Providing Ordinary Repair Works to Office Complex at Ellis Nagar, Madurai

Providing precast slab of 50mm thick finishing with two sides for cupboard,sunshade, ward-robes, shelves, side slabs of boxing around windows, kitchen platform slabs, sink and other similar works including finishing and fixing in position complying with relevant Standard specifications etc., complete in the following floors (Measurement will be taken including bearing also) as directed by the departmental officers

Painting the old walls inside of the building with two coats of approved interior emulsion paint cost of brushes,cement paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use).

Cement concrete 1:5:10 (One of cement, five of M sand and ten of hard broken stone jelly) for foundation and flooring using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Providing and making fixing in Position of desk made using 17mm thick pre laminated MDF board supported withcable ends all edge to be finished with PVC edge banding tape complete trimed, including one pedestal unit having 1 nos drawer unit and 1 shutter with lock facility, cost include all necessary hardware etc., complete in all respects complying with relevant standard specifi- cations and as directed by the Departmental officers

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish prelaminated board of Aluminium partition of size 2.700 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Supplying, fabricating and fixing in position of Aluminium window/ Ventilator anodized not less than 15 microns confirming to Standard specification made with extruded Aluminium “H” section size 38.5x33x3mm for outer frame. Z section of size 38.5x33x3mm for shutter and intermediate sections of size 59x33x3mm and aluminium clip of size 17.3x17x0.90 mm with MS powder coated stiffner of size 12mm x 3mm for fixing Glass panels with necessary accessories such as Aluminium handles of size 101.6x2.4x3.18mm, Aluminium butterfly hinges of 3”, Aluminium window stay & Pegs of 10”, aluminium hold fast 6”(4mm thick) with suitable Aluminium/ Stainless steel screws and rubber beedings including supplying and fixing of 3mm thick Glass panels and including cost of all materials, labours, power consumption required for fabrication, drilling holes for fixing the aluminium hold fast etc., complete and make the wall in original shape after fixing and as directed by the departmental officers and as per drawings enclosed ( materials should be got approved by Executive Engineer before use)

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like Elbow, Tee reducers, Plug , union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradiant and alignment and redoing the chipped of masonry etc., complying with relevant standard specifications & as directed by the departmental officers. (above G.L)

32mm dia ASTM-D schedule 40 threaded Pvc pipe with necessary PVC/GI specials

20mm dia ASTM-D schedule 40 threaded Pvc pipe with necessary PVC/GI specials

Supply and fixing of SS Heavy Duty Long Body Tap 15mm etc., complete in all respects complying with relevant standard specifi- cations and as directed by the Departmental officers

Supply and fixing of 48" ceiling fan 5 star rated (without regulator) etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.

Supply and fixing of 24W LED 4000K 2 x 2 square type recessed fitting with LED etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.

Servicing of existing 2-Ton Air Conditioner including supply, replacement and installation of new compatible compressor, removal of defective compressor, vacuuming and refrigerant gas charging (R22 / R410A / R32 as applicable), leakage testing with nitrogen, replacement of drier/filter if required, chemical cleaning of condenser and evaporator coils, cleaning of blower and drain system, checking and tightening of all electrical connections, insulation repair, testing, trial run and commissioning to ensure proper cooling performance, voltage and current, including all labour charges, tools, consumables, transportation, loading and unloading, handling of materials, and completion of work in all respects., all complete (The rate includes deduction of scraps and excluding of GST) all complete complying with relevant standard specifications and as directed by the departmental officers.

Servicing the 75KV Generator by Changing Engine Oil 10 Liter, Changing Oil & Fuel Filter - 2 Nos, Changing the Coolant Oil, Changing Air Filter & including Labour Charges etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.

Labour charges for cleaning the Sump such as removing of silt, algae, dead insects impurities, deposited salt at the bottom of sump etc., all including hire charges for rope, bucket, motor for pumping, conveyance, cost of bleaching powder labour charges for washing, cleaning etc. all complete as directed by the departmental officers.

Sub Total

Please Enable Macros to View BoQ information