing water closet squatting pan (Orissa pattern) complete.

Sand cast iron S&S as per IS-3989 (100 mm dia) bend with access door etc. complete.

Providing and fixing G.I. pipes complete with G.I. fittings etc. Internal work - exposed on wall. 25 mm nominal bore.

PTMT bib cock 15 mm nominal bore.

PTMT stop cock 15 mm nominal bore.

PTMT pillar cock 15 mm nominal bore.

CPVC pipes: 20 mm nominal dia pipes.

CPVC pipes (external work): 100 mm nominal dia pipes.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Anti-termite treatment: Treatment of soil under existing floors using chemical emulsion (Chlorpyriphos/Lindane E.C. 20% with 1% concentration).

0.5 HP single phase centrifugal monoblock pumpset with DOL starter etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing precast cement concrete in kerbs/edgings etc. set in cement mortar 1:1½:3.

Providing and laying in position specified grade of reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement. All work up to plinth level 1:1.5:3.

Reinforced cement concrete work in walls including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars etc. above plinth level to floor five level 1:1.5:3.

Steel reinforcement for R.C.C. work up to plinth level: Mild steel and Medium Tensile steel bars.

Steel reinforcement for R.C.C. work up to plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work above plinth level: Mild steel and Medium Tensile steel bars.

Steel reinforcement for R.C.C. work above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. for foundations, footings, bases of columns etc. for mass concrete.

RCC Staging: Centering/shuttering for suspended floors/roofs/landings etc.

Centering and shuttering for lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering for columns, pillars, piers, abutments, posts and struts.

Brick work with common burnt clay F.P.S. bricks (non-modular) of class designation 7.5 in foundation and plinth in cement mortar 1:6.

Half brick masonry (CM 1:3) incl. add 20% extra.

Half brick masonry with common burnt clay F.P.S bricks (non-modular) in superstructure above plinth level to floor V level in cement mortar 1:4.

Providing and fixing aluminium handles, ISI marked, anodised complete. Size 125 mm.

24 mm thick factory made PVC door shutters complete (for W.C. and bathroom door shutter).

Providing and fixing aluminium sliding door bolts, ISI marked, anodised complete. Size 300x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (AC 10 as per IS:1868) complete. Size 200x10 mm.

PVC single tee with door, 110 mm dia.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 metres lead of G.S. Sheet

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling the joints with same mortar, with common burnt clay non modular bricks 1:4 (1 cement : 4 coarse sand)

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 and top layer 12 mm thick cement hardener complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm thick with zinc coating 120 gms per sqm as per IS: 277

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm thick

Barge board (upto 300 mm)

Providing and fixing false ceiling framework with galvanised steel sections including 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process

Half brick masonry with common burnt clay F.P.S bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:3

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over plastered wall surface to prepare the surface even and smooth complete

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, new work (two or more coats)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat

PLINTH PROTECTION: Making plinth protection 50 mm thick of cement concrete 1:3:6 over 75 mm thick bed of dry brick ballast including excavation, levelling and finishing

Repairs to plaster of thickness 12 mm to 20 mm in patches including cutting the patch, raking out joints and preparing and plastering the surface of the walls complete

Supplying and filling in soak-pit with sand including watering, ramming, consolidating and dressing complete.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs etc. above plinth level to floor five level (1:1.5:3).

Soak pit: Half brick masonry with common burnt clay F.P.S bricks in cement mortar 1:4.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including primer etc.

52 mm thick cement concrete flooring with concrete hardener topping including cost of cement slurry etc.

Extra for providing and fixing wind ties of 40x6 mm flat iron section.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Providing and placing polyethylene water storage tank IS:12701 marked.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6.

Providing and fixing pressed steel door frames (Profile B) fixing with adjustable lugs etc.

Providing & fixing glass panes with putty and glazing clips in steel doors/windows/clerestory windows (4.0 mm thick glass panes).

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling joints.

Chequered precast cement concrete tiles 22 mm thick etc. Light shade pigment using white cement.

Cement concrete flooring 1:2:4 finished with floating coat of neat cement including cement slurry but excluding nosing of steps etc.

Cement plaster skirting up to 30 cm height with cement mortar 1:3 finished with floating coat of neat cement (18 mm thick).

0.56mm Aluminium profile roofing sheet complete as per estimate (cover width 1050mm etc.).

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade (Two or more coats applied).

Finishing with Epoxy paint (two or more coats) including appropriate priming coat, preparation of surface etc. complete (On steel work).

Painting with synthetic enamel paint of approved brand and manufacture (Two or more coats on new work).

