Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 CrAdmitted-Finance 404 ITL TWIN TOWERS PLOT NO B 9 NETAJI SUBHASH PLACE PITAMPURA NEW DELHI | NORTH WEST | DELHI | 110034 | ₹7.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹7.2 Cr+₹5.0 L (0.70%)Admitted-Finance | ₹7.2 Cr+₹5.0 L (0.70%) | L2 | Admitted-Finance |
| 3 | L3₹8.6 Cr+₹1.4 Cr (19.5%)Admitted-Finance A 701 HINDON APPARTMENT 25 VASUNDHARA ENCLAVE DELHI EAST DELHI DELHI 110096 | EAST DELHI | DELHI | 110096 | ₹8.6 Cr+₹1.4 Cr (19.5%) | L3 | Admitted-Finance |
| 4 | L4₹8.6 Cr+₹1.4 Cr (19.5%)Admitted-Finance C O VOLTAS LIMITED SPARE PARTS DEPOT OLD HUTMENT COLONY NCL NIGAHI SINGRAULI M P 486884 | SINGRAULI | SINGRAULI | MADHYA PRADESH | 486884 | ₹8.6 Cr+₹1.4 Cr (19.5%) | L4 | Admitted-Finance |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
| Sl No | Description | Qty | Unit | Green Power International Pvt. Ltd. L3 | Sri Venkateswaraa Engineering L2 | HV AIRCONDITIONING SYSTEMS PVT. LTD. L1 | UNIVERSAL MEP PROJECTS & ENGINEERING SERVICES LIMITED L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE3) Of following capacities.
Capacity 10,000 CMH, St. Pressure 50 Pa | 1 | No | 2,00,000 ₹2,00,000 | 1,05,000 ₹1,05,000 | 45,000 ₹45,000 | 41,889 ₹41,889 Lowest |
| 2.00 | Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE3), ect. Of following capacities. Fans along with motor shall be spark resistant. Capacity 1200 CMH, St. Pressure 50 Pa | 2 | No | 1,50,000 ₹3,00,000 | 79,800 ₹1,59,600 | 8,000 ₹16,000 Lowest | 47,514 ₹95,028 |
| 3.00 | Fine filters: The scope of work includes transportation, handling, installation, testing and commissioning of synthetic non woven Fine filters with 99% efficiency down to 5 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) including 6 mm thick neoprene gasket. | 264 | No | 11,000 ₹29,04,000 | 6,361 ₹16,79,304 | 6,000 ₹15,84,000 Lowest | 6,917 ₹18,26,088 |
| 4.00 | HEPA filters: The scope of work includes design, supply, transportation, handling, installation, testing and commissioning of micro glass fiber HEPA filters with 99.97 % efficiency down to 0.3 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) including 6 mm thick neoprene gasket. | 264 | No | 19,000 ₹50,16,000 | 19,566 ₹51,65,424 | 18,850 ₹49,76,400 Lowest | 19,993 ₹52,78,152 |
| 5.00 | GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 15)
22 Gauge | 1,000 | sqm | 1,700 ₹17,00,000 | 1,450 ₹14,50,000 | 1,430 ₹14,30,000 | 1,399 ₹13,99,000 Lowest |
| 6.00 | GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 15)
20 Gauge | 1,200 | sqm | 2,000 ₹24,00,000 | 1,625 ₹19,50,000 | 1,660 ₹19,92,000 | 1,607 ₹19,28,400 Lowest |
| 7.00 | SS304L duct: Supply, fabrication, erection and testing of exhaust air ducting with AISI SS304L, complying to ASTM A 240 complete with SS reinforcement, pickling & passivation, TIG welding, third party inspection, SS fasteners, etc., as per technical specification and drawings. The duct weld joints shall be 100 % DP tested. Duct welding and construction shall be as per ASME Sec VIII Div 1 and SMACNA standard. (Note: Necessary duct supporting structural material is covered under item no. 15) 5.0 mm thick | 400 | sqm | 26,000 ₹1,04,00,000 | 25,000 ₹1,00,00,000 | 24,350 ₹97,40,000 Lowest | 30,041 ₹1,20,16,400 |
| 8.00 | SS304L duct: Supply, fabrication, erection and testing of exhaust air ducting with AISI SS304L, complying to ASTM A 240 complete with SS reinforcement, pickling & passivation, TIG welding, third party inspection, SS fasteners, etc., as per technical specification and drawings. The duct weld joints shall be 100 % DP tested. Duct welding and construction shall be as per ASME Sec VIII Div 1 and SMACNA standard. (Note: Necessary duct supporting structural material is covered under item no. 15) 3.0 mm thick | 1,820 | sqm | 17,000 ₹3,09,40,000 | 15,180 ₹2,76,27,600 Lowest | 17,000 ₹3,09,40,000 | 19,257 ₹3,50,47,740 |
| 9.00 | Thermal insulation:Supply and installation of closed cell Nitrile rubber (class“O”) thermal insulation of 25mm thick duly laminated with aluminum foil of mat finish on supply air duct. Insulation shall be sticked by applying two coats of cold setting adhesive as per technical specification. | 2,000 | sqm | 1,100 ₹22,00,000 | 800 ₹16,00,000 Lowest | 850 ₹17,00,000 | 1,083 ₹21,66,000 |
| 10.00 | Grilles: Supply and installation of double deflection type supply air grill with 16G extruded aluminium powder coated material, adjustable and locking type aluminium volume control damper. The louvers shall be adjustable in horizontal and vertical positions. Louvers portion shall be removable type for adjusting volume control damper. | 15 | sqm | 17,000 ₹2,55,000 Lowest | 22,900 ₹3,43,500 | 21,000 ₹3,15,000 | 19,642 ₹2,94,630 |
Tender Value
₹9.6 Cr
EMD Value
₹19.2 L
Closing Date
30 Jun 2025, 3:00 pmClosed
Chief Executive, NRB
Office of the Project Director, FRFCF-NRB, Kalpakkam.
