Provn of 04 x rooms along with toilet block near quarter guards of 1 EW Bn loc for Med Regt and Provn of sorting out and inspection shed of 106 (I) comp pl ASC at New Mil Stn under GE Kapurthala.

M&L for PCC (1:5:10) type E2 using 40mm graded aggregate as in sub base and foundation filling complete all as specified and directed by Engineer-in-charge.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement Paste pointed in white or colour cement to match the colour, including 10 mm thick cement screed bed (1:4) Complete all as directed by Engineer-in-Charge.

M&L for mild steel TMT bars10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge .

M&L for 10mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by EIC.

Supply and apply high build elastomeric waterproofing coated based on pure hydrophobic polyurethane cold applied or spray, brush applied, membrane with an elongation of 280 % and tensile strength of 2.7N/mm2 as per ASTMD 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure, minimum 88% solid content. The system includes final base preparation, epoxy primer application with 100% water dilution and pure polyurethane application in two coats with minimum consumption of 1.2 kg/sqm complete all as specified and directed by Eng-In-Charge.

Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel and benching for manholes and haunching around manholes frames including necessary form work and finishing exposed surfaces even and smooth without using extra cement.

Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 m dia X 4.50 m effective depth (DRG No CEJZ/STD-242/07)

M&L for 20 users on site LLDPE conventional Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete

M&L for Sand filing under floors or in foundations including watering and consolidation

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thick ness, M-40 grade with grey cemet and pigment over sand cushioning complete all as specified.

M&L Precast cement concrete block masonary with solid block (size 30x20x10 cm) as in edging ,type B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in mortar 1:4 complete

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

RATE In Figures To be entered by the Bidder Rs.

One light point controlled by one 1-way switch.

One ceiling / exhaust fan point controlled by one switch.

One three pin socket out let 5 amps on independent board complete.

M & L for point wiring with 1.5 Sgmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and incuding 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting modular switches, Socket, bell push, fan requiators etC. as required with modular frame and cover of 1 module to 18 module as required at site all as specified and as directed for the following points :-

S&F switch modular type 6A 240 Volts complete all as directed

S&F switch modular type 15A 240 Volts complete all as directed

M & L ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed

S&F modular socket outlet 2 in 1, 3 pin, 5/6 amp with shutters complete.

S&F modular socket outlet 2 in 1, 3 pin, 5 and 15 amp with shutters complete.

Taking down old unserviceable Lamp holder & S&F Lamp holder, PVC/Polycarbonate angular type with LED lamp base B-22 (holder type) 7 watts complete all as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with copper wound complete all as specified and directed. Note: (1) Rate for taking down C.fan & trasportaion to deposit at E/M storeyard to ceiling fan deemed to be incuded in this rate. Make : Orient electric automiser, Crompton Energion HS 1200, Havells efficiencia.

Supply and fix metallic Heavy duty Exhaust fan copper wound with double ball bearing continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 900 rpm, 230V.

S&F LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make -Philips/Crompton/Havells

Each Job

|S&F LED decorative wall Lights 16/20 W 230 V complete all as directed at site. Make: Philips : Grace Wall light/Havells/Crompton

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, Earth bar, double door TPN 4 way 230 volts all as directed. Make - Indoasian/Legrand/Havells

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, Earth bar, double door SPN 8 way 230 volts all as directed. Make - Indoasian/Legrand/Havells

S & F Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp. Make :Havells/L&T/Legrand.

S&F MCB Single pole 240 volts 6-32 Amps, 10KA, B-series, Make - Havells/L&T, Legrand

S&F MCB SPN 240 volts 0- 32 Amps, 10KA, B-series. Make - Havells/L&T, Legrand

S&F MCB TPN 415 volts 25 - 100 Amps, 16KA, B-series. Make - Havells/L&T, Legrand

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provi

sion of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as directed.

S&F electric water heater, storage type ABS body with metalic inner tank and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, Automatic Thermal cut-out and multi function valves, NRV, 450 mm brass connection pipe etc. Make- Havells monza DX/Usha Aquerra/ Racold Classico

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus spoil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.

Supply and fixing GI tubing medium grade 25 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed (Excavation and earthwork shall be measured and paid for separetely under approprite item)

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI tubing medium grade 40 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed (Excavation and earthwork shall be measured and paid for separetely under approprite item)

Supply and fixing GI tubing medium grade 40 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed (Excavation and earthwork shall be measured and paid for separetely under approprite item)

Supply and fix in replacment of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 40 mm bore complete all as specified.

Supply and fix in replacment of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 15 mm bore complete all as specified.

M & L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i) Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.

M&L for Cutting cast iron/GI pipe up 40/50 mm bore, in position for insertion of new tees of suitable size including jointing materials complete all as specified and directed