temporary shifting of electrical utilities from RD 0.5 to RD 1 90 feet Road Soura using HT AB Cable

Supply, installation, testing and commissioning of:

9 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard (poles available at site)

MS Channel iron(ISLC 75 designation) 100x50x50x6 mm 9' long (2 No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paintas per REC Standard .

MS Channel iron(ISLC 75 designation) 75x40x40x6 mm 9' long (8No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paintas per REC Standard .

MS Channel iron(ISLC 75 designation) 75x40x40x6 mm 6' long (2 No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paintas per REC Standard .

MS Angle iron braces (ISA 5050 designation) 50x50x6mm 6' long (4 No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard

Providing of Chemical Earthing of Sub-Station for neutral earthing 2 mtr long 50mm dia GI to copper with additional 1 length GI pipe 38mm connected with chemical earthing and with extension of GI strip 25*3mm upto all equipments.Earthing has been laid through insulators to avoid with the existing structure for LA.

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

GI Strip for Earthing 25x5mm as per REC Standard

185 mm² PVC single core LT cable connforming to IS 1554 (part -I) 1988 for incoming and outgoing circuits to be connected with LT Network including thimbling with 185 mm sq Al lugs

Bi matellic Clamps19mm².

11KV 400 AMP Gang Operated switch gear

Drop-out set (Horn-gap type) as per REC standard F6

11KV Lighting Arrester Set (Station type) as per REC standard fonforming to IS 3070 part -III and as per REC standard

shifting of 250kVA/100 KVA/ 16 KVA transformer 11/0.433kV, 3-phase Distribution Transformers and with LV Cable Box having detachable Aluminium Gland plate approved by the Department including earthing of Transformer along with fixing of flat iron strip to be fixed on earthling insulating boots of Sub Stations on two poles structure as per REC Standard F1,F2, F3 F4 &F10 ( Transformer's Available at site)

Fuse set

11KV pinwith insulators Brown glazed porcelain insulator confirming to IS-731/1971 Amendments 1 to 5 type B with 320mm minimum creepage distance and with lead/Zinc thimbles suitable for use with G.I forged pin having small steel heads as per IS-4l86 (P.I) 1993 and IS-2486 (P.II)1989 and revision with latest amendments if any as per REC Standard C-1

Danger plate as per REC Standard

Earthing Rods as per REC Standard (J-1) (Spiral Type)

Earthing insulating boots

Providing, Erection, testing & commissioning of MS Angle iron for Transformer Belt (ISA 5050 designation) 50x50x6mm 10' long duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard

Anticlimbing Device as per REC Standard

Sign Board

11 KV 50 mm ² AB cable

11 KV 50 mm ² AB cable kit heat shrinkable outdoor type

Suspension/ tension clamps

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

8 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard

LT Shackles Insulators brown glazed 90X75MM along with mukki clamps clamp

Pole clamps fabricated out of MS channel

Cement bottoming of pole structures as per REC

Painting of poles/ structure with 2 coats of Al. & red oxide paint and painted of orange colouras per REC Standard

Dismantling of 9 mts/8 mts ST/PCC existing poles and carriage to divisional store

Dismantling of conductor and carriage to divisional store

Dismantling of iron/hardware and other allied material

Dismantling of sub stations along with allied material

Relaying of dismantled conduction for stabilization of LT network

I.T ELECTRIC SUPPLIER