PROVN OF TOILET BLOCK FOR JCOs OR LINE AREA OF 173 I RKT REGT WKSP AND Gd NEAR BLDG NO 6Z AND PROVN OF ONE OPEN STORE FOR GEN STORE AT 21 CORPS OMC AT NASIRABAD

Amount

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, laying pipes, cables, etc n.exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and not exc 1.5m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified & directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified & directed.

Spreading, leveling, watering and well ramming in layers n.exc 25 cm thick with soil complete all as specified & directed.

Removal of excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified & directed.

Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends , and binding with and including binding mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 6 to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends , and binding with and including binding mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel framed work such as gate, grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for RCC M-25 grade (design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-25 grade (design mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for RCC M-25 grade (design mix) mix using 20mm graded aggregates as in Roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-25 grade (design mix) mix using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc, flat surfaces of concrete , surface is required to be fair finished complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, flat surfaces of concrete, surface is required to be fair finished complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works n. exc. 200mm thick surfaces fair finished complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n. exc. 20cm wide and sides of RCC/PCC band in walls etc surfaces fair finished complete all as specified and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete, surface is required to be fair finished complete all as specified and directed.

BLANK

M & L for RCC M-25 grade (design mix) B 1, using 20mm graded crushed stone aggregate as in chajjas complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggrigate), 40mm thick as in DPC using WPC @ 3% by wt of cement complete all as specified and directed.

Supply only integral water proofing compound, ISI marked complete all as specified and directed.

M&L for bitumen for waterproof and dampproof course of any grade complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, metered /stopped ends etc complete all as specified and directed.

Add or deduct for extra for forming channel above or below 25 mm girth for each 3 mm complete all as specified and directed.

Supply & laying FRP septic tank package type waste water treatment system (PWTS) Model No. PWTS-AM-180-01 of Sintex or equivalent 1490mm dia and 1615mm height including necessary inlet & outlet pipe designed to carry sewage and salvage water, With UPFLOW FILTER INLCUDING MEDIA including necessary excavation, PCC (1:4:8) below foundation bed, vent pipe, inlet and outlet connection pipe upto 2.00m length etc, complete all as specified and directed. Make :- Model No. PWTS-AM-180-01 of Sintex or equivalent make if approved by GE.

M & L for soakage wells including excavation in any type of soil, foundation in PCC (1:4:8), walls of honey combed fly ash brick masonry with top ring of RCC 1:1.5:3 type A-1 concrete including intercepting chamber and screen chamber made of fly ash brick masonry in CM (1:6), RCC cover slab in1:1.5:3 type A-1 & SFRC MH cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia & 2.0m effective depth all as per drg No. CEBZ/TD/78/2011 sh No 1/2 & 2/2 complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks , straight or curved on plan to any radius built in half brick thick wall, built in CM 1:4 complete all as specified and directed.

M&L for stone walling of Random rubble, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm crushed stone aggregate) as in copings bed plates and the like including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and directed .

M & L for hardcore of broken stone gauge exc 63mm but n. exc. 100mm deposited, spread and levelled in layers n exc 15cm thick including watering and ramming to a true surface complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M&L for 38 mm wide glass dividing strips, 3mm thick and inserted in position as in flooring complete all as specified and directed.

M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternate bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

M & L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, floors complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) & 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) complete all as specified and directed.

M & L for rubberised machine pressed precast conctete interlocking paver block any shape and size ISI marked of 60 mm thickness, M-35 Grade with grey cement and pigment coloured,reflective type of approved quality laid over and including 25 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M & L for glazed ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile over and incl 10mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

BLANK

BLANK

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces as in ceiling surfaces (CM 1:4), finished even and smooth complete all as specified & directed.

M & L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceilings and applying three coat of white wash complete all as specified and directed

M & L for preparation of newly plastered surface of ceiling and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for rolled mild steel work as in door frame (Chowkhats) including provn of 10m dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S & F hold fasts of flat iron confirming to Fe-290 Gde-E-165 including preparing the surface & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified and directed.

