SUPA PARNER GROWTH CENTER Supa Industrial Area M and R to water supply scheme Providing services for operation and maintenance of pure water rising main from WTP to Supa Indl Area and Misc work for 1 years period

Amount

Providing services for operation and maintenance of pure water rising main

Providing services of unskilled manpower for watch & ward of 600 mm dia D.I. pure water rising main from Water treatment plant at Ahmednagar to BPT, 400 mm dia gravity main from BPT to HSR in Supa Parner Industrial park area as per detailed specification complete.

Providing services of skilled manpower for watch & ward at HSR in Supa industrial area & HSR in Supa Parner Indl. Park as per detailed specification complete.

Rent for JCB

Rent for poclain

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) (i) The Contractor at his request may be allowed to start construction of masonry steining so as not to allow silting of well in oncoming monsoon and while paying masonry, 25% amount shall be withheld and released only when excavation to the full depth is completed. (ii) Dewatering : Total dewatering charges are to be proposed in the tender as lumpsum amount and 75% is payable for excavation and 25% is payable for construction of well / gallery. Out of 75% excavation, break-up shall be as under 25% for last 1 M depth. 20% for 2 M depth which is just above last 1 M depth. 15% for 2 M depth which is just above last 3 M depth. 15% for the rest of depth from water table level. The above conditions will restrict the tendencies of agencies to avoid deepening of wells, etc. to the required depth.

MJ Collar/Coupling 8) 400 mm dia

11) 600 mm dia

Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete. (Excluding reinforcement and structural steel) For Foundation 1) In RCC M-150

Supply of pig lead of approved quality

Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.S.B.R. Gaskets for C. I. / D.I. Pipes 9) 450 mm

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).Dia of Pipe : 600.00 mm (I. D.) Thickness of pipe : 4) 8.00 mm.

Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified. 5 mm to 8 mm thick iii)) Above 500 mm. Upto 750 mm. dia.

Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. 8 mm.

Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. ii) Above 5 mm. Upto 10 mm.

Cutting C.I. / D.I. pipes (any class, wherever necessary) ( Rates excluding GST ) 400 mm diameter

600 mm diameter

Babasaheb Ramchandra Divate (BID ID -6949779)

ANIRUDDHA ARUNRAO KALE (BID ID -6973610)

Sanket Enterprises (BID ID -6971100)