Annual raising of ornamental plants in various nurseries under Horticulture Sub Division Solan (SH Minor repairs of stores in Nagali Nursery)

Amount

Providing and laying cement concrete 1:6:12 [ One cement isto six sand isto twelvegraded hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work in foundation and plinth, as per H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges including carriage of material and as per the direction of Engineer-in-charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete : 600x600mm including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even andsmooth. Cement Mortar 1:6 (1Cement:6 Sand) including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Providing and fixing 35mm thick battened and framed door shutters including bright finished or and black enamelled iron hinges with necessary screws. Teak Wood including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured) including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately); 35 mm thick shutters including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Providing 40x3mm (forty into three milimeters) flat iron hold fast 40cm.(forty centimeters) Long including fixing to frame with 10mm (ten milimeters) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. (thirty into ten into fifteen centimeters) 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm (twenty milimeters) nominal size) as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges including carriage of material and as per the direction of Engineer-in-charge.

Providing and fixing aluminium handles with necessary screws etc. complete: 125 mm Complete as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges including carriage of material and as per the direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc complete: including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete :.300x16mm.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges including carriage of material and as per the direction of Engineer-in-charge.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With white enamel paint as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges including carriage of material and as per the direction of Engineer-in-charge.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :- Readymixed primer including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with:-- Paint other than white including carriage of material within all leads and lifts and as per the direction of Engineer-in-charge.

ankush thakur

Vikram Thakur