TRANSPOTATION OF MATERIAL

Amount

DANNEXURE I: WORK

Detail survey including preparation of schedule of material, marking of location (rout length) GPS survey of ling with coordinates of each tower.

Check survey and final peg marking.

Excavation of earth for 02 No. C +15 & 01 No. B+5 type tower as per profile and specification @222.913x2 M³ and B type foundation @ 153.79 M³ for each tower including all earth work , back filling & leveling etc..

Shifting and loading of 02 Nos. C+15 type and 01 No. B+5 type stub at EFU Naini. Transportation of the same from Naini to Ledhupur substation. Unloading and shifting the same at Ledhupur substation.

Shorting of 02 No.s C+15 & 01 No. B+5 type tower part mark wise including stub & templates at 132KV substation Ledhupur shifting of the same from stacking place to loading point and loading on private vehicle. Transportation from Ledhupur to Village Shungulpur Near Chaubepur Bypass, unloading at site.

Stub setting including all foundation work but excluding the cost of concerting for 2 No. C+15 & 1 No. B+5 type tower.

Concreting in ratio 1:2:4 for 02 Nos. C+15 type tower @ 54.610 M³/Tower & 01 No. B+5 type Tower @ 30.579 M³/Tower including De watering , shoring, & curing.

Reinforcement with M.S round bar as per specification for 132KV DC tower including cost of material.

A) De-stringing of 3x1.04 Km ACSR panther conductor between loc. No. 31DC+0 & 35DB+0 safely and making role of the conductor and then carrying them safely to store and stacking properly.

B) De-stringing of Earth wire 1.04 Km between loc. No. 31DC+0 & 35DB+0 safety and making role of the earth wire and then carrying them safety to store and stacking properly.

Dismantling of 02 No. C+0 type tower at loc. No. 32DC+0 & 33DC+0 and 1No A+0 type tower at location No. 34 by way of breaking tack welding and safely removing lattices structure and carrying the dismantled tower part from site to UPPTCL store including scrap nut and bolt & stacking properly.

Erection of 02 Nos. C+15 & 01 No. B+5 type tower & their extension where ever required including all work above ground on pre casted foundation

Tack welding of all the bots to the height of one section of the lowers are 5 meters from ground level whichever is higher with 3 tacks at 1200 separation of minimum 10mm thickness with 10/12 mm electrode and application of zinc rich alluminium paints on the affected surface including cost of all materials.

Laying, stringing, tensioning, clamping, jointing, etc. of ACSR Panther conductor 3*1.04 Km including hosting of insulators, fitting of all necessary hardware and accessories.

Laying, stringing, tensioning, clamping, jointing, etc. of earth wire 7/10 SWG.

Shifting and loading and carriage of pipe earthing materials from stacking place to working site at village Shungulpur near Chaubeypur bypass.

Grounding work including earth work etc. for Pipe earthing/ grounding including cast of choke and salt.

ANNEXURE II-SUPPLY

TOWER ACCESSORIES

Number Plate

Danger Plate

Phase Plate

Bird guard

Earthing Set

CONDUCTOR ACCESSORIES

Vibration Damper for ACSR Panther

M.S Joint suitable for ACSR Panther

Repaire sleeve for ACSR Panther

P.A Rod suitable for ACSR Panther

GROUND ACCESSORIES

Tension clamp suitable for 7/10SWG G.S earth wire

M.S Joint suitable for 7/10SWG G.S earth wire

Vibration damper suitable for 7/10SWG G.S earth wire

Copper wound

HARDWARE FITTINGS

Single tension fitting complete in all respect for ACSR Panther

Double tension fitting complete in all respect for ACSR Panther

120KN Porceline type Disc Insulator

M/S SHEKHAR ENGINEERING WORKS