SITC of glow sign board at the entrance main gate of Emergency OPD at Midnapore Medical College, Paschim Medinipur --- SITC of Glow sign board for MMC Building, Paschim Medinipur.

Amount

Supply & fixing of Glow sign board fabricated with 80mm x 40mm x 3 mm thick M.S. Rectangular Hollow bar (minimum distance between to bar within 45'') and the frame complete with necessary priming and painting. All side of the board will be covered with 3 mm. thick A-1 Aluminium Composite Panel (ACP) sheets (blue Color) fixed with the structure with special type steel nuts, bolts and washer etc. The complete installation will be water, vermin and dust insulated and protected and capable of preventing avoid wind pressure. The corner of the square board will be covered with anodized stainless steel angle (40mm x 40mm) by drilling hole and fixing the same with special type steel nuts, bolts and washer etc. (b) Letter Description: The letter made of Aclrylic Sheet with male female attachment, on router cut ACP Sheet of front incl. all accessories as required. The Design must be pre approved from the EIC. Size of the letters- (i) 1st row-6 ''-22 nos. and Logo- 10'' x 12''-2 nos. (ii) 2nd row- 12''-23 nos. (iii) 3rd & 4th row-5''- 40 nos ( . , - Provide as needed) (C) LED Illumination: High Bright, High Wave length closed type waterproof white LED modules (0.72 W or Higher) mounted on interior side of female part of letter with power wire running back to a central power area with suitable power capacity SMPS or 12 Volt LED Power Transformer to adequately drive the whole LED modules without Flicker.

(d ) Internal Electrical wiring will be done by Halogen Free Flame Retardent HRFR compound insulated (Unsheathed) 1.5 Sq.mm. copper flexible cable through interior conduit and Electrical Raceway. (e) S & F of out door type feeder piller box with locking arrangement and painting, suitable for installation the above mentioned SMPS or 12 Volt LED Power Transformer with other accessories as pere direction of EIC. incl. all accessories as required. The Design and quality of materials must be pre-approved from the EIC. Making necessary arrangement for fixing the board on wall or parapet with required MS angle, nuts and Bolts etc. incl. S & F required MS angle, nuts and Bolts etc. incl carrying charges and mending good the damages. incl. Painting the total metal area with synthetic enamel colour (blue) over 2 coat of R.O. primer as per direction of E.I.C. (matter as per authority directed)

(i) 16 ft x 4 ft (3'' depth), 01 no. (The final board size will be determined by the EIC)

Charges for making heavy type scaffolding arrangement for installation of the above metal sing board at a height of 20’ above GL and for construction of the supporting structure for multiple days as per direction of the EIC.

Erection the above sign board with four nos. required length 40x40x6mm MS angle iron support rigidly grouted on suitable muffing which are making on the roof of the college main gate to avoid the uprooting by wind pressure and painting as per direction of EIC (Approximate Size:16' Length X 4' height X 6" Dept)

Note: 1) All the above rates should be quoted inclusive of all taxes & duties, District charges, Riverine charges and LWC as applicable, with cost of maintenance, servicing, supply & replacement of spares for 1 (one) years from the date of commissioning. 2) The Agency must procure the materials from the manufacture/OEM or their authorised sales Channel so that the standard warranty/support of the manufacturerer/OEM becomes applicable to the product to be delivered and installed by them. Documents that authenticate such procurement from the manufacturer/OEM or from their authorised sales Channel and standard warranty/support should be sent from the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. If any refubrished materials are supplied and installed, penal action will be taken as per existing rule. Before execution of the work the prospective bider has to submit layout drawing as per design of OEM dully approved by the OEM. 3) Total is rounded off to the nearest rupees.

Dinda Enterprise (BID ID -7247743)

M/S H.K.Enterprise (BID ID -7174279)

RAJ KUMAR SINGHA (BID ID -7173425)

SHRI KRISHNA ELECTRICALS (BID ID -7177338)