Development of Atmakur Layout

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and mixture of gravel and soft disintegrated rock SS 20B including shoring, strutting, sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for finished item of work for foundations of building (APSS NO.308)

Collection, supply and filling of HBG 2.36mm and below from approved quarry to work site and stacking at work site to Dept. gauge for premeasurements including cost and conveyance of all materails and all labour charges etc complete as per standard specifications. Clause 305.3.9 MORD & 3o4 MORTH

Manufacture, supply and delivery of DWC pipes, including transportation suitable for Electrical system as per relevant IS Code 16098-2 as and when amended or equivalent pipes including laying and jointing with solvent cement or any other suitable material, in “EN 13598: Part1(ICs) 2010/ Part2 (MHs)2009“ for 150mm dia

Supply, Delivery & Manufacture High-Density Polyethylene pipes designed to meet the requirements of the Underground Water System. Conform to the latest specifications laid out in IS Code 4984 PN10 or equivalent standards, This comprehensive service includes not only the provision of the HDPE pipes but also their professional installation, involving the laying and jointing of pipes through various methods such as Electro Fusion, Moulded, Fabricated, and Butt Welding. The HDPE pipes will be skillfully laid and jointed in accordance with the highest industry standards, will be expertly employed as appropriate to ensure watertight connections throughout the system. The comprehensive service extends to the provision of all necessary connections to fulfill the requirements of individual plots. Will include high-quality Brass or PE Service Saddle,Compression MTA's (Male Threaded Adapters), FTA's (Female Threaded Adapters), and Compression End Caps. Each house will also be furnished with a 20mm diameter HDPE pipe measuring 2 meters in length. For the systematic management of water distribution within each zone, the service will include the installation of Butterfly Junction Valves. These valves will be Covered with square covers designed to withstand substantial loads of up to 2.5 metric tons. The installation process is completed, until rigorous testing and commissioning activities have been conducted. This ensures the functionality, reliability, and durability of the entire system. 110 mm dia HDPE Pipe

90 mm dia HDPE Pipe

63 mm dia HDPE Pipe

Manufacture, supply and delivery of DWC pipes, including transportation suitable for Underground Drainage system as per relevant IS Code 16098-2 as and when amended or equivalent pipes including laying and jointing with solvent cement or any other suitable material, including connections from individual plots duly providing required specials such as ,Eccentric reducer (160x110),swept Tee 110 mm, socket plugs 110 mm, bends 110 mm, long swept bend 110 mm, suitable reducing Tee for 110 mm as and when required along with 110mm dia UPVC pipe for a length of 1.5 mts for each house, and providing PE manhole chambers not less than the specification mentioned in “EN 13598: Part1(ICs) 2010/ Part2 (MHs)2009“ for 150mm dia, 200mm dia with cover capable of carrying load of 10 tones with up to a depth of for 450X160mm 1 mtr, 450X200mm 1. mtr, 600X200mm 1.2 mtr Chamber of 184 Nos ( including base + dynamic riser and SFRC frame&cover ) at every TWO plot junction intervals on straight lines or at each junction including testing and commissioning. 150 mm DWC pipe

200 mm DWC pipe

Plain cement concrete corresponding to M 20 prop mix nominal mix (Cement: fine aggregate: coarse agregate) using 20mm size hard broken granite (IS 383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse agregate, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidential, and labour charges such as mixing, laying and ramming concerete in layers in position not exceeding 15cm finishing top surface curing concrete etc., complete for finished item of work. Electrical Chambers

Laying and fixing of cement brick to support of pipe line at 3 mtrs interval including cost and conveyance of all materials and labour charges etc coplete for finished item of the work

Fixing of Steel faber reinforced concrete grated (a metal concrete, or plastic barrier made of parallel or crossed bars used to cover drainage inlets etc frame and cover 2'x2' of size and load baring capacity of 35 Tones including cost and conveyance of all materials and labour charges etc complete finished item of the work.

Supply and fixing of RCC Rings including cost and conveyance of all materials and labour charges etc complete

Foundation and errection charges for 7.50 Mts long Octagonal pole on bridge kerb portion (R.C.C) duly rovided 4 Nos 8" Anchor bolts/M20X suitable "J" type bolts etc dully drilling holes to RCC slab and with V.C.C M15 concrete for base concreting up to a height of 8" with necessary Reinforcement work etc including cost and conveyance of all material and all albour charges etc complete as directed by the department officers.

Supply and Transporation of Outer dia 50mm and inner dia 38mm double walled corrugated Hdpe duct made as per specification BSEN-500 86/IS 14930 Part-II with all accessories like couplers, bends end caps ts etc complete. Makes:DURA Line (Dura Guard)/Bajaj/ Gamson/Ultra Plus/ CPE.

Supply and Transporation of Outer dia 63mm and inner dia 51mm double walled corrugated Hdpe duct made as per specification BSEN-500 86/IS 14930 Part-II with all accessories like couplers, bends end caps ts etc complete. Makes:DURA Line (Dura Guard)/Bajaj/ Gamson/Ultra Plus/ CPE.

Laying of HDPE Pipes including cost and labour charges etc complete for finished item of work

Manufacture supply delivery and fixing of MS gate of size 5x2.1m including cost and conveyance of hold pasts, all drops, all material and labour charges for fabrication and fixing for finished item of work.