Provision of Data logger Console and upgradation of S&T/Cnl/SDAH for proper Analytics for Asset maintenance and management over Sealdah division.

A-NON-SCHEDULE/SOR ITEM vide SL. NO. 1 to 26 GIVEN IN SCHEDULE

BEEN SHOWN IN ITEM BREAKUP SEPARATELY.

NON-SCHEDULE/SOR ITEM vide SL. NO. 1 to 26 GIVEN IN SCHEDULE OF WORK. GST HAS BEEN

SHOWN IN ITEM BREAKUP SEPARATELY.

S No. Item Description of Item Unit Qty Rate Amount

SEALDAH DIVISION-S AND T/EASTERN RLY

1 1 "Design and Development of suitable Numbers 106.00 25847.46 2739830.76

logics, Implementation and validation of

Dashboard to display the Real time status

for all the stations, Auto Huts, LC

gates(WSL), IBH, OFC rooms in Sealdah

division at a glance and Design and

development of a dash board to display real

time status of Axle Counters of block

sections for all stations and locations at

data logger control room/sealdah division

and provision of audio alarms for all critical

inputs taken from all Dataloggers and RTUs

to S&T control room at Sealdah division: (i)

Open/Close status of Relay room door (ii)

All IPS inputs (DC-DC converters, SMRs,

Inverters, other redundant IPS modules)

including battery status (iii) All inputs of

power supply from different Telecom

equipments present in OFC room , battery

room,etc, required for proper monitoring of

power supply arrangements and current

status (iv) Status of dual track detection

systems (failure of any one system) for

systems of all combination like dual

MSDAC, SSDAC, HASSDAC, DC track with

SSDAC, etc. (v) Status of Track Feed

Battery Charger (TFBC) (vi) Status of Earth

Leakage Detectors (ELD) (vii) Monitoring of

intermittent failures of boom locking

arrangements for all LC gates (WSL & OSL)

(viii) Status of Media fail of UFSBI and BPAC

for systems with Dual Media provision

(Quad/OFC) (ix) Working of fire alarms (x)

All RDSO approved fault logics should be

shown in the dashboard screen as per the

Division requirement. (xi) Installation,

Testing and commissioning of work

station,Application PC and client PC. Note:

(i) Any other logic required for monitoring

of signalling and telecom gears should also

be provided as per demand of S&T Control.

All the logics for monitoring purpose should

be approved by Sr.DSTE/SDAH through

SSE/Sig/CNL and SSE/Tele/CNL (ii) 'No' in

the unit column indicates 'Per station'"

2 2 "Design, development and Implementation Numbers 228.00 10593.22 2415254.16

of dashboard to display the realtime Status

of LC gate through RTU including (i) IPS

inputs for battery backup or failure of

modules or other sources of power supply

at the LC gates (ii) Relay Room door (iii)

Development of logics to generate audio

and visual alarms in case of IPS or Fire

Alarm failures for all stations and locations

at data logger control room/sealdah

division. (iv) All the indications of RDSO

Power panel of LC Gate should be available

in the dash board. Note: (i) Any other logic

required for monitoring of signalling and

telecom gears should also be provided as

per demand of S&T Control. All the logics

for monitoring purpose should be approved

by Sr.DSTE/SDAH through SSE/Sig/CNL and

SSE/Tele/CNL (ii) 'No' in the unit column

indicates 'Per LC gate'"

SEALDAH DIVISION-S AND T/EASTERN RLY

3 3 "Carrying out relay alteration to the existing Per Relay 10000.00 228.81 2288100.00

relay wiring at relay rack/location box as

per the approved circuit diagram and the

addition of all analog inputs present at site

to the dataloggers/ RTUs . These works

include: (i) Inclusion/ deletion of all Vital

relays and analog inputs as per site

requirements for all stations, LC gates, Auto

huts, IBH, OFC rooms with correct

nomenclature of all relays and analog

inputs. (ii) Carrying out wiring and

validation of potential free contact of OFC

Charger over with Datalogger.(iii)

Configuration & Validation of all relay and

analog inputs and also ensuring proper

working of all in-operative relays and

analog inputs. (iv) The releasing of existing

unused wires and wiring the relays using

16/0.2 mm copper wire as per RDSO Spec.