S&F factory made PVC solid frame of size 50mmx47mm made out of 5mm prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. square tube and fixing in opening as per specification & drawing on page 160 of SSR-2010 complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2 raised panel design with 2mm thick moulded prelaminated PVC sheet on front face & 2mm thick plain colour PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed.

S & F second class HW Hollock/Sal/Bansum 35mm thick, factory made, plain framed, paneled shutter (three panels) with panels of 9mm thick BWP marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S&F steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7 complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples with complete all as specified and directed

S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S & F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

S & F stainless steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.

S & F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.

S & F 150mm long aluminium, anodised, barrel tower bolt of extruded section, ISI marked complete all as specified & directed.

S&F 125 mm long extruded aluminium alloy handle cast type anodized complete all as specified & directed.

S&F 250mm long Aluminum alloy, anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminum alloy complete all as specified & directed.

M & L for preparation of new steel & iron surface of width or girth exceeding 10cm and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer complete all as specified and directed

M & L for preparation of new wooden surface exc. 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

S & F for rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 25mm bore gun metal gate valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

All as per item No. 72.00 here-in-before but 20mm dia

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 74.00 here-in-before but 20mm dia

All as per item No. 74.00 here-in-before but 25mm dia

S&F bib tap long body ,fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore of pipe complete all as specified and directed.

S & F stop/angle valve, 15mm bore, cast copper alloy fancy type, chromium plated with long shank & cup, screwed down, high pressure, screwed both ends for iron pipes complete all as specified and directed.

S&F chromium plated 15mm bore stop/angle valves, fancy type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions with long shank & cup (concealed type) complete all as specified and as directed by Engineer-in-charge.

S&F oval shape WHB fixed on granite platform complete including CP barss waste fitting, CP fancy type round neck pillar cock, union, PVC rigid waste pipe fixed with clamp, PVC connection etcand including 16 to 18mm thick granite platform of size not less than 900x600mm complete all as specified and directed. Make -: Cera, Hindware, Jaquar (Ist quality)

S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

S & F Vitreous China, wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bootm and mild steel chromium plated hinge device including connections to drain (or outgoing pipe), and to flushing pipe anti symphonage pipe etc complete all as specified and directed.

S&F PVC valve less syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F CP Jet flush including plate & PVC connection complete all as specified and directed.

S & F vitreous China urinal, flat back, half stall type white/ivory colour with grating and union for discharge including connection to flushing pipe and outgoing waste pipe complete all as specified and directed.

S & F PVC connections 15mm size, 600mm long with PTMT nut of approved quality complete all as specified and directed.

S&F 32mm dia 750mm long PVC waste pipe complete all as specified and directed.

S&F 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed.

S&F aluminium anodised tubular towel rail including brackets, 20mm dia, D type, 600mm long fixed with screws complete all as specified and directed.

S&F brass chromium plated shower rose of 125 mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F PVC (SWR) floor/nahani trap with grating 75mm dia fixed with lead joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, laid in trenches or in floors complete all as specified and directed.

All as per item No. 93.00 here-in-before but 75mm bore PVC (SWR) pipe

S&F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified and directed.

S & F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

All as per item No. 96.00 here-in-before but 75mm vent cowl

S&F PVC (SWR) 110 mm bore bend/shoe of any radius fixed with cement joint complete all as specified and directed.

All as per item No. 98.00 here-in-before but 75mm bore bend/shoe

M&L for 50mm thick sand stone slabs in sun shades, chajjas, shelves cills, landings, cover stones, templates etc, n.exc 2 m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

M & L PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in bed of drain pipe of 150mm dia (nominal) including packing under and haunching against the size of after they are laid and tested complete all as specified and directed.

M & L for 150 mm bore salt glazed stone ware drain pipe ISI Marked laid in trenches and jointed in CM (1:1) tested complete all as specified & directed.

S & F rolled mild steel framed work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including drilling for fixing of steel sheeting or other covering confirming to Fe-290 (Gde E-165) quality-A complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest.

