REPAIR AND MAINT OF COOLING APPLIANCES SPLIT TYPE AC WINDOW AC WATER COOLER REFRIGERATOR DEFRIZER DESERT COOLER VOLTAGE STABILIZER AT AF STN PUNE

Amount

M&L for Servicing, cleaning of complete unit (indoor and out door) of air cooled split type AC of any capacity by using blower, cleaning of condenser coil with water, checking all the parts, electrical connection , cleaning the air filters, combing of fins by using fins comb including replacing defective filters, burnt wiring, tightening of electric wiring connections, etc, complete all as specified and directed by Engr -in - Charge

M&L for replacement of existing old Unsv insulation of refrigerant pipes of split air conditioner up to 3 TR cap complete all as specified and directed by Engr - in - Charge.

M&L for replacement of micro processor printed circuit board complete suitable for split type AC as per exiting make & model up to 3 TR Cap complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv PCB of indoor/outdoor unit of Inverter split AC as per existing make & model complete all as specified and directed by Engr - in - Charge.

M&L taking out defective micro processor printed circuit board of split type AC of existing Make/Model up to 3 TR Capacity for repair and refixing to its original place after carry out necessary repair and testing complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv starting capacitor suitable of window type/split type AC's up to 3 TR Capacity as per existing cap complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv running capacitor 30/36/40/55 mfd suitable for split/window type AC 1 to 3 TR cap of existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of capacitor 4/6 mfd suitable for fan motor of (split/window /water cooler/Desert cooler fan motor) existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv swinging motor of indoor unit of split type AC up to 3TR capacity suitable for existing make/model complete all as specified and directed by Engr-in-charge.

M& L for replacement of condenser fan/blower motor with bush and washers as per existing make and model for split type AC up to 3 TR Capacity complete all as specified and directed by Engr-in-charge.

M&L for replacement of existing Unsv compressor unit with new Compressor unit as per existing make & model including taking out the old u/s burnt out Compressor of split type Air Conditioner, unsv replacement of bushes, sleeves, washers nut and bolt, relay terminal cover, clips reqd for fixing of new compressor, cutting, brazing of copper piping, charging of suitable refrigerant gas as required Qty to obtained desired cooling, carry out leak test etc., all as required at site complete all as specified and directed by Engr-in-charge for the following capacity:-

Capacity 1.5 TR

Capacity 2.0 TR

Capacity 3.0 TR

M&L for replacement of Unsv fan blade of condenser unit of split type AC up to 3 TR as per existing make and model complete all as specified and directed by Engr-in-charge.

M&L for leak detection by nitrogen pressure test in refrigerant system of AC, cutting brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas as required quantity to achieve desire cooling complete all as specified and directed by Engr-in-charge for the following capacity:-

Split type AC 1.5 TR capacity

Split type AC 2.0 TR Capacity

Split type AC 3.0 TR capacity

M&L for replacement of unsv contactor kit of split type AC as per existing make & model up to 3 TR complete all as specified and directed by Engr-in-charge.

M&L for replacement of unsv copper tubing 5/8" dia complete all as specified and directed by Engr-in-charge.

M&L for replacement of unsv copper tubing 3/8" dia complete all as specified and directed by Engr-in-charge.

M&L for replacement of unsv power cable cord PVC flexible copper wire 2.5 sqmm 3 core complete all as specified and directed by Engr-in-charge.

Labour only for rectification of water leakage problem by cleaning indoor unit & drain pipe of split type AC up to 3 Ton cap complete all as specified and directed by Engr-in-charge.

M&L for replacement of unsv valve of split type AC up to 3 TR cap complete all as specified and directed by Engr-in-charge.

M& L for replacement of Unsv hermetically sealed/rotary compressor with new Compressor suitable for window type AC , including replacement of unserviceable bushes, sleeves, washers nut and bolt ,foundation legs including relay terminal cover and clips and including cutting, brazing, leak detection, charging of suitable refrigerant gas as required to obtained desired cooling, carry out leak test etc., all as required at site, commissioning and testing complete all as specified and directed by Engr-in-charge for the following capacity:-

Compressor suitable for 1.5 TR Capacity

Compressor suitable for 2.0 TR capacity

M&L for replacement of Unsv electric blower motor suitable for 1/1.5 /2TR capacity window type AC double speed, single phase 230 volt 50 Hz, complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv thermostat switch suitable for water coolers, Window type AC's /split AC's, refrigerators and Deep freezers any capacity, model complete all as specified and directed by Engr-in-charge.