Wire to be procured from RDSO's approved

source. Inspection : RITES Note: - i)Wire to

be procured from RDSO's approved source

only. All required material like wire,

soldering material, paint etc. To be

supplied by the contractor for execution of

4 4 "Supply of Client PC (Multi Monitor Display Numbers 2.00 296610.17 593220.34

System) Capable for driving 04 Nos of LED

TV Displays of 55" or above.• Processor :

Intel XEON 6 Core CPU 2.1 GHz or higher.•

RAM : 32 GB DDR4 • Storage : 1 TB SSD•

Graphic Card : 4 GB (4 Mini-DP ports per

card) • Power Supply : 800W - 90% efficient

• Keyboard : USB Keyboard • Mouse : USB

Optical Mouse • Speakers : Desktop

speakers 1 set • Operating System :

Windows 11 Pro or latest with Licensed

version •Monitor: 60.5 cm (23.8 inch)

diagonal FHD display or better • Antivirus :

Kaspersky/ Quick heal or better with 01

years subscription minimum.• UPS : 1 KVA

offline UPS with 30 minutes of backup for

the CPU.•02 Nos 128GB Pen Drive.

Warranty : 3 Years. Make- Dell/HP or better.

Inspection : RITES"

5 5 "Supply of STP CAT-6 data cable as per Metre 7000.00 38.39 268730.00

EIA/TIA- 568-B.2-1 or latest. Make: D-Link/

Molex/Comscope or better.. Inspection:

6 6 Laying of Power Cable/STP/UTP CAT- Metre 7000.00 16.10 112700.00

6/Switch Board Cable/OFC/Earth Cable etc.

through flexible PVC Conduit Pipe/ GI

Pipe/HDPE Pipe (where necessary) as per

direction of the Rly. Representative . Note-

This also includes Laying of STP/UTP CAT-6

from Relay room/OFC to Data logger

equipment Room to connect free potential

contact of OFC charger.

7 7 "Supply of conduit pipe size 25mm dia 2 Metre 7000.00 24.80 173600.00

mm thicknessand 3 mtrs standard length

with ISI 9537(Part 3):or latest. Make:

Supreme/Polycab/Jindal/Garware or better.

Inspection : Consignee."

8 8 Fixing of PVC conduit pipe on wall, bridges, Metre 7000.00 5.27 36890.00

platformshed complete with 'U' clamps and

necessary fixture screws etc. as per route

given by site engineer of Railways. Note-

PVC pipe supplied by railway.

SEALDAH DIVISION-S AND T/EASTERN RLY

9 9 "Supply, Installation, wiring, testing & Set 5.00 52118.64 260593.20

commissioning of 55"" LED based VDU

(Professional Monitor) with 4K resolution,

suitable for 24X7 application for Control

Terminal of E.I. System as per RDSO spec.

No. RDSO/SPN/192/ 2019 Ver. 2 or latest

with Technical specification : Display

Technology- In plane Switching(IPS) ,

Display Type- Anti-Glare LCD with direct lit

LED, Display Panel Size( Diagonal)-55"",

Minimum Display resolution (Horizontal X

Vertical ) - 4K UHD-3840X2160 , Life time

60,000 Hrs (Typ.) / 50,000Hrs (Min.), View

angle- 178/178 Degree.Touch Technology-

Infrared(IR), Number of Touch points -20

Nos.,Type of CPU- Inbuilt CPU with slot

provision for open pluggable

specification(OPS), Core-4, SSD Storage-

64GB, Wi-fi & Bluetooth connectivity- In

built Make- LG/SAMSUNG or better

Warranty:- 3 Years Inspection :Consignee."

10 10 "Supply, Installation, wiring, testing & Set 3.00 72033.90 216101.70

commissioning of 65"" LED based VDU

(Professional Monitor) with 4K resolution,

suitable for 24X7 application for Control

Terminal of E.I. System as per RDSO spec.

