PROVISION OF PERMANENT DSC ACCOMODATION AND SECURITY INFRASTRUCTURE AT INS BAAZ CAMPBELL BAY

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XII are prepriced by MES under Ser No. 2.00 to 13.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES

Lumpsum price worked out by the tenderer for "Excavation and Earth work including site clearance and Land Development" as listed in Schedule 'A' Part-II

Lumpsum price worked out by the tenderer for "Internal Water Supply" as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for "RCC Retaining Wall" as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for "Roads/Paths/Culvert" as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for "External Water Supply" as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for "External Electrification " as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for "Sewage Disposal " as listed in Schedule ‘A’ Part-IX

Lumpsum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for "Compound Wall/Fencing" as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for "Demolition/Dismantling" as listed in Schedule ‘A’ Part-XII

Subtotal

NOTE: Schedule ‘A’ Part - XIII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

SCHEDULE `A' PART - XIII (MISC ITEMS) (INTERNAL ELECTRIFICATION) Supply & Fix Double pole and earth enclosure with a three pin and earth plug with socket 16A capacity including one double pole RCCB 16A capacity complete all as specified and as directed.

Supply and Fixing ceiling fan 5 star rated ISI marked suitable for working of AC 230V,50Hz 1200mm sweep with down rod, canopy without fan regulator suitable for ceiling fan complete and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 0.75 Sq.mm from ceiling rose to connector of ceiling fan complete all as directed and as specified. Makes:- Bajaj/Havells/Crompton Greaves

Supply and Fixing 5 Star rated / ISI marked Exhaust fan heavy duty type with double ball bearing, continuous rated along with GI louvers for protection when not in use, silent operation, rust proof body and blades, MS grate for rodent protection with fixing arrangements of size 300mm sweep, 1400 rpm and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 0.75 Sq.mm from ceiling rose to connector of exhaust fan complete all as specified and as directed. Makes:- Usha/CG/Bajaj

Supply and Fixing 5 Star rated / ISI marked Exhaust fan heavy duty type with double ball bearing, continuous rated along with GI louvers for protection when not in use, silent operation, rust proof body and blades, MS grate for rodent protection with fixing arrangements of size 600mm sweep, 1400 rpm and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 0.75 Sq.mm from ceiling rose to connector of exhaust fan complete all as specified and as directed. Makes:- Usha/CG/Bajaj

Supply and Fixing LED type tube light fittings 4 feet long 1x20 W 230V ,decorative ultra alim squar profile liner LED lighting fixture with extruded polycarbonate envoirnmental friendly, energy efficient tube light life time 40,000 burning Hrs, lumen output 2000lm, color temp-6000K,Surge protection of 2kV with voltage protection 160-360V, power factor >0.9 complete & prewired for LED tube complete fixed to wall / Ceiling by suitable downrods, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified and as directed. Make: Philips Cat No-BN021C LED 20S PSU CW GR S2 or Equivalent in Wipro/ CROMPTON 03years Guarranty as per manufacturer instructions or lifetime 40,000 burning Hrs which ever is earlier as applicable.

Supply and Fixing 10 Watt LED fittings surge protection of 2 KV with wide voltage protection 160-360 Volt, lumen output 900lm complete all as specified and as directed. Make:- Philips Cat No-BN010C LED 20S PSU CW GR S1 or equivalent in Wipro/Crompton

Supply and Fixing building street light 30 Watt capacity LED including electronic driver IP 65 protection ,fixing with suitable size of brakets 1.2 mtr long bend to shape including clamp nut and bolt ,connected from celing rose or existing point complete all as specified and as directed. Make: Philips Cat No-BRP046LED30 CW MR S1 PSU GR or equivalent in WIPRO/CROMPTON

Supply and fix Sheet steel factory made double door, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door type SPN 6 Way 220 Volt, MCB as a Incomer complete all as directed. Make : L&T / Legrand / Schneider / ABB

Supply and fix MCB SP 230 volts 6-32 Amps 10KA 'C' curve complete all as specifed and as directed. Make: L&T /Legrand /Indo Asian/ ABB/ Siemens/ Schneider

Supply and fix MCB SPN 230 volts 6-32 Amps 10KA 'C' curve complete all as specifed and as directed. Make: L&T /Legrand /Indo Asian/ ABB/ Siemens/ Schneider

Supply and fix MCCB 4 Pole 415 volts 32-100 Amps 16KA capacity complete all as specifed and as directed. Make: L&T /Legrand /Indo Asian/ ABB/ Siemens/ Schneider

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by with 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 mtr, complete all as shown in electrical plate No 3 of schedule Part-I.

Notes: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit, RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

Supply and Fixing bulk head fitting LED light fitting flameproof type FLLP -WP of 1X18W with all accessories prewired and including connecting up with twin core twisted flexible cable copper conductor with suitable size complete all as specified and as directed. Note : Fittings to be fixed at higher height than normal accesible height.

Supply and Fixing TV socket / Telephone socket complete all as specified and directed

Material and Labour for rigid non metallic, PVC conduit of size 20mm dia inclusive of boxes ( junction / terminal), all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts saddles, pipe hooks etc for TV sockets / Telephone sockets/ CCTV complete all as directed.

(A). Alternator :- Standard design alternator rated at 100 kVA net output at site after considering de-rating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self excited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of +/- 1% at rated voltage from no load to full load. The alternator shall be conforming to BS 2613/5000 and shall be imposition to generate supply with frequency regulation with in + 1% tolerance. The alternator will be suitable for tropical climate and shall generally conform to BS - 2613/5000/ IS – 4722 i) Insualation class - 'H‘ ii) Temparature rise Class - 'H‘ iii) Excitation : Self Excited iv) Regulation performance: The voltage is kept constant with +/- 1%, manual voltage adjustment within +/- 5% v) Frequency regulation +/- 1% (B) Diesel Engine: - Adequate capacity of Diesel engine as accosted by the accepting officer basing on manufacturers technical details water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- i)Fly wheel with housing ii) Cooling system :- Moulded radiator with fan & belts iii) Cooling Water pump : - Centrifugal type belt driven iv) Exhaust System :- Exhaust System complete with exhaust piping of 150mm dia with MS pipe light grade upto & outside and 1meter away from the enclosure, covered with asbestos rope and aluminium foil of 28 SWG complete with in the enclosure for safe exhaust without transforming vibration to the wall of the enclosure. Exhaust gas turbo charger type. Exhaust manifold Silencer : Residual type Bellows v) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governor for 1% speed /frequency regulation, Fuel filters, Fuel hoses. vi) Lub oil System : Lubricating oil filter Lubricating oil pump vii) Air Intake System : Air intake Manifold Air cleaner dry type

c) Sound Insulation :- 100 mm thick rock wool (64kg/Cum) vi) The accoustic should be composite in construction and fully assembled integral unit vii) The batteries should be placed inside the enclosure beside the DG Set on a suitable insulated plat form viii) The fuel tank is to be located in Sub Station Building and cost of the fuel lines is deemed to be included in the offer. ix) The DG Set should be provided with external Emergency stop push button x) The enclosure should be suitably illuminated by CFL/FTL Lamp fittings. xi) The noise level should be 75 dba at 1m under free field conditions. xii) The acoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Gen set Green. The base frame should be painted with epoxy based black shade Make: CUMMINS/ASHOK LEYLAND/Greaves India Ltd/Kirloskar/Caterpillar/Ruston

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 32x6mm(upto 7.5m in length from earth plate) connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

Supply and fixing galvanised iron strip 32x6mm buried in ground/fixed to walls complete all as specified and as directed.

EXTERNAL WATER SUPPLY Material & Labour for Construction of masonry valve chamber of size 600x600x750mm internal size, 100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15mm thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth without using extra cement , 3.15mm thick MS sheet cover including 50x50x6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25x6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50m complete all as specified and shown on drawing No.TD-92 sheet 1/1 and as directed.

EXTERNAL ELECTRIC SUPPLY Supply and Fix Symmetrical beam non-integral LED flood light made up of pressure die cast aluminum housing with toughened glass and high power LEDs of 200W and secondary lenses with IP66 protection complete with mounted the angle iron and moveable to 180 Degree front side all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size 1.5 Sqmm complete all as specified and as directed. Make:- Crompton Cat Part No.LFLN-200-CDL/60-M or its equivalent in Philips/Bajaj

Material & Labour for supply and errect in true vertical position steel tubular swaged pole complete with base plate 300x300x6mm thick, finial taper plug, bolts, nuts and washers etc. all as specified in IS-2713(Part-III) 1980 revised, painted inside with black bituminous paint and exterior portion of pole with one coat of red oxide and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete all as specified of type 410 SP-31 (9 meters long) and directed by EIC.

Supply and fixing Light Emitting Diode street light luminiare, compressing pressure die cast housing for better aesthetics and thermal management, Aerodynamicallly shaped, high grade powder coating and fitted with toughened glass with high power LEDs of 60 Watt and pipe mounting arrangement for end mounitng on 50mm dia GI pipe, GI pipe bracket 50mm dia, light grade bent to shape as directed, 1.2m long with two sets of clamp made out of flat iron 50x6mm,bolts,nuts and washers and two coats of aluminium paint over a coat of primer connecting electrically with PVC multistranded copper cable of suitable size complete all as specified and as directed. Make:- Crompton Greaves Cat Part No.LSTP-60-CDL or equivalent in Philips/Havells/Wipro.

Supply and fixing FRP junction box of size 230x170x105mm for loop-in-loop out connections of street lights including one four pole connector and one MCB 240V SP 2.5A including fixing on poles complete all as specified and as directed.

Material and Labour for HDPE double wall corrugated pipe of size 145mm outer dia and 126mm inner dia conforming to IS:14930 Part-II including necessary pipe fittings such as couplers,end caps,bends etc laid in trenches/on poles for 95 Sqmm and 120Sqmm 3.5 Core cable protection complete all as specified and as directed.

Material and Labour for HDPE double wall corrugated pipe of size 120mm outer dia and 103mm inner dia conforming to IS:14930 Part-II including necessary pipe fittings such as couplers,end caps,bends etc laid in trenches/on poles for 50 Sqmm and 70 Sqmm 3.5 Core cable protection complete all as specified and as directed.

Material and Labour for HDPE double wall corrugated pipe of size 77mm outer dia and 63mm inner dia conforming to IS:14930 Part-II including necessary pipe fittings such as couplers,end caps,bends etc laid in trenches/on poles for 25 Sqmm 4 Core cable protection complete all as specified and as directed.

Material and Labour for HDPE double wall corrugated pipe of size 50mm outer dia and 38mm inner dia conforming to IS:14930 Part-II including necessary pipe fittings such as couplers,end caps,bends etc laid in trenches/on poles for 16 Sqmm and 10 Sqmm 2 Core cable protection complete all as specified and as directed.

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 25x4mm(upto 7.5m in length from earth plate) connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

COMPOUND WALL/FENCING Supply and fixing GI concertina coil with clips and barbs complete, dia of coil should be 600mm all as specified and as directed.

Subtotal

M/S RAJBUILDERS

Kailash Engineering Company

BHARAT MULTITECH INDUSTRIES PVT LTD

laasya constructions

Sri Avantika Contractors (I) Limited