PROVN OF 01 X TOILET BLOCK FOR DIFFERENTLY

Amount

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn etc in any type of soil all as spd and directed.

Returning, filling, in incl spreading leveling watering and well remming in layers n.exc 25cm all as spd and directed.

M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified.

Removing excavated material n.exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point in any type of soil

M & L for PCC 1:4:8 type D2 using 40mm graded crushed stone agg as in fdn/ sub base complete all as specified and directed.

M&L Brick work with Fly ash bricks in old size bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) all as spd and directed

M & L for Brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius in half brick thick walls built in CM (1:4) complete all as spd and directed.

M & L for 20mm thick Damp proof course to horizontal or vertical surfaces with water proofing compound including necessary formwork in CM 1:2 complete.

M & L for RCC 1;2:4 tye B-1 using 20 mm graded crushed steon agg as in slabs supported on walls, lintel band/ beams and columns in floros, roofs, landings balconies, canopies, dech slabs and in shelves and the like complete all as spd & directed.

M & L formwork to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as spd and directed.

Use and waste of form work to edges of concrete flats, treads breaks in floors, window cills,roof etc n exe 20 cm wide and sidesRCC/PCC bands in wall, horizental or slooping and similar work exe 5 cm but n exe 15 cm wide, fair finished surfaces of concrete all as spd & directed

S & F TMT bars 6 mm to 8 mm dia cut to length, bent to shape required incl crancking bending and hooping ends for stirrups all as spd and directed.

S & F TMT bars10 mm dia and over cut to length, bent to shape required incl crancking bending and hooping ends all as spd and directed.

M&L Rendering 10mm thick internal cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

M&L for two coats of cement base paint to newly plastered surfaces including priming with alkali-resistant priming paint & preparation of surfaces all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick cement plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2, using 40mm graded aggregate in subbase, sub floors, base floor etc all as specified and directed.

M&L 25 mm thick PCC ,type B-1(20 mm graded aggregate) in sub base flooring complete all as specified and directed.

M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. all as spd and directed

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.

20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Box type steel windows/ventilators comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double shutters wire gaugedshutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to F I framework, including other fittings; hinges; handles, tarred hold fasts; PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified and directed.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified.

M & L preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm size

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

S & F for 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as specified.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down as specified.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down as specified.

Stop valve cast copper alloy chromium plated (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F Bib taps fancy type 15 mm bore pipe, cast copper alloy chromium plated complete all as spd and directed.

S&F vitreous China ware wash hand basin white of size 550 x 400mm incl 32 mm dia CP waste coupling and PVC waste pipe and MS steel brackets all as spd.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed.

S&F brass CP tubular towel rail 600 mm long complete all as specified and directed.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified.

S&F Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed.

S&F plastic water closet seat, closed pattern with flat bottom and cover& cover and mild steel chromium plated or aluminised hinging device.

S&F health foucet hand shower 8mm dia 1m long flexible hook and wall hook Make - Jaquar , Marc and Johnson complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F Toilet Paper Holder with flap CP complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

S&F 20 mm bore brass stop cock screwed down high pressure with crutch or butterfly handle screwed both ends for 20 mm bore of pipe all as specified

S&F 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed all as specified & directed.

S&F in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F cast iron cowl for 50 mm dia all as directed by Engr-in-charge.

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 75 mm dia of pipe

Providing precast cement concrete in cover slabs type B-1,1:2:4 (20 mm graded aggregate) for manholes etc shelves and similar articles with plain faces, set in cement mortar 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching for manholes incl necessary form work complete all as spd and directed.

M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C-2 for 200 mm dia pipe, complete all as specified.

M&L 200 mm reinforced cement concrete pipes class NP-2 with one collar per length of pipe complete all as specified.

Cutting into existing manholes for connecting new drains ,making good to pipe and rendering ,cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required all as spd and directed by Engr-in-charge.

S&F 40mm dia Stainless steel Hand rail fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

M&L for Chequered cement concrte tiles 20x20x25mm thick set jointed and pointed in neat cement slurry with grey cement and pigment over 15mm thick screed bed in CM 1:4 all as specified.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M&L Point wiring (Surface) with 1.5 Sq. mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with Multi-stranded copper conductor IS-694 and including PVC rigid concealed conduit (heavy grade) ISI amrked and conduit accessories fixed on walls / ceilings etc. alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one light point controlled by one switch, complete all as specified for one light/fan point controlled by one way switch. Note :- Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.

S & F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.

M & L for ceiling rose, PVC/Polycarbonate, isolated body, three terminals all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 14W LED Lamp complete all as specified.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 4 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F white powder coated CRCA box with decorative end cap batten alongwith LED T8 tubular lamp 20W Linear with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified. Make - Crompton Cat Pt No DMLN1LT8-16 and LED tube Rod Cat Pt No LTT8-20 or Make - Equivalent in Havells/Wipro/Bajaj/GM

S&F Energy saving, surface mounted, bulk head LED luminaire 10 W complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified.

S&F heavy duty metallic exhaust fan AC single phase 230/240 Volts of size 300mm sweep with louvre with grouting nut bolts and making the suitable hole for 300mm sweep exhaust fan by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 6 to 32 Amp all as specified and directed.

S&F in replacement MCB SPN 240V, 50Hz, 10 KA,of rating 32 Amp all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 Sqmm 2 core including 40mm GI pipe upto 1.5m length bend to shape fixed to wall by means of suitable size of clamp nuts bolts complete all as specified.

M & L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50mtr, including PCC chamber in PCC (1:2:4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion.

M/S INDIAN ELECTRICAL

VIJAY KUMAR LAKHNI

M/S J N TRADERS