M&L for replacement of starting relay suitable for water coolers, Window type AC's /split AC's, refrigerators and Deep freezers any capacity,as per existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of existing unsv fan motor of desert coolers up to 6000 CFM as per existing model & speed including taking out the old /Unsv motor complete all as specified and directed by Engr-in-charge.

M&L for replacement Unsv water pump of desert cooler with submersible type water pump 0.6 KW, 1.25 m head pump as per existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of Khas pad (set of three) with best quality new pad, for desert coolers of 4000/5000 CFM capacity complete all as specified and directed by Engr-in-charge.

M&L for replacement of fan speed control switch of Desert cooler up to 6000 CFM PVC body unit as per existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of Lover control knob switch of Desert cooler up to 6000 CFM PVC body unit as per existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of unsv fan blade of desert cooler up to 6000 CFM as per existing type make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of honeycomb pads (set of three) of desert cooler up to 6000 CFM as per existing size complete all as reqd at site complete all as specified and directed by Engr-in-charge.

M&L for servicing of water cooler of installed capacity 40/40 to 150/150 Ltrs, cleaning the tank, condenser coil, oiling the fan motor, checking all parts, repair to electrical burnt/loose connection, replacement of rubber gasket, washer minor u/s parts etc. complete all as specified and directed by Engr-in-charge.

Supply and fix hermetically sealed unit new Compressor by dismantling burnt out Unsv Compressor suitable for water cooler including provn of bushes, sleeves, washers nut and bolt for 4/3 Compressor foundation legs including relay terminal cover and clips on and including cutting, brazing, leak detection, charging suitable refrigerant and commissioning/ testing complete all as specified and directed by Engr-in-charge for the following capacity:-

Cooling capacity 40 Ltrs/Hr

Cooling capacity 60 Ltrs/Hr

Cooling capacity 150 Ltrs/Hr

M&L for replacement of freezer of refrigerator as per existing make model including cutting, brazing cap 192 to 385 Ltr as per existing make & model complete all as specified & directed by Engr-in-charge.

S&F CP push cock of 15 mm dia for water cooler and taking out the Unsv push cock and complete all as specified and directed by Engr-in-charge.

M&L for replacement of 15mm brass unserviceable float valve for water cooler (40/60/120/150 Ltrs) capacity complete all as specified and directed by Engr-in-charge.

M&L for Servicing of air curtains, single phase, 240V by checking all electrical connection, blower, motor oiling greasing and replacement of Unsv wire, lugs, bushes, rubber pads, bearing etc. complete all as specified and directed by Engr-in-charge.

M&L for replacement of hermetically sealed/Rotary compressor by dismantling burnt out Unsv Compressor suitable for refrigerators including provn of bushes, sleeves, washers nut and bolt for 4/3 Compressor foundation legs including relay terminal cover and clips on and including cutting, brazing, leak detection, charging suitable refrigerant and commissioning testing complete all as specified and directed by Engr-in-charge for the following capacity:-

165 - 200 Ltrs capacity

285 - 300 Ltrs capacity

M&L for leak detection in refrigerant system of Refrigerator (165 to 300 Ltrs cap) including cutting brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas as required quantity complete all as specified and directed by Engr-in-charge.

Taking out existing split type air conditioners of any type and capacity removing from the site and keeping it in a safe custody for re-use or deposit in store complete all as specified and directed by Engr-in-charge.

Fixing only split type air conditioners of any type and capacity including core cutting for passing copper tubing , drain pipe & cable through stone masonry wall with connected accessories such as bracket, copper tubing, cable from indoor to out door unit and rain water pipe etc as per site requirement complete all as specified and directed by Engr-in-charge.

M&L for replacement of old Unsv outdoor unit of split type with AC 3 star rating, 1.5 TR Cap having copper tubing, high EER rating compressor (for gas R-407/410/32), blower motor etc. complete including, making elect, refrigerant piping connection, brazing, leak testing and charging suitable refrigerant gas to achieve desired cooling effect and testing complete all as specified and directed by Engr-in-charge.

M&L for Servicing of ceiling suspended DX type AHU of VRF system by checking all parts, repair to electrical connection, cleaning of air filter, cooling coil, fan/blower and replacing minor Unsv parts like bushes, nut bolts including taking down air diffuser grill from fall ceiling, cleaning and refixing of the same as directed by Engr-in-charge.

M&L for replacement of Unsv indoor unit of split type AC 1.5 TR complete having 3 star rating suitable for (R-407/410/32) gas complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv MCB SP C series 20 A to 32 A m breaking cap 6kA complete all as specified and directed by Engr-in-charge.