Supply, laying, jointing and testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed. Note :- Excavation, earth work, sand cushoning and cable cover will be measured and paid separately.

M & L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables complete all as specified and directed. Note :- For the purpose of payment only punned thickness will be measured.

M & L for old size sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius for cable cover laid flat adjoining to each other width wise complete all as specified and directed.

S & F GI pipe light grade for cable protection of size 40mm dia laid in trenches/ducts or fixed to pole/wall including necessary fixing arrangements with clamp of suitable sizes complete all as specified and directed.

Boring in any type of soil under road 1 mtr below the top surface of road complete for laying and passing through 20 mm dia GI pipe and filling earth after laying pipe including disposal of durplus soil complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall, with PVC laminated sheet top cover 3mm thick with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for One light point/fan point controlled by one, one-way 5 Amps complete all as specified and directed.

S & F switch piano type, flush button, single pole, one way 5 Amps, 240 Volts, complete all as specified and directed. Make : Anchor / SSK /Leader /CONA

S&F ceiling rose surface bakelite, 3 terminals, 63.5 x 17 mm complete all as specified & directed. Make : Cona / SSK / Anchor

S&F MCB single pole and neutral 240 volt, 10 KA, 10 to 20 Amps capacity confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed. Make : Cona / SSK / Anchor

S&F MCB single pole 240 volt 10KA, 5 to 32 Amps confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed. Make : Cona / SSK / Anchor

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including one LED lamp 9/11 watt complete all as specified and directed. Make : Cona / SSK / Anchor

Supply and fixing testing and commissioning energy saving street light luminaire suitable for & including 20 watt LED , pressure die cast housing with epoxy powder coated with colour finish and toughened glasscomplete with individual LED lences and accessories fixed on pole by means of bracket of GI pipe, 32mm bore, light grade 1.20 mtr long, cut to length and bent to shape and mild steel clamp of 40 x 6 mm size, (2 Nos) nuts, bolts of required size and length (01 No nut and bolt shall be passed through bracket and clamps complete all as specified and directed. Make:- Havells Cat Part No LHEWEBP7PL6S015, Bajaj cat part No. BCLST 15W LED, Crompton Cat Part No. LSTS-20-CDL-M, Philips and Wipro

S & F LED tube light fitting retrofit batten with decorative end caps tube (1x18 watt), 230 V for single LED tube light including 1x18 W LED retrofit bar tube with aluminium housing CW 6500 K cover channel, bipin holder, LED power driver, connector block, etc complete with all accessories internally prewired and incuding connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make : Bajaj Cat part No BLRB 18 W CWC for tube BLRB - DB 118 for batten, Havells cat part No LHLDDBXEUL7Z018 (for tube) LHFYBP1TB1W20 (for batten), Syska cat part No SSK - T-8-18W (tube) SSK-TL-22 F (batten), Crompton Cat Part No DMLM1LT8-16for Box and LT18-20 for tube, philips and Wipro

S & F LED mirror light fitting 7 Watt sleek polycarbonate channel with with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make :- C&S Cat part No. LTTB1F5WLED/W, Crompton Cat Part No LCL-07-CDL, Philips and Wipro

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-43 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 2 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F ventilating fan 230 V, 250mm sweep Single phase 50 Hz AC supply including connecting with three core flexiable copper cable complete all as specified and as directed. Make :-Havells Model- Ventil Air DX-White or equivalent ISI mark model of Khaitan/Bajaj as approved by GE.

S&F exhaust fan metal body 230 V, 250mm sweep Single phase 50 Hz AC supply including connecting with three core flexiable copper cable complete all as specified and as directed. Make :-Havells Model- Ventil Air DB or equivalent ISI mark model of Khaitan/Bajaj as approved by GE

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6.00mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia medium grade GI pipe and watering pipe shall be 20mm bore, medium grade including excavation & earth work in any type of soil & disposal of sil chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with life hook made out of 8mm dia bars, watering arrangement with funnel and wire mesh completed all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

GOMA CONSTRUCTIONS COMPANY

M/s SUNIL ENTERPRISES