No. RDSO/SPN/192/ 2019 Ver. 2 or latest

with Technical specification : Display

Technology- In plane Switching(IPS) ,

Display Type- Anti-Glare LCD with direct lit

LED, Display Panel Size( Diagonal)-65"",

Minimum Display resolution (Horizontal X

Vertical ) - 4K UHD-3840X2160, Life time

60,000 Hrs (Typ.) / 50,000Hrs (Min.), View

angle- 178/178 Degree.Touch Technology-

Infrared(IR), Number of Touch points -20

Nos.,Type of CPU- Inbuilt CPU with slot

provision for open pluggable

specification(OPS), Core-4, SSD Storage-

64GB, Wi-fi & Bluetooth connectivity- In

built Make- LG/SAMSUNG or better

Warranty:- 3 Years Inspection : Consignee."

11 11 "Supply and installation of Modular Office Numbers 4.00 122528.20 490112.80

working console. Specification:- Primary

Table Top Material Type-Particle Board,

Type of Material of Finish / Lamination in

Primary Table Top-Laminate, Primary Table

Top Thickness -25 mm. Width of Primary

Table Top (Tolerance ±50 mm)-2400 mm,

Depth of Primary Table Top (Tolerance ±20

mm)- 900mm, Height of Primary Table Top

- 750 mm Secondary Table Top Edges- 'L'

Shaped, Width of Secondary Table Top -

1800 mm, Depth of Secondary Table Top

(Tolerance ±20 mm) -250 mm, Height of

Secondary Table Top-1050 mm Make-

GODREJ or better. Inspection : Consignee."

SEALDAH DIVISION-S AND T/EASTERN RLY

12 12 "Supply of Monitoring device for diagnostic Numbers 3.00 134564.00 403692.00

purpose as per Specification : Processor

Make : Intel Processor Generation

13,Number of Cores per Processor : 16,

Processor Description : Intel Core i7,

Processor Number : Intel Core i7 13700,

Operating System (Factory Pre-Loaded)

:Windows 11 Professional, RAM Size : 8 GB

RAM Expandability up to : 64 GB (using

spare DIMM Slots) Type of Drives used to

populate the Internal Bays : PCIe_SSD ,

Total SSD Capacity :512 GB, Display Size :

27 INCHES, Display Type : Non Touch, Panel

Technology : IPS Display Resolution :

1920x1080 PIXELS Availability of Webcam

integrated with Display : Yes Motherboard-

Chipset Series: Intel Q Series, Chipset

Number : Intel Q670, Warranty : 3 Years.

Warranty : 3 Years, Make : HP, DELL or

better Inspection : Consignee."

13 13 "Supply of Fault and Incident Report Numbers 15.00 19723.73 295855.95

Generation Device. Specification :- Printing

Technology- Laser, Cartidge Technology -

Composit Technology, Paper Size-A4,

Resolution - 1200X1200(Dpi) , Processor

Speed - 400MHz, USB Port- Yes.

Certification-UL,CE, Warranty- 3 Years,

Make HP( HP-Laser 1008W), or supirior

Inspection : Consignee"

14 14 "Termination of Outdoor Cables (Main Per 503.00 7.63 3837.89

Cables /tail cables) at both ends in location Conductor

boxes, cable termination rack in relay

room, station building, generator room etc.

The item includes dressing of cables and

wires with dressing threads as per standard

practice. All material required for this item

will be supplied by contractor. The outdoor

cable shall be terminated in Relay Room,

DG Room, ASM Room etc under supervision

and instructions issued by Engr. incharge of

the work. Inspection: Consignee Note :

Twisting of Quad cable to be done before

termination at location boxes/CT rack/OFC

room/SM Room/CT boxes as per Technical

Policy Circular No-110 dt. 11.06.24"

15 15 "Supply of Disconnect Terminal Block, Numbers 945.00 46.61 44046.45

Screw less type, 4-wire front entry (Two in-

put & Two out-put) The colour will be

decided by Engineer - in - Charge.