Supply, Installation, Testing and Commissioning of Air Conditioning and Ventilation of RUP Plant Exhaust system at FRFCF, Kalpakkam
2025_BARC_859205_1
BARCF/FRFCF/ME/TR-048/2024
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
365 days
FRFCF, KALPAKKAM
Please refer tender document
8 documents required · 8 mandatory
₹0
₹19.2 L
FRFCF, KALPAKKAM
26 Dec 2025
8 May 2025
8 Jul 2025
9 May 2025
30 Jun 2025
30 May 2025
9 May 2025 - 23 May 2025
27 May 2025
Amount
Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE3) Of following capacities. Capacity 10,000 CMH, St. Pressure 50 Pa
Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE3), ect. Of following capacities. Fans along with motor shall be spark resistant. Capacity 1200 CMH, St. Pressure 50 Pa
Fine filters: The scope of work includes transportation, handling, installation, testing and commissioning of synthetic non woven Fine filters with 99% efficiency down to 5 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) including 6 mm thick neoprene gasket.
HEPA filters: The scope of work includes design, supply, transportation, handling, installation, testing and commissioning of micro glass fiber HEPA filters with 99.97 % efficiency down to 0.3 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) including 6 mm thick neoprene gasket.
GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 15) 22 Gauge
GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 15) 20 Gauge
SS304L duct: Supply, fabrication, erection and testing of exhaust air ducting with AISI SS304L, complying to ASTM A 240 complete with SS reinforcement, pickling & passivation, TIG welding, third party inspection, SS fasteners, etc., as per technical specification and drawings. The duct weld joints shall be 100 % DP tested. Duct welding and construction shall be as per ASME Sec VIII Div 1 and SMACNA standard. (Note: Necessary duct supporting structural material is covered under item no. 15) 5.0 mm thick
SS304L duct: Supply, fabrication, erection and testing of exhaust air ducting with AISI SS304L, complying to ASTM A 240 complete with SS reinforcement, pickling & passivation, TIG welding, third party inspection, SS fasteners, etc., as per technical specification and drawings. The duct weld joints shall be 100 % DP tested. Duct welding and construction shall be as per ASME Sec VIII Div 1 and SMACNA standard. (Note: Necessary duct supporting structural material is covered under item no. 15) 3.0 mm thick
Thermal insulation:Supply and installation of closed cell Nitrile rubber (class“O”) thermal insulation of 25mm thick duly laminated with aluminum foil of mat finish on supply air duct. Insulation shall be sticked by applying two coats of cold setting adhesive as per technical specification.
Grilles: Supply and installation of double deflection type supply air grill with 16G extruded aluminium powder coated material, adjustable and locking type aluminium volume control damper. The louvers shall be adjustable in horizontal and vertical positions. Louvers portion shall be removable type for adjusting volume control damper.
Grilles: Supply and installation of double deflection type exhaust air grill with SS 304L material, 1.5 mm thick, adjustable and locking type SS 304L volume controll damper.The louvers shall be adjustable in horizontal and vertical directions. The louvers portion shall be removable type for adjusting volume control damper.
Diffuser: Supply and installation of square shape ceiling diffusers, 16 G thick extruded aluminium powder coated material, along with removable core & anti smudge ring type volume control dampers.
Volume Control damper: Supply and installation of multi opposed blade type manual volume control damper, rectangular/circular shape, 16 G GSS casing & 16 G GSS blades, shaft, bearing etc locking arrangement and OPEN/CLOSE inidcation etc., as per technical specification.
Volume control damper: Supply and installation of multi opposed blade type manual volume control damper, rectangular/circular shape, 3.0 mm thick SS 304L casing & 1.5 mm thick SS 304L blades, SS 304L shaft, bearing etc locking arrangement and OPEN/CLOSE inidcation etc., as per technical specification.
