Special repair and maintenance of 7 Nos Anganwadi Buildings at Andrott

Amount

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Sheet

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

0.80mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete

0.80mm thick with zinc coating not less than 275gm/m2

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sqm and below

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix

Brick work in super structure above plinth level upto floor five level in C.M.1:6 (1Cement: 6 metal sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing karimaruthu wood or equivalent 25 mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent

Providing 40 x5 mm Iron hold fast 40 cm long including fixing to frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size )

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required.

White EWC pan with plastic seat and lid

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required.

White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.

Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour

600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190 gms.

Providing and Fixing PTMT liquid soap container109 mm wide,125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour,weighing not less than 105 gms

Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 fine sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on exposed surfaces including centering and shuttering in -

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work

110 mm nominal bore

Providing and laying vitrified tiles in floor with diffrent sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved brand and manufacture, in all coulers and shades, laid with cement based high polymer modifeid quick set tile adhesive ( water based ). (Khajaria polished itrified tiles or equivalent Size of tiles 1000x1000 mm

Providing and laying vitrified tiles in diffrent sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of pproved brand and manufacture, in all coulers and shades, in skirting , riser of steps,laid with cement based high polymer modifeid quick set tile adhesive ( water based )(Khajaria polished vitrified tiles or equivalent) Size of tiles 1000x1000 mm

Providing anf fixing on wall face PVC. soil waste and vent pipe

(a)100mm dia pipes

Providing and fixing PTMT grating of approved quality and colour.Circular type

(a)100 mm nominal dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)

15 mm nominal outer dia Pipes.

Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete.

15 mm nominal bore

Providing and fixing consealed C.P. Brass stop cook of approved quality and manufacture complete.

15 mm nominal bore

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

Painting Wood work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture (New work)

15mm cement plaster 1:6 (1cement :6 coarse river sand) on rough side of single or half brick wall

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm

Dislodging of septic tank including disposal of sludge by digging a pit within a lead of 50 meters and covering it with sand including adding disinfectants etc..including washing the tank and re-arranging of soak pit ,manhole etc..complete as directed by the Engineer-in-charge.

MOHAMMED HIDAYATHULLA

Muhammed Mansoor P N

MOHAMMED NAZERBAPPATHIYOD

MOHAMMED ALI AKBER P

KAMAL ABDUL NAZARANZIL, ANDROTH, LAKSHADWEEP

KACHIPPULLA

bazil ali