(Preferably In Blue, Red & Grey Colors in

the ratio of 1:2:3) Inspection : Consignee "

16 16 "Supply of End plate 2.5mm/0.091 in thick Numbers 98.00 8.47 830.06

as per site requirement. Inspection :

width as per site requirement. Inspection :

18 18 "Supply of Carrier Rails for above 35mm x Metre 32.00 92.37 2955.84

7.5mm, 1mm/0.039 in thickness un-slotted

type as per site requirement. Inspection :

SEALDAH DIVISION-S AND T/EASTERN RLY

19 19 "DURING THE EXECUTION OF THE WORK, Man-Days 10.00 3854.00 38540.00

DISMENTALLING / REFIXING / SHIFTING AND

OTHER ALLIED WORK OF S&T EQUIPMENTS

LIKE VDU, FURNITURE, MONITORING

DEVICE, INCIDENT GENARATION REPORT

DEVICE AND OTHER MISCLLANIOUS WORKS

TO BE EXECUTED. THIS JOB INCLUDES

COST OF RELEASING OF S&T EQUIPMENTS,

GEARS & DEVICES AND RECONNECTION OF

THE SAME AFTER THE WORK. THIS WORK

TO BE EXECUTED AT ANY TIME OF DAY /

NIGHT AS PER THE INSTRUCTION OF

RAILWAY SITE ENGINEER(S). 1 ELECTRICAL

WIRE MAN, 2 FITTER & 1 KHALASIS/

HELPERS TO BE PROVIDED PER DAY AS

ONE(1) GANG FOR THIS JOB. Note: Mandays

in unit column indicates Per Day/Per Night"

20 20 "Supply of Office Chair make Godrej interio Numbers 34.00 5063.00 172142.00

legs office chair non-revolving and non-

tilting chair with arm rest , Understructure

materials - ERW tube conforming to IS :

1161 latest, Shoe/Studs materials-

Polypropylene , Seat material - Moulded PU,

Thikness of PU used in seat- 45mm, width

of Seat- >450mm, Backrest material- Mesh,

width of back rest- >450mm. Make- Godrej

or better quality of reputed brand.

Inspection: Consignee"

21 21 "Supply of Steel Plain Almirah with 4 Numbers 15.00 14544.92 218173.80

adjustable slaves Size: 1980mm height, 915

mm width and 485 mm depth. Make-

Godrej or better Inspection: Consignee"

22 22 "Supply & installation of Color LaserJet Numbers 4.00 412295.76 1649183.04

Managed multifunction Printer (Print, copy,

scan, fax) (A4/A3/Legal size) with having

Print technology:Laser, Print Speed:

Monochrome Black & Color :31 to 35 PPM,

Display: Touchscreen Color Graphic Display

(CGD) , Connectivity:USB Port ,Ethernet

Port,Wi-Fi, Min 02 Nos Paper Tray, Scanner

type:ADF & Flatbed, Scan resolution: Up to

600 x 600 dpi or better, Warranty : 3 Years

Make-HP Color LaserJet Managed MFP

E78635dn/Brother or better. Inspection:

23 23 "Supply of 1TB Solid State Drive (SSD) with Numbers 20.00 9313.56 186271.20

speeds of up to 1050MB/S1 and write

speeds of up to 1000MB/S1, Password

enabled, Cross compatible USB 3.2 gen-2

and USB-C, Warranty : 3 Years, Make-

SanDisk/Seagate or better. Inspection:

Synchronization of Datalogger and RTU

clocks with GPS. Make- Efftronics or better.

Inspection: Consignee"

25 25 "Supply of Network Attached Storage (NAS) Numbers 4.00 76271.19 305084.76

4-Bay Diskstation R1600 Dual-Core or

better having Digital Storage Capacity-

16TB, Hard Drive Size-16TB SSD with 4X

4TB SSD (Make-Seagate or better), Ram-

4GB DDR4 , 2xRJ-45 1GbE LAN-Port, USB

,Data Transfer Rate- 1000 Mbps or

higher,Warranty : 3 Years, Make-Synology

or better. Inspection: Consignee"

SEALDAH DIVISION-S AND T/EASTERN RLY

26 26 "Supply of Network Management System Numbers 1.00 512780.00 512780.00

(NMS) for FOIS/UTS/PRS having Device

Management,fault analysis, performance

and Network Monitoring facility and life

time licensed for 500 devices. The system

must have embedded alarm generating and

management system Hardware and

software requirement as per technical

specification in Annexure A. Inspection: