Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
31 Aug 2026, 3:00 pm7d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Refer details in tender document).
Definition of Similar Nature of Work:- Supply, design, erection commissioning of sewage or effluent treatment plant.
17 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Instruction to bidder : Bidders while quoting the price must take the cognizance of the present minimum wages of labor and anticipated increase in minimum wages of labour during the period of the work. The successful Bidder will be bound to makepayments of minimum wages to the labour as per rates applicable from time to time during execution of the work. The bidder shall quote rates for Schedule D in a manner that ensures compliance with minimum wage requirements (as per latest labour rates of CLC on the date of opening of bid) for NS-16. Quoting rates below the applicable minimum wages will lead to summary rejection of the bid.
To assist in the examination, evaluation & comparison and prequalification of the Tender, the Railway may, at its discretion, ask any Bidder for a clarification of its Bid. Any clarification submitted by a Bidder that is not in response to a request by the Railway shall not be entertained or considered. The Railway request for clarification and the response of the bidder in this regard shall be in writing. However, if a Bidder does not provide clarification of its bid by the date and time communicated in the Railway request for clarification, the bid shall be evaluated as per the documents submitted along with the bid.
Tenderer should comply with the provision of EPF&ESI Scheme as modified from time to time and should registered themselves with concerned authority or submit registration issued by authority concerned within 30 days from the date of issue of (LOA), otherwise no payment will be released.
Quoted Rates shall be inclusive of all statutory taxes like GST, building cess, any allowance, license fee, royalty charges etc. as legally leviable by State, Central Government and/or any other local body/authority.
The tenderer(s) should deposit payment of EPF/ESI with the authority concerned for the preceding month of the wages month irrespective of number of workers and upload on the IR Shramik Kalyan Portal.
(i) Renovation & upgradation of deteriorated old pipes, valves, motor/pumps of IE- 3 rating, old diffuser system & acoustic enclosures of STP Plant in Colony-II Area, PLW/PTA. (ii) Operation, Repair and Maintenance of Sewage Treatment Plant in colony-II, PLW/Patiala. (For two years).
T-19-2026-27~PLW
T-19-2026-27
Open
Works - General
24 Months
Patiala, Punjab
₹0
₹2.1 L
8 Aug 2026
8 Aug 2026
17 Aug 2026
66 items across 4 schedules · ₹1,05,69,884.23 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 20 | 286.85 | 5,737 |
| 2 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 80 | 417.35 | 33,388 |
| 3 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 3.5 | 7,783.65 | 27,242.78 |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 10 | 6,326.05 | 63,260.5 |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 2 | 8,364.2 | 16,728.4 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 15 | 307.95 | 4,619.25 |
| 7 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 12 | 669.55 | 8,034.6 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 10 | 766.55 | 7,665.5 |
| 9 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 200 | 89.65 | 17,930 |
| 10 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 2 | 6,882 | 13,764 |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 6 | 8,512.1 | 51,072.6 |
| 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 450 | 111.95 | 50,377.5 |
| 13 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 60 | 88.5 | 5,310 |
| 14 | Providing and fixing bolts including nuts and washers complete. | Kg | 40 | 140.15 | 5,606 |
| 15 | 1:4 (1 cement: 4 fine sand) | Sqm | 100 | 294.85 | 29,485 |
| 16 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 90 | 55.5 | 4,995 |
| 17 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 75 | 191.4 | 14,355 |
| 18 | One or more coats on old work | Sqm | 90 | 86.55 | 7,789.5 |
| 19 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 3 | 2,007.1 | 6,021.3 |
| 20 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | cum | 8 | 1,239.6 | 9,916.8 |
| 21 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 2 | 2,928.1 | 5,856.2 |
| 22 | In cement mortar | cum | 2 | 1,698.45 | 3,396.9 |
| 23 | Channels, angles, tees and flats | Kg | 400 | 1.9 | 760 |
| 24 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 100 | 4.65 | 465 |
| 25 | Above 150 mm dia up to 300 mm dia | Metre | 125 | 448.15 | 56,018.75 |
| 26 | Above 150 mm diameter | Metre | 10 | 332.25 | 3,322.5 |
| 27 | Up to 150 mm diameter | Each | 1 | 264.65 | 264.65 |
| 28 | Above 150 mm diameter | Each | 10 | 976.6 | 9,766 |
| 29 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 50 | 45.05 | 2,252.5 |
| 30 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 475 | 219.35 | 1,04,191.25 |
| 31 | 65 mm nominal dia Pipes | Metre | 630 | 1,576.9 | 9,93,447 |
| 32 | 100 mm nominal dia Pipes | Metre | 78 | 2,811.75 | 2,19,316.5 |
| 33 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe). | Quintal | 10 | 298.5 | 2,985 |
| 34 | Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials). | Quintal | 16 | 546 | 8,736 |
| 35 | 200 mm diameter pipe | Each | 40 | 377 | 15,080 |
| 36 | Class II | Each | 1 | 4,500.25 | 4,500.25 |
| 37 | Class II | Each | 10 | 13,512.6 | 1,35,126 |
| 38 | Class II | Each | 2 | 27,521.5 | 55,043 |
| 39 | Up to 300 mm dia | Quintal | 16 | 7,509.4 | 1,20,150.4 |
| 40 | Up to 600 mm dia | Quintal | 10 | 17,155.9 | 1,71,559 |
| 41 | 300 mm dia pipes | Joint | 40 | 357.6 | 14,304 |
| 42 | 200 mm dia C.I. Double Flanged Pipe | Metre | 80 | 4,535.1 | 3,62,808 |
| 43 | 300 mm dia Ductile Iron Class K-9 pipes | Metre | 45 | 3,882.7 | 1,74,721.5 |
| 44 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 192 | 1,302.3 | 2,50,041.6 |
| 45 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 128 | 1,309 | 1,67,552 |
| 46 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge. | cum | 128 | 1,309 | 1,67,552 |
| Schedule total | ₹34,32,514.73 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-1to11merged_merged_compressed-compressed1.pdf
ATTACHMENT
CECIRCULAR630merged_1.pdf
ATTACHMENT
TenderDocumentT-192026-27-Copy.pdf
ATTACHMENT
SpecialdataandconditionsSTP.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].