MS Supports: Supply of materials, fabrication and erection of MS structural steel confirming to IS 2062 Gr.B for supporting ducts, plenums, isolation dampers, pipes, equipment supports etc., including one coat of epoxy primer and two coat of epoxy painting. The structural material shall be in the form of angle, channel, beam, plate, pipe, rod, fasteners, clamp etc.
SS304 Supports: Supply of materials, fabrication and erection of SS304 structural steel in the form of angle, channel, beam, plate, 3mm/6mm flats/sheet, rod, fasteners, clamp etc as per ASTMA240 with original linkable mill test certificate. 3mm/6mm flats/sheets shall be provided whereever CS to SS contact is there.
Supply and installation of Heavy Duty Anchor or equivalent for providing pipe supports where ever embedded plates are not available / provided. The anchor shall be galvanized steel HSL4-G M12 x 141 mm
Opening and enclosing of brick wall: Opening of brick wall of average thickness of 150 mm to 300mm for routing of pipe & ducts and enclosing the same with proper PVC sleeves, providing brick filling and cement mixture at various locations.
Opening and enclosing of concrete wall: Opening of concrete wall of average thickness of 150 mm to 300mm for routing of pipe & ducts and enclosing the same with proper PVC sleeves, providing brick filling and cement mixture at various locations.
Differential Pressure gauge: Supply and installation of 6" dial type differential pressure gauge-Magnehelic type complete with SS tubings, compression fittings, mounting brackets etc. Across Pre-filter & fine filter bank, range 0- 250 Pa
Differential Pressure gauge: Supply and installation of 6" dial type differential pressure gauge-Magnehelic type complete with SS tubings, compression fittings, mounting brackets etc. Across HEPA filter bank, range 0- 1000 Pa
Duct static pressure sensor & pressure transmitter with controller: Supply and installation of duct static pressure sensor and transmitter with 4-20 mA output and controller with relay output to be mounted on the supply air plenum for controlling and regulating the air flow through fan VFD speed. Exhaust air fan fillter suction side plenum static pressure Range- (-)500 - 0 Pa
Supply, installation and commissioning of differential pressure switch (Non-indicating type). Range- 0 - 250 Pa
Supply, installation and commissioning of differential pressure switch (Non-indicating type). Range- 0 - 1000 Pa
Supply, installation and commissioning of pressure switch. Range- (-)400 - 0 Pa
Instrument cable - Supply and installation of stranded annealed tinned copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable 1 Pair x 0.75 sq mm signal Cable (Individual & overall Shielded, armoured)
Supply, installation and commissioning of signal cable including Double compression (Nickel Plated Brass) Cable Glands at both ends 1P x 0.75 Sq mm (individual pair shielded)
Supply, installation and commissioning of signal cable including Double compression (Nickel Plated Brass) Cable Glands at both ends 6P x 0.75 Sq mm (individual pair shielded & overall shielded)
Supply, installation and commissioning of control cables 2C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables 4C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables 7C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables 17C x 1.0 Sq mm (overall shielded)
Instrument erection accessories 1” Rigid Conduit (mild steel; hot dipped galvanised) including conduit fittings like coupling, elbows, clamps etc.
Instrument erection accessories 1” Flexible Conduit (mild steel; hot dipped galvanised) including conduit fittings like coupling, elbows, clamps etc.
Cable tray: Supply and erection of Perforated 2.5 mm thick GI cable tray with cover (minimum 70 µ coating thickness) including all accessories and MS mounting support. Size 100 mm x 50 mm
Cable tray: Supply and erection of Perforated 2.5 mm thick GI cable tray with cover (minimum 70 µ coating thickness) including all accessories and MS mounting support. Size 150 mm x 50 mm
Supply, installation and commissioning of junction boxes with required accessories (Material: 2.5 mm thick cast aluminium, IP -55, provided with 6 nos SS cable glands per JB) 50 T
Supply, installation and commissioning of junction boxes with required accessories (Material: 2.5 mm thick cast aluminium, IP -55, provided with 6 nos SS cable glands per JB) 100 T
Supply, installation and commissioning of instrument air - 4 TAPS
Impulse Tubes: 6 mm OD X 1.25 mm thick SS 316 annealed, cold drawn seamless tubes, 600# class
6 mm SS ferrule type male connector
6 mm SS ferrule type Female connector
6 mm SS ferrule type Union
6 mm 3 way SS Gauge Cock
5 valve SS manifold
SS Compression fittings for all gauges and sensors
Sri Venkateswaraa Engineering (BID ID -3233697)
Green Power International Pvt. Ltd. (BID ID -3233183)
UNIVERSAL MEP PROJECTS & ENGINEERING SERVICES LIMITED (BID ID -3240721)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ_903303.xls
BOQ • 0.31 MB
169973962.html
Tender Documents • 0.06 MB
170082185.pdf
Tender Documents • 0.54 MB
173359101.pdf
Tender Documents • 0.32 MB
Drawings.rar
Tender Documents • 5.50 MB
GCC2014.pdf
Tender Documents • 4.88 MB
Tenderdocument048.pdf
Tender Documents • 2.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .