SPECIAL REPAIR OF MEDIA CENTRE AT SIRSA IN SIRSA DISTT.

Amount

Scraping of white wash and colour wash. (HSR.8.32 (a)

Cement concrete 1:3:6 with stone aggregate 20 mm nominal size in foundation and plinth (HSR.10.40)

Providing and laying 80mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35, over a bed of 30 mm thick fine sand complete in all respects. (HSR 10.159)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR.11.9)

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) size of ceramic glazed tiles 300 x 450 mm [HSR 14.92(b)].

12mm thick cement plaster 1:4 (HSR. 15.5)

Cement pointing 1:2 deep variety on brick and tile work (Ch. 15.60)

Cement pointing 1:2 flush on brick on edge flooring HSR(15.70)

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete (HSR. 16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coat on old distempered work (HSR. 16.60)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including the surface to required finish complete (HSR. 16.1)

Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR. 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered of concrete surfaces to give an even shade.( HSR. 16.3)

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil , varnish and chalk mitti including finishing surface to the required finish, complete. (HSR.16.24)

Providing two coats of exterior acrylic emulsion paint (b) 1st quality (HSR. 16.79-b)

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick exceeding 40 sq dm. areas (HSR.18.30-b)

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doorsopen able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Providing and fixing fiber sheet 4mm thikness (N.S)

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (a) single trap syphonic W.C. Suite (i) White [HSR 30.5 (a) (i)].

PROVIDING AND FIXING IN POSITION BEST INDIA MAKE(to the approval of the Engineer-in-charge). INDIAN TYP ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor with, raised foot treads COMPLETE WITH 100 MM H.C.I.’P’ TRAP with or without vent as required and all OTHER NECESSARYFITTING as fully described in item no.30.1 above. (c) size 680 mm (iii) Mixed Colour (HSR 30.2-C-iii)

EXTRA OVER Item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREOUS CHINA WARECISTERN complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings. White (HSR 30.12 i)

Providing and fixing in position best indian make (ordinary) lavatory suites consisting of lavatory in vitreous chinaware size as given below (to the approvalof the Engineer-in-charge) including china plug for tap hole where necessary; RS or C.I Brackets for building into wall including painting; 32 mm C.P. Brass waste with C.P. brass chain and rubber plung; 15 mm C.P. Brass screw down piller tap with jamnuts or couplings best design (as approved by the Engineer-in-charge) All fittings Best Indian make and; to the approval of the Engineer-in-charge. All brass work chromium plated and complete in all respects including cutting and making good the walls, floors and Painting of fittings etc.White (IV) -size 550 mm x 400mm with one no tap (HSR. 30.41-white-iv)

Providing and fixing in position 15mm i/d C.P brass bib cocks of best quality (as required by the Engineer-In-Charge)( HSR.30.75-c) (c) bib cock

Providing and fixing in position best indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos chromium plated brass screws and washers over rubbed washers and rawl plug embedded in the wall for chromium plated brass clamps with C.P. brass screws (as required by Engineer-in-charge) complete including cutting and making good the walls etc. (a) Indian make (i) 600 mm x 450 mm (HSR.30.71-a-i)

Providing and fixing in position best quality stainless steel sinks with complete fittings as fully described in item no. 30.51 above(a) 600mm X 450mm X 200mm-(HSR 30.53 -a)

Providing & Fixing of G.I. Pipes 15 mm internal dia (NS)

Providing & Fixing of G.I. Pipes 25 mm internal dia (NS)

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWAL PLUGS WITH C.P.BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOODS THE WALLS ETC. (a) with c.p. brass brackets and guard rail (i) 600mm X 125mm (HSR 30.69-a-i)

Metro Infra Solutions