M&L for replacement of Metal plug 20A, 2Pin+Socket complete all as specified and directed by Engr-in-charge.

M&L for replacement of Metal socket 20A, 2 pin+Socket complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv sheet metal enclosure with single pole and neutral with two pin and earth plug and socket complete with one single pole C series MCB 20 Amps, 240 volts complete all as specified and directed by Engr-in-charge.

M&L for sub main wiring with two runs of single core 4.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & capping complete all as specified and directed by Engr-in-charge. Note :Two runs of 4.0 Sqmm copper cable, one run of earth wire of 4.0 Sqmm copper cable shall be measured & paid as one length).

Servicing of air shower for 2 persons by checking all electrical connection, replacing Unsv wire, lugs, washers, sensors, push button, cleaning filters, blower motor servicing, oiling, replacement of bearing of blower assembly, bush etc complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv Doormat magnetic switch of air shower complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv hydraulic Door closer assembly of air shower as per existing make & model complete all as specified and directed by Engr-in-charge.

M&L for repair of Printed circuit board of air shower for 2 persons taking down and re-fixing of the same as complete all as specified and directed by Engr-in-charge.

M&L for servicing, rewinding of stabilizer 4 KVA with copper winding as per existing gauge & turns including replacement of defective items complete all as specified and directed by Engr-in-charge.

M&L for servicing, rewinding of stabilizer 5 KVA with copper winding as per existing gauge & turns including replacement of defective items complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv condenser cooling coils of Split type AC up to 3 TR cap with new copper coil including taking out unsv condenser coil as per existing make & model complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv motor of air curtain as per existing make and model including replacement of bush, baring etc as reqd at site complete all as specified & directed by Engr in Charge

M&L for replacement of Unsv drain flexible PVC pipe of split type AC complete all as specified and directed by Engr - in- Charge.

M&L for replacment of unsv HEPA filters having 99.97% DN to 0.3 MIC of Air shower as per existing make and model complete all as specified and directed by Engr-in-charge.

M&L for replacment of emergency release switch of Air shower including making proper connections complete all as specified and directed by Engr-in-charge.

M&L for replacment of Unsv pre filters of Air shower flange type having efficiency 95% DN to 10 MIC as per existing size complete all as specified and directed by Engr-in-charge.

M&L for servicing of VRL system 53 KW having 03 Nos outdoor units by checking all parts, repair to electrical connection, cleaning of air filter, cooling coil, fan/blower and replacing mirror Unsv parts like bushes, nut bolts etc complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv rotational moulde polyethylene water sotrage tanks (cylindrical vertical with closed top) two layer ISI marked hoisted and fixed in position all as specifed in SSR Pt-I of capaciy 1000 ltrs complete all as specified and directed by Engr-in-charge.

M&L for replacement of Unsv rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) two layer ISI marked hoisted and fixed in position all as specified in SSR Pt-I of capacity 5000 Ltrs complete all as specified and directed by Engr-in-charge

M&L for quarterly servicing of Ductable AC up to 8.75 TR cap including cleaining the indoor filter, outdoor cooling coils, combing of fins, cleaning of the drain pipes etc and setting all the parameters installed at SRE & AFNET complete all as specified and directed by Engr-in-charge

M&L for replacement of indoor unit PCB card of hermetical sealed scroll compressor ductable unit having 8.75 TR, Toushi series single circuit Model No PAG102HZDA3 Make Hitachi complete all as specified and directed by Engr-in-charge.

M&L for replacement of outdoor unit PCB card of hermetical sealed scroll compresssor ductable unit having 8.75 TR, Toushi series single circuit Model No PAG102HZDA3 Make Hitachi complete all as specified and directed by Engr-in-charge.

M&L for leak detection by nitrogen pressure test in refrigerant system of ducable split AC of Cap 8.75 TR including cutting brazing and making leak proof the gas system, cleaning, vaccum the gas system and charging suitable gas as required quantity to achieve desire cooling complete all as specified and directed and directed by Engr-in-charge.

M&L for replacement of unsv centrifugal monoset pump set suitable for working on 415V three phase 50 Hz AC supply having 2900 RPM. 11KW/15HP, discharge 20.58 LPS at 36 mtr head, del size 100x80mm, class B insulation, Model No MBR15.2 Make CGcomplete all as specified and directed and directed by Engr-in-charge.

M&L for replacement of condensor coil blower motor of water cooler 40 to 150 Ltr/refrigerator 190 to 385 Ltr capacity as per existing make ,type & model complete all as specified & directed by Engr-in-charge.

M/s. ANAND ENTERPRISES

M/s Vijay Airconditioning Pvt Ltd