15 mm cement plaster on rough side of single or half brick wall finished with floating coat of neat cement (1:3).

Providing and fixing water closet squatting pan (Orissa pattern) complete.

Sand cast iron S&S as per IS-3989 (100 mm dia) bend with access door etc.

Providing and fixing G.I. pipes complete with G.I. fittings etc. Internal work - Exposed on wall. 25 mm nominal bore.

Providing and fixing PTMT bib cock 15 mm nominal bore.

Providing and fixing PTMT stop cock 15 mm nominal bore.

Providing and fixing PTMT pillar cock 15 mm nominal bore.

CPVC pipes: 20 mm nominal dia pipes.

Providing and fixing CPVC pipes for hot & cold water supply including fittings etc. External work: 100 mm nominal dia pipes.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Anti-termite treatment: Treatment of soil under existing floors using chemical emulsion (Chlorpyriphos/Lindane E.C. 20% with 1% concentration).

0.5 HP single phase centrifugal monoblock pumpset with DOL starter etc.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing precast cement concrete in kerbs/edgings etc. set in cement mortar 1:1½:3.

Providing and laying in position specified grade of reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement. All work up to plinth level 1:1.5:3.

Reinforced cement concrete work in walls including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level to floor five level (1:1.5:3).

Steel reinforcement for R.C.C. work up to plinth level: Mild steel and Medium Tensile steel bars.

Steel reinforcement for R.C.C. work up to plinth level: TMT bars grade Fe-500D or more.

Steel reinforcement for R.C.C. work above plinth level: Mild steel and Medium Tensile steel bars.

Steel reinforcement for R.C.C. work above plinth level: TMT bars grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete.

RCC Staging: Centering and shuttering for suspended floors/roofs/landings etc.

Centering and shuttering for lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering for columns, pillars, piers, abutments, posts and struts.

Brick work with common burnt clay F.P.S. bricks (non-modular) of class designation 7.5 in foundation and plinth in cement mortar 1:6.

Half brick masonry with common burnt clay F.P.S. bricks (non-modular) of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4.

Providing and fixing aluminium handles, ISI marked, anodised complete. Size 125 mm.

24 mm thick factory made PVC door shutters complete (for W.C. and bathroom door shutter).

Providing and fixing aluminium sliding door bolts, ISI marked, anodised complete. Size 300x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised complete. Size 200x10 mm.

Supplying fitting and fixing PVC single tee with door (110 mm dia).

Dismantling doors/windows/ventilators including chowkhats; area 3 sq.m and below; incl. add 20% extra.

Dismantling roofing incl ridges/hips/valleys/gutters; G.S. sheet; incl. add 10% extra.

Demolishing brick work in cement mortar; incl. add 20% extra.

Brick on edge flooring with bricks class designation 7.5 on bed of 12mm CM 1:4; incl. add 10% extra.

62 mm thick cement concrete flooring with concrete hardener topping; incl. add 20% extra.

Providing and fixing precoated galvanised iron profile sheets; incl. add 20% extra.

Ridges plain (500-600mm); incl. add 20% extra.

Barge board (upto 300mm); incl. add 20% extra.

8 mm thick Calcium Silicate Board (false ceiling); incl. add 20% extra.

Half brick masonry CM 1:3; incl. add 20% extra.

12 mm cement plaster CM 1:4.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additive; incl. add 20% extra.

Finishing with Epoxy paint on steel work.

Plinth protection 50mm thick CC 1:3:6; incl. add 20% extra.

Repairs to plaster thickness 12-20mm in patches, CM 1:4.

Point wiring in steel conduit with piano type switch (Group A).

Common light point wiring from primary point to two secondary points.

5/6 A switch for light power point.

3 pin 5/6 A socket outlet.

GI pipe of medium class for cable entry 40mm dia.

415 V Isolator 40A.

Point wiring in steel conduit with piano type switch (Group A).

5/6 A switch (piano type).

3 pin 5/6 A socket outlet.

Common light point wiring from primary point to two secondary points.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6.

Providing & fixing pressed steel door frames (Profile B) fixing with adjustable lugs etc.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including primer etc.

Providing & fixing glass panes with putty and glazing clips in steel doors/windows/clerestory windows (4.0 mm thick glass panes).

Brick on edge flooring CM 1:4; add 10% extra.

Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar including filling joints.

Chequered precast cement concrete tiles 22 mm thick etc. Light shade pigment using white cement.

Cement concrete flooring 1:2:4 finished with floating coat of neat cement including cement slurry but excluding nosing of steps.

52 mm thick cement concrete flooring with concrete hardener topping including cost of cement slurry.

