Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.9 Craccepted-aoc | ₹1.9 Cr | accepted-aoc |
Tender Value
₹1.8 Cr
EMD Value
₹2.7 L
Closing Date
17 Feb 2026, 9:30 pmClosed
Engineering Wing of Health and Family Welfare Department
Technical Assistant 1
Construction of Pharmacy Room , Kitchen Room, Mortuary, Laundry, Compound wall and Other necessary work in the premises of Taluk Level Hospital in Maddur Taluk, Mandya District.
EWHFWD/2025-26/BD/WORK_INDENT1948
EWHFWD/2025-26/BD/WORK_INDENT1948
Open
Buildings
Two Tender Document System(Two Cover)
EWHFWD Chief Engineer Office Bengaluru
5 documents required · 5 mandatory
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs.90.00 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b).
Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2020-21 to 2024-25). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1) Earthwork Excavation / Filling/Embankment 302.00 Cum, 2) RCC/PCC 146.00 Cum, 3) Steel Reinforcement for RCC work 7.00 Tonnes, 4) BBM/SSM/Concrete block 209.00 Sqm, 5) Flooring / Dadooing (Vitrified/Granite/Ceramic/Cement concrete/ cladding) 1632.00 Sqm, 6) Plastering 1442.00 Sqm , 7) Painting 9260.00 Sqm Note:The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c).
Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.7.20 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).
Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.3.50 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).
The Tenderer or his identified sub-contractor should have executed OT works totaling to Rs.18.50 Lakhs in any one financial year. The valid license & letter of willingness of the sub contractor to be engaged for OT works should be obtained and uploaded in the kpp-portal.
KPWD Class-III and above Registration Certificate
Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2020-21 to 2024-25 updated to 2025-26 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2025-26 price level of existing commitments and ongoing works to be completed during the next 06 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No Of Persons 1) Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years (1 One) and 2)Electrical Engineer B.E. Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years.1(One).
Clause ITT 3.2(a):The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 360.00 Lakhs.
Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.54.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor.
₹4,500
₹2.7 L
17 Feb 2026
7 Feb 2026
18 Feb 2026
11 Feb 2026
12 Feb 2026
Construction of Pharmacy Room , Kitchen Room, Mortuary, Laundry, Compound wall and Other necessary work in the premises of Taluk Level Hospital in Maddur Taluk, Mandya District. (Civil Works)
2.5.ii.a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ... 3.83 100 m2
1.13 Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth ... 115.02 m³
1.14.1 Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru... 119.29 m³
1.15.1 Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru... 29.82 m³
4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr... 150.00 m²
1.11 Manual Means -
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ... 119.29 m³
1.23 Mechanical Means -
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater... 173.43 m³
2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 36.28 m³
2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ... 15.19 m³
2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ... 1.62 m³
2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ... 3.15 m³
2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 6.39 m³
2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 32.03 m³
2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 15.88 m³
2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 8.63 m³
2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 4.89 m³
2.11.a Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,... 8.68 t
5.2 Providing Coursed rubble masonry (first sort) with hard stone in foundation
and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead 70.06 m³
6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con... 248.44 m²
6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con... 13.23 m²
12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc... 0.35 m³
12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra... 3.00 No.
12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame... 7.56 m²
22.15.2 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- etc., complete with all lead 8.00 No
22.15.4 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- etc., complete with all lead 4.00 No
22.15.6 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm ---- etc., complete with all lead 12.00 No
22.15.9 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm ---- etc., complete with all lead 16.00 No
22.15.10 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- etc., complete with all lead 3.00 No
12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all... 3.00 No.
10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type
Fastener with t... 12.00 each
20.79 supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead 18.00 m
12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E... 31.50 m²
12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto... 1.20 m²
11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 865.62 kg
12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su... 4.95 m
12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 1.58 m²
12.59 Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700... 3.00 No.
