Providing Special repair to EI in Kothi No. 2 FF 4 3G.F Cottage No. 12-8 Brokhurst Type 6 set No. 12-19-9-8-18.2. Type 5 set No. 18.17.22.9 type 4 set No.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in PVC casing & capping as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated isheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 A socket ou tletand 15/16 A piano type switch, connection, painting etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Providing and installation of following type of Decorative LED bulb with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Jaguar, or any other approved by Engineer-in-Charge.

Providing and installation of following type of recess mounting round type LED Downlight with polycarbonate housing ,anti glare polycarbonate diffuser,surge protection 2.5 KV luminaire efficacy > 85lm/Watt with minimum 25000 burning hours,THD<15% in white finish and seprated energy efficient constant current, non-integral, electronic driver;relevent LM 79/80 complaince fromUN/NABL Lab suitable for input voltage: AC 140-270 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make

Round LED Down Light 9/10W Recess

S/E of LED Downlighter round type surface with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

Wattage of LED fittings- As per following parameters

Total lumens of the LED fittings- as per individual fittings mention below

Body of fittings-CRCA steel sheet with opal acrylic diffuser/ Extruded al. Housing CRCA front frame opal diffuser/CRCA power coated housing with high efficiency translucent diffuser.

Operating voltage-150 V to 265 V, AC supply or better.

Input frequency-50 Hz + 1 Hz

Power factor-Minimum 0.95

Luminaire efficacy->100 lm/w

Color rendering index-CRI shall be 80 (minimum)

Working/ operating temperature-0 to + 45c or better

Color temperature-6000K to 6500K

Electronic Driver

Drive current (LED)-As per OEM.

Operating voltage-150 V to 265 V AC supply or better

Type of driver-Constant current output driver

THD-Less than 10%

Surge Protection-2.5 KV minimum

Efficiency Driver->85%

Protection-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver-2 years against manufacturing defect.

Fixture-Should comply with LM 79 test from NABL/UL lab.

LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED-50000 burning hours at 70% lumen maintenance

Lumen output of the fitting/ wattage

10W/1000 lumens

Led downlight 6 watt

Led downlight 15 watt

Led downlight 18 watt

Providing and installation of following type of LED flood lights suitable for rough services with aluminium die cast housing in white/warm white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; having input voltage: AC 220-240 V, 50/60Hz, and suitable for highlighting architectural features or area lighting complete with all accessories, connections, testing etc. as required: of Approved Make

Providing and fixing 25 W LED Strip light (5W/mtr)with colour temperature 3000K and lumens output of 72 lm/W suitable for input voltage 220-240V,50-60HZ frequency range, energy efficient constant current electronic driver, complete with all accessories, connections, testing etc. as required: . Make: Wipro, Twinkle, Syska, Bajaj, C&S, Panasonic or as approved by Engineer-in-chargeProviding and fixing Led Rope light 3000 K of goldmedal or any other approved make.

Providing and fixing Led Rope light driver of 12V of goldmedal or any other approved make

Providing and installation of wall mounting fan of following sizes i/e hang the same in position on the wall connection testing and commissioning etc as required with best satisfaction of Emgineer-In-Chief make Havells, Bajaj, crompton greaves, usha, kahitan etc

Wall mounting fan 400mm sweep

Providing and installation of following type of LED Gate light suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories if required including connections, testing and commissioning etc. as required. Make: Philips, GOLDMEDAL, JAQUARor any other approved by Engineer-in-Charge

Providing and installation exhaust fan of following sizes in the existing opening,Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type

230mm sweep

300mm sweep

Installation of ventilatinmg /exhaust fan in the existing opening, including making good BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor the damage, connection, testing, commissioning etc. as required.Supply & Erection of Ventilating Fan ) following size complete with motor,, with minimum power consumption, rigid frame with rubber mounting for silent operation, in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.

150 mm sweep

200mm sweep

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 6 sq. mm (twin core)

Armoured cable 10 sq. mm (twin core)

(Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as requiredSS Enclosure) 100 amp bus bar 24 " Details of cost for one each

Providing and fixing following size of backalite sheets as below:-

Backlite sheet 7*4

Backlite sheet 8*5

Backlite sheet 9*4

Conditions:-

Rates should be quoted for all heights including all leads and lifts for internal and external works for all floor levels.

Useful materials should be handed over to the Assistant Engineer Electrical Sub Division No.II, Sectt. Shimla, otherwise credit for useful materials will be charged.

Sample of all the material to be used on work shall be got approved from the Engineer-in-charge in advance before actual use on work and any or all of the material which are available as per Indian standard in the market should confirm to bureau of indian standards.

It is certify that the tender is being called on emergentnature in exigency of Public insterest.

Condition:- The Credit for old dismantled material will be recovered from the contractor on L/S basis @ Rs.1800/- Only.