REPAIR AND MAINT OF PLUMBING WORK, SANITARY FITTINGS , ROOF LEAKAGE, SUNKEN FLOORS AND MISC CONNECTED B/R ITEMS FOR OFFICERS MD ACCN AT PATIALA MIL STN UNDER GE (SOUTH) PATIALA

Amount

Dismantling floor hearth wall tilling incl CM (beading bud not backing), removing serviceable tiles to store & rubbish off the premises, complete all as specified and directed

M&L for anti-skid premium quality coloured tiles 300 X 300 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Demolition of cement concrete (un-reinforced) in any thickness (below or above ground level), including removal of debris from site, complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:3) mixed with water proofing compound @ 0.20 Ltr/bags in sunken portion, complete all as specified and directed.

Applying three coat of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg/ sqm complete all as specified

M&L for PCC 1:2:4 type B0 Using 12.5 mm graded stone agg as in as in PCC combing / benching on floor/ wall juction of sunken portion complete all as specified and directed.

PCC 1:7:12 mix, type E2 ( using 40mm graded brick aggregate ) as in filling of sunken portion complete all as specified and directed.

Providing 40mm dia GI pipe medium grade spouts 60cm long including taking down existing pipe complete all as specified and directed.

PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate 25mm thick as in bedding layer under floor tiles etc complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc, including cutting / chasing in wall for concealed tubing, complete all as specified.

Fixing only tubes retrieved from item no 11, with new fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore, complete all as specified and directed.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified.

Fixing only tubes retrieved from item no 14, with new fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore, complete all as specified and directed.

S&F in replacement overhead shower 100mm dia with shower arm of 450mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F in replacement Bib taps, CP, fancy type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F in replacement Bib taps, 2 way CP, fency type with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F in replacement Bib taps with nozzle, CP, fency type with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F in replacement single lever basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and all as specified.

S&F in replacement single liver wall mixer with provision for hand shower but without hand shower, fency type, cast copper alloy, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and all as specified.

S&F in replacement single lever sink mixer with swinging spout,with connecting legs & wall flanges, wall mounted, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in replacement Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F in replacement Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in replacement health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified.

S&F in replacement vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F in replacement Stainless Steel Towel Rack 600mm long with lower hangers including all accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified. Make : Jaquar (Cat No. - ACN-1181S) or equivalent from Hindware/Parryware/Cera as approved by AO

S&F in replacement single bowl with drain board, glossy finish kitchen sink manufactured from 1.0 mm th. 304 Grade stainless steel of size 1040X500 (41"X20") and depth 205mm (8") top mount type including S&F outlet connection pipe for double bowl sink and 304 grade round strainer of 110 mm dia and all other accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified.

S&F in replacement sheet glass shelf assembly consisting of 5.5 to 6mm thick glass shelf 12 cm wide and 450mm lomg with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.

S&F in replacement sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete in all respect all as specified.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Demolition of reinforced cement concrete of any description and in water srorage tank of 500 ltr or 1000 ltr capacity in any position located on terrace of the building including removing the demolished debris to low lying area or out of defence land all as specified and directed.

S&F doubled layered ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves 20mm, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified.

S&F doubled layered ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves 20mm, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified.

S&F 100mm Bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with clamps, including takin down existing waste pipe, complete all as specified.

S&F CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified.

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.

M&L for Cast iron nahani trap with long arm of min 450mm length, with dia of outlet 100mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F Cast iron cowls for 100mm bore pipes complete all as specified.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts, washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs, including removal from site, complete all as specified.

Demolition of mud phuska on roof any thickness, including removal from site, all as directed.

Roughening surfaces of old concrete/terrazo surfaces in floor and vertical surfaces/RCC roof surfaces by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 20mm to maintain a slope of 1:100 ,complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Providing and laying 4mm (-0.2/+0.3) thick APP with mineral finish (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 5.6 Kg/sq.m water proofing membrane mineral finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps over the coat, 4mm th 5 layered APP membrane mineral finish shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Tensile strength in longitueinal and transverse direction as 600±150/400±150 N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 200 N/. Softening point of membrane not less than 145 degree (iii) Penetration @25 C d 15-25mm (iv) Water Tightness 10 kPa (v) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for PCC cement concrete tiles of size 250 x 250 mm and 20 to 25mm thick laid as in roof floor over 15mm thick (1:4) cement bed, set, jointing and pointing with grey cement and pigment complete all as directed

Supply only liquid water proofing compound complete all as specified and directed.

Swami Engineers

FAVOURITE ENGINEERS

M/s Anil Kumar and co.

Buttar Construction Co.