Construction Of Burning Shed At Periyar Nagar Burial Ground And Construction Of Compound Wall at Ammanpettai Keela Street Burial Ground In Veppathur Town Panchayat

Boring, providing and installing Bored cast-in-situ reinforced cement Concrete pile of specified diametre and length below the pile cap in cement concrete 1 :1.5:3 ( 1 cement, 1 .5 Coarse sand,& 3 graded stone aggregate of 20 mm nominal size) to carry a safe working load not less

Earthwork excavation for foundation in all soil and sub soils of full depth an may be directed except hard rock requiring blistering including inclusive of showing shutting and bailing out water where over necessary and refilling the sides of foundation with excavated earth in layers not more than 10 cm thick well complying with standard specification depositing the surplus earth with in the compound in places show by the departmental officers with initial leads and clearing and leveling of site etc., complete complying with standard specification.

Supplying and filling fine M sand in layer not more than of 15 cm thick including water with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidental charges etc., complete.

Cement concrete in 1:4:8 (One part of cement, Four part of sand Eight part of ISS gauge HBG metal) using 40mm ISS gauge HBG metal including cost of conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing dumpling and laying in layer of not more than 15 cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc., as per T.N.D.SS.No.28.

Brick work in cement 1:5 mix (One part of cement Five part of sand) Using well burnt country brick of size 8 ¾ x2 ¼ x2 ¼ including cost and conveyance of the brick at site including cost of cement and all other incidental charges and labour charges etc. complete for foundations and basement TNDSS No:31. (a) Upto 1m Height

Above 1m Height

Reinforced Cement Concrete 1:1.5:3 (One part of cement One and half parts of sand Three parts of ISS gauge HBG metal) using 20mm ISS gauge HBG metal including cost and conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing damping and laying in layer of not more than 15cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc complete.

Supply and erecting, centering for sides and soffits of all R.C.C. works including strutting, scofflding, casurina, casurina poles of 75 mm c/c and cross bracing of 60 cm c/c and over the top country wood runner of 60 cm c/c including loft and conveyance of all wood works and hire and running charges including cost of all labour charges for centering and strutting etc., complete as per standard specification as per directed by the departmental engineers. (a) For Coulmn footing and plinth beam

For plain surfaces

Supplying fabricating and placing to position MS or RTS rods including cost of steel, binding wire and labour charges for cutting bending, cranking, tying and lying in position etc., all complete as per standard specifications.

Plain cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering with CM 1:5 mix 12 mm thick in all floors complying with including cost and conveyance all materials and labour charges for mixing applying and finishing smooth etc., complete as per standard specification.

Special Ceiling Plastering with CM 1:3 mix 10 mm thick in all floors complying with including cost and conveyance all materials and labour charges for mixing applying and finishing smooth etc., complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles 20 C.m x 20 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges 10m2.

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification..

AMUTHA