8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an... 1358.74 m²
8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p... 156.60 m²
8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c... 380.76 m²
8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl... 497.35 m²
8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for... 219.00 m
8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ... 246.00 m
9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m... 152.56 m²
15.2 polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry... 966.22 m²
9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,... 3.00 m²
9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 151.29 m²
8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ... 8016.73 m²
8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai... 345.50 m²
8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ... 32.22 m²
8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt... 261.54 m²
8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean... 6.17 m²
8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e... 115.65 m²
19.3 Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.... 22.73 m³
19.7.3 Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i... 81.42 m³
19.9.2 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per directi... 28.01 m³
19.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead 87.18 m³
19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E... 26.46 m²
19.27.1 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.G.S. Sheet ---- etc., complete w... 74.98 m²
2.4.1.a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ... 9.60 100 m2
1.4.1 Manual Means -
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of... 42.73 m³
5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead 15.41 m³
7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g... 68.74 m²
6.3 Providing Brick work with common burnt clay modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement
: 4 coarse sand) including cost of all material... 22.05 m³
8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin... 93.48 m²
8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo... 93.57 m²
11.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, w... 3.15 m²
11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open... 143.64 kg
11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat... 824.88 kg
11.11.2 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar... 36.00 kg
8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan... 2836.02 m²
9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ... 143.00 m²
9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ... 166.22 m²
9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 475.77 m²
9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 506.72 m²
9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as... 15.99 m²
9.20.1 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi... 61.12 m²
7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c... 15.28 m³
9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti... 272.25 m²
2.16.viii Scarping Plaster in Lime or Cement Mortar from Brick/ Stone Masonry ---- etc., complete with all lead 308.25 m²
19.22.1 Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ... 1641.06 m²
2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 58.16 m³
20.103 Repairing door and window frames with available wood to the required
size. ---- etc., complete with all lead 56.70 m²
20.108 Repairs to existing Aluminium partition, refixing and relocating including cost of material,labour, complete as per specifications. ---- etc., complete with all lead 24.30 m²
20.50 Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per... 7397.77 m²
9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as... 61.12 m²
8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo... 308.25 m²
I-1.1A P-3 V-3 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum.& Cost of Haulage excluding Loading & unloading. Taking output 10 t load and lead 30 Km = 300 t.km.(135+12*5*1.35)=216. ----... 149.11 Cum
I-9.104 PWD S.R 2018-19 Providing & Fixing Mosquito mesh shutters made out of Stainless Steel mosquito proof mesh with 95% & above visibility which is fixed to the powder coated aluminium frame 20mm thick of approved shade. ... 229.51 Sqm
Construction of Pharmacy Room , Kitchen Room, Mortuary, Laundry, Compound wall and Other necessary work in the premises of Taluk Level Hospital in Maddur Taluk, Mandya District. (Water Supply & Sanitary Works)
13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the... 50.00 m
13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the... 100.00 m
13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi... 100.00 m
13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j... 50.00 m
13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j... 80.00 m
13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead 6.00 1 Multifloor trap
14.31 Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet... 1.00 each
14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ... 1.00 each
13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 ---- etc., complete with all lead 1.00 No.
14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting... 5.00 each
14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin... 1.00 each
14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 16.00 each
14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- etc., complete with all lead 16.00 each
13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931. ---- etc., complete with all lead 6.00 No.
14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 7... 1.00 each
14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- etc., compl... 1.00 each
13.28.1 Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour. - 15 mm nominal bore, weighing not less than 32 g ---- etc., complete with all lead 5.00 No.
13.2.1 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore ---- etc., complete with all lead 5.00 No.
13.4.2 Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore ---- etc., complete with all lead 1.00 No.
13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ... 7000.00 L
20.123 Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l... 40.00 each
13.17.4 Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 90 mm long, weighing not less than 93 g ---- etc., complete with all lead 25.00 No.
14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip... 10.00 each
10.1.6 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint... 128.00 m
13.50.2 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings... 120.00 m
13.50.3 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings... 120.00 m
13.5.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore ---- etc., complete with all lead 1.00 No.
10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint... 237.60 m
I-12.113.1 PWD S.R 2018-19 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and con... 25.00 Nos
Construction of Pharmacy Room , Kitchen Room, Mortuary, Laundry, Compound wall and Other necessary work in the premises of Taluk Level Hospital in Maddur Taluk, Mandya District. (Electrical Works)
I-2.2.1 P-5 V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 10.00 Point
I-2.2.2 P-5 V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 10.00 Point
I-2.2.3 P-5 V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 25.00 Point
I-3.4.1 P-8 V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1... 4.00 Each
I-3.4.2 P-8 V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3... 4.00 Each
I-3.4.3 P-8 V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4... 14.00 Each
I-3.4.4 P-8 V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6... 16.00 Each
I-3.4.5 P-8 V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8... 20.00 Each
I-3.4.6 P-8 V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1... 31.00 Each
I-3.5.1 P-8 V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 2.00 Each
I-3.5.2 P-8 V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 4.00 Each
I-3.5.3 P-8 V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 14.00 Each
I-3.5.4 P-8 V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 16.00 Each
I-3.5.5 P-8 V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 20.00 Each
I-3.5.1 P-8 V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 31.00 Each
I-3.6.1 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead 400.00 Each
I-3.6.2 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead 2.00 Each
I-3.6.3 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead 90.00 Each
I-3.6.4 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead 60.00 Each
I-3.6.9 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead 16.00 Each
I-3.6.10 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead 16.00 Each
I-1.13 P-4 V-6 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead 10.00 No
I-3.6.11 P-9 V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead 1.00 Each
I-12.2.1 P-48 V-6 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete wi... 2.00 Each
I-1.2.1 P-2 V-6 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab.... 80.00 Mtr
I-1.2.2 P-2 V-6 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab.... 200.00 Mtr
I-1.2.3 P-2 V-6 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab.... 50.00 Mtr
I-1.5.2 P-2 V-7 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box ---- etc., complete with all lead 25.00 Each
I-2.3.1 P-2 V-8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 1400.00 Mtr
I-2.3.2 P-2 V-8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 1400.00 Mtr
I-2.3.3 P-2 V-8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 900.00 Mtr
I-2.3.4 P-2 V-8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 1100.00 Mtr
I-2.3.5 P-2 V-8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 100.00 Mtr
I-5.19.8 P-18 V-6 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's s... 1.00 Each
I-5.19.9 P-18 V-6 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's s... 2.00 Each
I-5.18.1 P-17 V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 12.00 Each
I-5.18.3 P-17 V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 10.00 Each
I-5.18.9 P-17 V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 2.00 Each
I-5.20.1 P-18 V-6 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete with all lead 1.00 Each
I-32.05 P-13 V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,... 0.10 Km
I-21.05 P-52 V-6 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead 0.10 Km
I-21.07 P-52 V-6 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 120 to 240 Sqmm ---- etc., complete with all lead 0.10 Km
I-12.56 P-54 V-6 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.
cutouts and other equipment's on the meter board using 40 mm dia
2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 3.00 No
I-12.58.2 P-54 V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead 5.00 Mtr
I-11.3.2 P-43 V-6 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V... 117.00 Each
I-11.11.5 P-47 V-6 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per watt, lifegrea... 25.00 Each
I-3.14.7 P-10 V-6 Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board. 6A Batten Holder
N ---- etc., complete with all lead 40.00 Each
I-6.1 P-30 V-6 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead 3.00 Each
I-6.4.1 P-30 V-6 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated ... 10.00 Each
I-11.8.1 P-46 V-6 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 2.00 No
I-13.7.1 P-56 V-6 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire... 122.00 Each
I-13.11 P-57 V-6 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt... 50.00 Each
I-13.13 P-57 V-6 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w... 3.00 Each
I-5.42.2 P-20 V-6 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,... 50000.00 Sq CM
I-5.40.1 P-20 V-6 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i... 5.00 Mtr
I-5.41.1 P-20 V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 5.00 Mtr
I-5.41.4 P-20 V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai... 5.00 Mtr
I-5.15.9 P-16 V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle... 1.00 Each
I-5.18.8 P-18 V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci... 1.00 Each
I-5.33 P-19 V-6 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo... 1.00 Each
I-5.30 P-19 V-6 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete with all lead 3.00 Each
I-1.1.1 P-2 V-6 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R... 50.00 Mtr
I-1.1.2 P-2 V-6 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R... 50.00 Mtr
I-1.1.3 P-2 V-6 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R... 50.00 Mtr
4.1.1 SR 2018-19 Supplying and fixing PBBC/bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. (20/4.1.1)Group 'A' ---- etc., complete with all lead 120.00 Each
I-12.46 P-52 V-6 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead 20.00 Each
I-11.8.2 P-46 V-6 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 5.00 No
I-4.2.3 P-11 V-6 Fabricating, supplying and erection of...ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 100 25 grade S355 JO steel plate for shaft, IS2062 for base plate with door opening arrangements, i... 5.00 Each
I-4.6.1 P-13 V-6 Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for
out door luminaries and mounted on Octagonal pole using necessary
bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Stand... 5.00 Each
I-6.3.1 P-30 V-6 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal... 40.00 Each
I-32.17 P-13 V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 185 Sqmm... 0.10 Km
I-29.02 P-63 V-6 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a... 70.88 Cum
I-7.2.1 P-34 V-6 Supplying ...litres capacity vertical/horizontal type wall mounting
Electrical water heater with 22 SWG copper/SS sheet metal inner
Container tinned inside Fiber body outside, filled with glass wool
Construction of Pharmacy Room , Kitchen Room, Mortuary, Laundry, Compound wall and Other necessary work in the premises of Taluk Level Hospital in Maddur Taluk, Mandya District. (Dryer and Freezer)
A.R 75 KG LOADING CAPACITY
Usage/Application
Laundry/Hospital/Hotels
Electric/Steam/Gas
Stainless Steel
Automation Grade
Aut... 1.00 Nos
A.R 3 Body Mortuary Cabinet, 8 Feet, For Hospital STANDARD DESIGN FEATURES Dimensions
Width: .38 in./ 97 cm.
Depth: .97 in./ 246 cm.
Height: .106 in./ 269 cm.
Width: .27 in./ 69 cm.
Height: .22... 1.00 Nos
Construction of Pharmacy Room , Kitchen Room, Mortuary, Laundry, Compound wall and Other necessary work in the premises of Taluk Level Hospital in Maddur Taluk, Mandya District. (Modular OT)
9.17.4 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm... 50.00 m²
9.41 Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/m2 on existing Concrete substrate of 25Mpa or... 42.00 m²
A.R Providing and fixing 50 mm thick prefabricated walkable alumium grade panels ceiling The panel should have a composite construction of two skins, alumium grade 3003/100 and other side sheet is PPGI sh... 42.00 Sqm
A.R Supplying and Fixing Single Leaf Self Closing with Vision Panel Door. Providing and Fixing of ABS door Frame, with 35 mm thick ABS door Single Shutter with 1.35 mm fabricated ""KOREAN ABS SHEET"" layi... 2.10 Sqm
A.R Supplying and Fixing HERMATICALLY SEALED STAINLESS STEEL SLIDING DOOR Providing, fabrication and fixing of manually operated hermetically sealed stainless steel sliding door of size1500 x 2100mm. The ... 3.50 Sqm
A.R Supplying and Fixingof 2'x2' LED recessed luminarie with…. Watts system wattage. Housing shall be with pressure die cast aluminium alloy with corrosion proof resistant polyester powder coated. Drive... 8.00 Each
A.R Supplying and Fixing LED - X-Ray Viewing Screen :X-RAY VIEWING SCREEN: - Two Plate X-Ray View Screen with flicker free illumination having imported LED system for uniform illumination and operated by ... 1.00 Each
A.R Supplying and Fixing Magnetic Writing List Board:Magnetic Writing Board of size 940 x 640 x 50 mm comprises of a flush mounted, 1.50 mm thick, white laminate board, bonded to a 10 mm high density fibr... 1.00 Each
A.R Plenum Laminar Flow :
Supply and installation of Stainless steel 304 grade Plenum LAMINAR FLOW- Plan air Ceiling mounted system with unidirectional airflow,(Air flow velocity of 25 to 35 FPM) Plenum u... 1.00 Each
A.R Supplying and Fixing STAINLESS STEEL STORAGE UNIT:Providing and supplying Storage Unit of size 800x1900x350 mm has made of 0.8.mm thick SS304 grade sheet. The exterior openable glass doors shall be ma... 1.00 Each
A.R Supplying and Fixing PASS/HATCH BOX:Providing and fixing Hatch box for modular OT in stainless steel SS 304, SS Handles, SS Hinges, View window, Door close/open indication, Electromagnetic door interl... 1.00 Each
A.R Supplying and Fixing OT control Panel 6 Tile : Supply and installation of 6 tile OT control panel with distribution box, control panel will be mounted flush in the theatre wall, comprising of the foll... 1.00 Each
A.R Providing & fixing SS304 grade return air grill. The cut out for return air grill size in panel is 600mmX450mm. The cost includes cost of material, labour charges for fixing etc complete.
A.R SUPPLY ERECTION TESTING & COMISSIONING of Return air riser made out of SS 304 grade with 18 SWG in the clean room area of 1000 CFM and provision for return air collar damper anf grill with all concted... 4.00 Each
A.R Supplying and Fixing Providing and making trap door of size 600 x 600mm in the ceiling panel by cutting. The required frame work shall be made by using Aluminium sections. The cost includes cost of ma... 1.00 Each
A.R AHU's RECYCLE SYSTEM FOR OT AREA AS PER NABH NORMS
SUPPLY ERECTION TESTING & COMISSIONING Air handling units of GSS powder coated sheet metal cabinet type Double skin Recirculatory type 40-45 mm thic... 1.00 No
A.R AIR COOLED CONDENSER UNIT & COPPER PIPING
SUPPLY ERECTION TESTING & COMISSIONING 5.5 TR Air cooled out door condensing units comprising of semi -hermetic / hermetic reciprocating/scrool compressors wi... 2.00 No
A.R GRILLE & DAMPER
SUPPLY ERECTION TESTING & COMISSIONING Collar damper made out of Al. with powder coated as per return air openinig size. ---- etc., complete with all lead 2.00 Sqm
A.R SUPPLY ERECTION TESTING & COMISSIONING Aluminium Volume control dampers manual operated, Only for hepa module, unit mouth & branch Ducts
---- etc., complete with all lead 2.00 Sqm
A.R SUPPLY ERECTION TESTING & COMISSIONING Fire Dampers with Fusible Links rated for 72deg C for AHU mouth, with fire damper actuator with inter link with AHU controll panel in case of fire AHU motor shou... 1.00 No
A.R SUPPLY ERECTION TESTING & COMISSIONING Fire retardant flexible connections for AHU supply & return air mouth
---- etc., complete with all lead 2.00 No
A.R DUCTING & INSULATION
SUPPLY ERECTION TESTING & COMISSIONING Al. ducting including the supports,selicon sealent with painted MS angle flanges.
---- etc., complete with all lead 120.00 Sqm
A.R SUPPLY ERECTION TESTING & COMISSIONING Supply & return air duct Insulation with factory laminated Al. foil class 'O' grade
13 mm thk for return air duct
---- etc., complete with all lead 60.00 Sqm
A.R SUPPLY ERECTION TESTING & COMISSIONING Supply & return air duct Insulation with factory laminated Al. foil class 'O' grade
19 mm thk for supply air duct
---- etc., complete with all lead 70.00 Sqm
A.R Polishield covering with two coats paint for exposed duct
---- etc., complete with all lead 60.00 Sqm
A.R SUPPLY & Fixing 300 dia Insulated flexible connection for grille module & return air raiser
---- etc., complete with all lead 20.00 Rmtr
A.R 25 mm PVC dia drain piping with supports for AHUs
---- etc., complete with all lead 50.00 Rmtr
A.R ELECTRICAL & CONTROLLS
"SUPPLY ERECTION TESTING & COMISSIONING Ele.controll panel inter lock with AHUs and 5.5 TR 2 nos condenser unit with TEMP. & RH Controller
---- etc., complete with a... 1.00 Set
A.R SUPPLY ERECTION TESTING & COMISSIONING 4 Kw Ele. Heater with RH controller to controll humidity of 50 to 60%
---- etc., complete with all lead 1.00 Set
A.R Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed su... 50.00 Mtr
A.R Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed su... 50.00 Mtr
A.R Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed su... 30.00 Mtr
A.R Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed su... 30.00 Mtr
A.R Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and PVC insulation and sheathed su... 30.00 Mtr
A.R SUPPLY & Fixing Cable trey
300 width x 50 ht perforated. ---- etc., complete with all lead 30.00 Rmtr
A.R Plate COpper Earthing strip 24 x 3 mm connected to existing earthing.
---- etc., complete with all lead 40.00 Rmtr
A.R SUPPLY & FIXING DP Gauge range 0 to 6 mm wg for OT room to monitoring positive pressure
---- etc., complete with all lead 1.00 Nos
A.R SUPPLY & FIXING DP Gauge range 0 to 50 mm wg for AHU & EAU pre & fine filter section to monitoring pressure drop in the filters
---- etc., complete with all lead 2.00 Nos
A.R Supplying & Fixing Single Arm Rotating OT Pendant: Single ARM 320 Deg Rotating Anesthesia Pendant Complete with Electrical Outlets (8 Nos), Data Points (1 Nos) and Medical Gas Outlets (7 Nos), 1 Monit... 1.00 Nos
A.R Scrub Station
MOT SCRUB STATION (minimum size 1500 mm)
supply , installation and commissioning of compact surgical scrub sink shall be designed for use in OT area for pre-procedural scrub. Double sin... 1.00 Nos
A.R Supply , installation, testing and commissioning OT surgical Lighting system with connected accessroies
MOT surgical lighting system shall provide an ideal combination of brightness, manoeuvrability ... 1.00 Nos
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Technical specification.doc
Others - Technical Specification • 0.27 MB
Kw4- In 1948 Maddur.docx
Tender Document • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .