Construction of Shed at Govt Degree College at Ramshehar Tehsil Ramshehar Distric Solan HP

Amount

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials for filling in roadways, embankments for grades improvement and leveling to required grades and then disposing of surplus excavated earth in acquired width of road or on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour,machineries,materials,tools equipments and safety measures and incidentals nrcessary to complete the work by mechanized means and labour (if any required) .All usefull materials, such as stones,shingles,aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects.

Filling in plinth with sand under floors including watering.ramming, consolidating and dressing complete as per the direction of the Engineer - in - Charge and according to HP.PWD specification 1990 volume -1.including carriage of all labour equipments and materials to various locations through all modes of transportation in all leads ,lifts and all incidental charges.

Providing form work with steel plates 3.15 (Three point One Five ) millmetress thick welded with angle iron in frame 30x30x5 (Thirty in to Thirty in to Five ) millmetress, so as to give a fair finish including centring,shuttering,strutting and propping etcetrawith wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels.Sides and soffits of beams, beam haunching cantilivers, girders, bressumers and lintels upto any depth/height as per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying cement concrete 1:6:12 (One cement: Six sand: Twelve graded crushed hard stone aggregate 40 (Forty) millmetress nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work in foundation and plinth, as per H.P.PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and laying cement concrete 1:1.5:3 [ One cement: One and half sand: Three graded crushed hard stone aggregate 20 (Twenty) millmetress nominal size]mechanically mixed, vibrated and curing complete to obtain the minimum crushing strength of M-20 (M-Twenty) grade in Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Brick work using first class common burnt clay building bricks in foundation and plinth (Second Class Bricks). in cement mortar 1:6 (one cement :six sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Brick work using first class common burnt clay building bricks in Super-structure above plinth level upto floor two level (Second Class Bricks). in cement mortar 1:6 (one cement :six sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Half brick masonry in 1st class common burnt clay building bricks in foundation and plinth in CM 1:4 (one cement :four sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Half brick masonry in 1st class common burnt clay building bricks in in super structure above plinth level upto floor two level in CM 1:4 (one cement :four sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

P/F partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately.Gypsum board 9.50 mm thick including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing mild steel. plain grills of required patterns in wooden frames of windows etcetra with mild steel. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material in all leads and lifts.

Providing and fixing plain square edged cover fillets with wood screws in ceiling and lining including carriage of material in all leads and lifts.

40 mm ( forty millmetres) Cement concrete flooring 1:2:4 (one cement :two sand : fourgraded stone aggregate 20mm nominal size) laid in one year finished with a floating coat of neat cement including carriage of materials within all leads and lifts.

Providing and fixing 40 mm ( Forty millimeters) wide and 4 mm (Four millimeters) thick plastic strips in joints of terrazzo floors including carriage of materials within all leads and lifts.

Providing and fixing 0.60 mm (zero point sixty millmetres)thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 ( five) microns primer coating to back coat of polyster of 5 ( five) microns over 5(five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of the Engineer-In-Charge.as per HP.PWD. specification 1990 volume-1, including carriage of all labour equipment and materials to various locations of site through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing mild steel. BP Sheet 1.66 mm ( one point six six millmetres ) to 2mm (two millmetres) thick in eaves /facia /soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials within all leads and lifts.

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 35X35X6 MM mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. single leaf doors.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. window side hung

Steel workwelded in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint in trusses and trussed purlins in building.. including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing mild steel round holding down or anchor bolts with nuts and washer plates complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

15 mm (Fifteen millmetres) cement plaster in single coat on rough side of brick/concrete/stone walls plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm (eighty millmetres) in girth and finished even and smooth in cement mortar 1:4 ( one cement : four sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

15 mm (Fifteen millmetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( one cement : four sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Wall painting ( two coats ) with plastic emulsion paint of approved brand and manufacturere on undecorated wall surface to give an even shade including throughly brushing the surfacre to give an even shade including throughly brushing the surface free from mortar droping and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing under layer for plinth protection of 75 mm (Seventy five millmetres) thick (unconsolidated) bed dry brick / stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing plinth protection 50 mm ( Fifty millmetres) thick in cement concrete 1:3:6 (one Cement :three Sand :six Graded stone aggregated 20 mm (Twenty millmetres) nominal size) including preparation of ground including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (Fifteen in to twenty two centimetres)in cement mortar 1:6 (one Cement : six Sand)and insideplastring with cement plaster 1:3 (one Cement: three Sand) including earth work andlaying 10 cm cement concrete in 1:5:10 (one Cement :five Sand : ten graded stone aggregate) of 40 mm( forty millmetres) nominal size and 7.5 cm ( seven point five centimetres) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm ( twenty millmetres) nominal size) and finished with a floating coat of neat cement complete as per standard design including preparation of ground including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Salim khan

JAI PAL

VIRENDER SHARMA