694/PR/JUSNL/2025-26

Dismantling of pucca brick or lime work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable material with all leads all complete job as per direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Reinforced cement concrete with nominal mix of (1:1.5:3) work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement.

Providing designation 75 A Brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 8 mm dia. rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL)

Providing Tor steel reinforcement of 8 mm dia. rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL)

centering and shuttering including strutting propping etc. and removal of form for Lintels, Beams, plinth beams, girders, brussumers and cantilevers

Columns, Pillars, piers, abutments, post and struts

Supplying M.S angle 50 X 50 X 6 mm or other size all complete as per direction of E/I.

Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates,holding down bolts, anchor plates at all heights and depths, bolting, welding(machining whe rever necessary) with applying a priming coat of red lead paint all complete as per approved drawing building specification and direction of E/I.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including preparing the surface after removing rust,dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes as per building specification and direction of E/I.

Carriage of materials (a/a) Cement (22 Km)

(b/b) Coarse sand(Surface 30 KM + 2 KM)

(c/c) Stone chips (Surface 36 KM + 2 KM)

(d/d) Bricks (Surface 13 KM +3 KM)

(e/e) steel (22 Km)

Total

Deduct cost of old serviceble bric obtained after dismantling

Total

Total

Labour Cess @1%

(Note:- The rate quoted by the bidder in % above, % below will be considered against each item of work from Sl. No. 1 to 21.5 )

Please Enable Macros to View BoQ information