62 mm thick CC flooring with hardener topping; add 20% extra.

Cement plaster skirting up to 30 cm height with cement mortar 1:3 finished with floating coat of neat cement (18 mm thick).

G.I. pipe medium class for cable entry/road crossing 40mm dia.

Extra for providing and fixing wind ties of 40x6 mm flat iron section.

Precoated galvanised iron profile sheets (roof sheets); add 20% extra.

Ridges plain (500–600mm); add 20% extra.

Barge board (upto 300mm); add 20% extra.

Providing & fixing at all heights mill finish Aluminium alloy roofing sheet (0.56mm profile) complete as per estimate.

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade (New work - Two or more coats applied @ 3.84 kg/10 sqm).

Premium Acrylic Smooth exterior paint with silicone additive (new work).

Applying priming coat: with ready mixed pink or grey primer on wood work (hard and soft wood).

Finishing with Epoxy paint (two or more coats) prepared and applied as per manufacturer’s specifications, including appropriate priming coat, preparation of surface etc. complete (On steel work).

15 mm cement plaster on rough side of single or half brick wall finished with floating coat of neat cement 1:3.

Repair to plaster 12mm–20mm thick patches; CM 1:4.

Dismantling doors/windows/ventilators incl chowkhats; area 3 sq.m and below; add 20% extra.

Dismantling roofing incl ridges/hips/valleys/gutters; G.S sheet; add 10% extra.

Demolishing brick work in cement mortar; add 20% extra.

Providing and fixing water closet squatting pan (Orissa pattern) complete.

Providing and fixing European type W.C. pan with white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern etc. complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin.

Sand cast iron S&S as per IS-3989 (100 mm dia) bend with access door etc. complete.

Providing and fixing G.I. pipes complete with G.I. fittings etc. Internal work - Exposed on wall. 25 mm nominal bore.

Polyethylene water storage tank IS:12701 marked (without fittings/base).

PTMT bib cock 15 mm nominal bore.

PTMT stop cock 15 mm nominal bore.

PTMT pillar cock 15 mm nominal bore.

CPVC pipes: 20 mm nominal dia pipes.

CPVC pipes (external work): 100 mm nominal dia pipes.

415 V Isolator 40A.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Supplying and filling in soak-pit with sand including watering, ramming, consolidating and dressing complete.

Anti-termite treatment: Treatment of soil under existing floors using chemical emulsion (Chlorpyriphos/Lindane E.C. 20% with 1% concentration).

Earth work in excavation by mechanical means/manual means over areas (exceeding 30 cm depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge.

0.5 HP single phase centrifugal monoblock pumpset with DOL starter etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Plinth protection 50mm thick CC 1:3:6; add 20% extra.

Providing and fixing precast cement concrete in kerbs/edgings etc. set in cement mortar 1:1½:3.

Providing and laying in position specified grade of reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement. All work up to plinth level 1:1.5:3.

Reinforced cement concrete work in walls including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars etc. above plinth level to floor five level 1:1.5:3.

Steel reinforcement for R.C.C. work up to plinth level: Mild steel and Medium Tensile steel bars.

Steel reinforcement for R.C.C. work up to plinth level: TMT bars Fe-500D or more.

Steel reinforcement for R.C.C. work above plinth level: Mild steel and Medium Tensile steel bars.

Steel reinforcement for R.C.C. work above plinth level: TMT bars Fe-500D or more.

Reinforced cement concrete work in beams, suspended floors, roofs etc. above plinth level to floor five level 1:1.5:3.

Centering and shuttering including strutting, propping etc. for foundations, footings, bases of columns etc. for mass concrete.

RCC Staging: Centering/shuttering for suspended floors/roofs/landings etc.

Centering and shuttering for lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering for columns, pillars, piers, abutments, posts and struts.

Brick work with common burnt clay F.P.S. bricks (non-modular) of class designation 7.5 in foundation and plinth in cement mortar 1:6.

Soak pit: Half brick masonry with common burnt clay F.P.S bricks in cement mortar 1:4.

Half brick masonry with common burnt clay F.P.S bricks (non-modular) in superstructure above plinth level to floor V level in cement mortar 1:4.

Providing and fixing aluminium handles, ISI marked, anodised complete. Size 125 mm.

24 mm thick factory made PVC door shutters complete (for W.C. and bathroom door shutter).

Providing and fixing aluminium sliding door bolts, ISI marked, anodised complete. Size 300x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised complete. Size 200x10 mm.

PVC single tee with door of approved make; 110 mm dia.

Please Enable Macros to View BoQ information