Improved access to water through household connections in existing water supply village Kohali Block Chogawan District Amritsar under PRWSSIP 2a ii

Amount

Cost of Repair of Machinery Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make including Submersible cable and column Pipes complete in all respects as per standard Specifications. (1023 LPM 82 MTR HEAD)

Cost of Repair of Control Panel consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. (reputed make) complete in all respects as per standard Specifications.

REPAIR OF PUMP CHAMBER

Finishing walls with exterior decorative cement based paint such as snowcem robbiacem etc. on old work one coat to give an even shade

Distempering with dry distemper of approved manufacture two coats over old distempered surface.

Supplying & Fixing glass panes with glazing clips and special metal sash putty of approved make.Glass Panes 4 mm thick above 0.40 sqm.

Congolmerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. ( Using Mechanical Mixer for Mixing of matirial ) ( Including Carriage.)

Providing and fixing of Glass strips 4mm thick in floors

50mm wide

40mm wide

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. With Special Quality Paint

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. With Special Quality Paint

Wiring fan point without fan box in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size). ( as per ac slip no. 3 on CSR Amendments)

Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. ( as per ac slip no. 3 on CSR Amendments)

Wiring 3 Pin 6 Amp. Plug control comprising wall socket(shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete. ( as per ac slip no. 3 on CSR Amendments)

Wiring 3 pin 16/20 amp. power plug control and switch.

Terracing consisting of tiles 22.86cm×11.43cm×3.83cm laid over25mm mud plaster, 7.50 cm mud filling on an other layer of 25mm mud plaster including two coats of bitumen laid hot @ 1.65Kg. Per Sqm on top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Repair of OHSR 200000 Ltr Capacity

Repair of 6" Sluice Valve's of OHSR Complete in all respects.

Providing & fixing Manhole Cover Size MS 560mmx560mm manhole cover and made of 50x50x8mm angle frame fitted with MS sheet hinged cover of 6 mm thickness, Jali, Gauge 15cm width & lightning conductor of GI 7/10” SWG (10mm) dia. standard wire with lightning rod of 25mm. Dia 0.9 m. Long with earth electrode 25mm dia. 2.75mtrs. long GI pipe from ground level connecting 50mm dia 1.40 m long perforated GI pipe including fixing of clamps as per IS:2309-1969 Complete in all respects.

Repair of Expansion Joint complete in all respects. 150mm DIA

Construction of Brick masonary Toewall in 1:5 Cement Sand Mortar with depth 0.60 mtr, CC 1:8:16 & 12 mm thick cement plaster 1:4 on both side & Top of toewall Complete in all respects.

Providing & Fixing Aluminium Ladder Inside the tank shall be 60cm wide made from Aluminium section LS 974 size, 66.68 x 31.75 x 4 mm, weight 1.27 kg/m with steps made out of Aluminium section H, SP 3024 size 35x16.70x1.60mm, weight 0.362kg/m to be fixed on side in the top dome and other side in the bottome dome

Repair of Development of Water Work Site

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.

Providing & Fixing D hook complete with MS bolt size 300 mm x18 mm as per standard drawing D-7 & Analysis of Rates A-9 complete in all respects.

Minor Repair of Masonry Corner Pillar's including plaster repair complete in all respects.

Repair of 6" & 4" Sluice Valve's inside water works Complete in all respects.

Repair of major leakage of 6" Delivery pipe(CI Pipe) including Providing and Fixinf of C I Tee(6") and CI Assembly(6") complete in all respects

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Minor Repair & replacement of pipe associated with repair complete in all respects (90 mm pvc pipe)

Provoding & Fixing automated Water Controller complete in all respects as per standard Specifications.

Providing and fixing in position CI Bib Cock(tap)(15 mm i/d)as per IS:210 with stainless steel spindle of approved make and Fixng of Nozzle to contro flow of water(to the approval of Enginer-in-charge Complete in all respect

Providing proposed water connections to household up to wall with providing ,laying, jointing, fixing, testing MDPE pipe line 15 mm i/d = 2.00 mtr(Below GL) and ISI Marked G.I. Pipe 15 mm i/d (As per IS 1239) B-Class approved make = 2.50 mtr (Above GL) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM Ferrule as per IS:2692 and 3" i/d clamp with CI Bib Cock 15 mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects. (Connection at Existing pipe line)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)Class PN-1 as per ISI

80 mm i/d Sluice Valves flanged

100 mm i/d Sluice Valves flanged

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department(Including Carriage) Size 0.9m x 0.9m

MS Sign board painting & printing complete as per standard size of DWSS complete in all respects