CERTAIN REPAIR TO MD ACCN IN OLD ALBERT EKKA ENCLAVE JIB ENCLAVE AND CHETTRI ENCLAVE AND OTM ACCN OF CERTAIN UNITS IN THE AOR OF AGE BR I UNDER GE SOUTH UDHAMPUR

Amount

Material and labour for water proofing treatment on roof surfaces with following steps:- Step (i) - Demolition/Dismantling of roof tiles/concrete tiles including cement mortar bedding/mud phusk upto the slab level. Note:- Dismantling/Demolition upto slab level shall be finalised by GE for next process. Step (ii) - Plain cement concrete 1:2:4 for any thickness type B-0 using stone aggrigate to obtain smooth and level surface. Note:- Thickness of roof slab may vary according to surface. No extra payment shall be permissible for obtaining level surface. Step (iii) - Providing and applying two coats of high performance, elastomeric, acrylic polymer modified cementitious coating Perma Super 2k, having a mixed density of 1.73 g/cc manufactured by Perma and applied by Partner applicator. Minimum recommended coverage is 1m2/per kg in coats to achieve a min DFT of 1mm. First apply Perma BOND SBR as a primer coat 1:1 with cement then lay Fibre Mesh of 45 GSM followed by 2 coats. Perma Super2k coating shall exhibit below properties:- Cont.../-

(a) Elongation is 100% as per ASTM D 412 sufficient for Brick wall treatment. (b) Negative Hydrostatic pressure is 4 bars as per ASTM D 7088. (c) Adhesion to concrete is Greater than 1.5N/mm2 . (d) Crack Bridging ability as per AS/NZS 4548.5 min 1mm

Step (iv) - Screed bed in cement mortar 1:4 with fine quality sand. After screed bed cement slurry shall be applied to obtain smooth and fine surface. Step (v) - Waterproof Coating: Providing and applying self-priming coat of Perma No Damp+ by diluting 30% with water and let it dry for 4-6 hrs. Place and then apply 2 coats of waterproofing treatment using Perma No Damp + a gap of 4-6 hrs. Then apply 3 coats of waterproofing treatment using Perma No Damp + a gap of 4-6 hrs. Perma No Damp+ is a fiber reinforced liquid applied elastomeric membrane, made of Hybrid PU polymers/ It has specific gravity of 1.25 g/cc (a) Tensile strength ASTM D412 : 2.5 MPa. (b) Elongation ASTM D412 : 700%. (c) Adhesion Strength: >2N/sqm as per ASTM D 4541. (d) Crack Bridging Ability : >4-5 mm as per AS/NZS 4548. (e) Water Permeability : NIL as per DIN 1048. Make:- ZEDEX, SICA, PERMA

Note:- (i) 100% work including dismantling, PCC, Screed bed and water proofing treatment shall be executed by authorised applicators only. (ii) Ten year warranty shall be furnished by company in Rs 100 stamp paper duly notarised. (iii) Ten year warranty shall also be endorsed in MOU. (iv) Work shall be inspected, checked and passed at every stage by GE and user representative. (v) Ponding test shall be done for 48 hours and is checked and passed by GE and user representative and shall be recorded in work dairy. (vi) Digital proof of every stage shall be submitted and kept in record for payment purpose. No payment shall be made without original Purchase Voucher and digital proof. (vii) Every procured material shall be unsealed in the presence of AGE before application.

Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed

M&L for glazed coloured ceramic tiles in dado/vertical surface size 600mmx300mmx9-10mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

M&L Non - Skid Ceramic tiles (square/rectangular) (size400x400x7mm thick joint free)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

M&L for Non skid coloured tiles (square/rectengular) (size 600x600x9-10mm thick joint free) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

M&L for Non skid coloured tiles (square/rectengular) (size 1200x600x9-10mm thick joint free) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

All as per above item No 8 but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 18-20mm thick (size 600mmx600mm) over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing and moulding etc. complete all as specified and as directed.

M&L for machine cut kota stone 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing etc. complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L Granite slab 16 to 18 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions height of bldg upto 7.50 mtr including scapfoldings complete all as specified and as directed. (Water proofing compound to be measured and paid for separately).

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge/GE.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge/GE.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

All as per item No 25 above but glazed and skeleton shutter with sash bar for glass / wire gauge complete all as specified and as directed.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item as above here in before but without glazing bar complete all as specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note :- i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F 4 mm thick sheet glass frosted ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specified and as directed.

M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board & Iron ladders etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and as directed.

S&F Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and directed.

S&F 19mm thick ISI, termite proof , chemically well pressed, prelaminated particle board(HDHMR) exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand cup boards etc includimg 6mm thick wood beading all around complete all as specified and directed .

Demolition of brick/stone masonry built in CM complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted.

All as per item No 36 above but except stone.

M&L for Precast cement concrete Block (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in bond stones set in cement mortor 1:6 all as specified and directed.

Extra over stone walling for hammer dressing with miximum depression on face from straight edge held against the dressed surface not exceeding 20 mm to face stones (Granite or Trap stone) and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and as directed.

M&L Flush pointing to random rubble masonry in CM (1:4), uncoursed or brought upto courses complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks complete all as specified and as directed.

M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F continuous MS CP piano type hinges 30mm flap (when opened), bright finish or electrogalvanised complete all as specified and as directed.

S&F Aluminium handles, cast type, 150 mm long complete all as specified and as directed.

S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.complete all as specified and as directed.

S&F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour; articles not exceeding 200 Cu.Cm each complete all as specified and as directed.

M&L for Glass dividing strips, 3mm thick of 38mm width complete all as specified and directed.

All as per item No 54 above but 75mm.

All as per item No 54 above but 50mm.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Taking down shutters of any description area exc 1.00 Sqm and n. exc 2.00 Sqm each and removing from site complete all as specified and directed.

S&F harrison curtain rails, C P, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F solid mouled PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II including taking down old frames with doors complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F vitreous China wash basin corner, white, flat back, size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for applying two coats of white washing on ceiling including preparation of new/old plastered surfaces complete all as specified and as directed.

M&L two coats of oil bound distemper on walls including preparation on new/old surfaces including applying 1 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. Note :- (Before applying of wall care putty, complete removing of treatment as directed and approved by Engr-in-charge).

Material and labour for preparation of New plastered surfaces of walls and applying two coats of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge/GE.

S&F vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and as directed.

S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.

Supply only flush pipe of PVC 32 mm dia for low level cistern. all as specified.

S&F MS grating 100mm dia fixed to floor trap.

600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. Make: Parryware, Cat Part No T6001A1 and equivalent in Kohler, GROHE

S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified and as directed.

S&F steel peg set colour coated of six as per sample complete all as specified and as directed.

S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction complete all as specified and as directed.

M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified and as directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm complete all as specified and as directed.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches complete all as specified and as directed.

All as per srl item No 80 above but 75mm bore pipes ditto.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls duly apply a coat of bitumenous black paint complete all as specified and directed.

All as per srl item No 82 above but 75mm bore pipes fixed to wall ditto.

All as per srl item No 82 above but 50mm bore pipes fixed to wall ditto.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and as directed.

S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and as directed.

S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specifiecd and directed.

S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.

S&F Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 75mm bore (fixed in repairs) complete all as specified and as directed.

S&F Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 100mm bore (fixed in repairs) complete all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bend any radius for 110mm bore pipecomplete all as specified and as directed.

S&F cast iron vent cowl for 75m dia pipe complete all as specified and as directed.

S&F cast iron vent cowl for 50m dia pipe complete all as specified and as directed.

S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe complete all as specified and as directed.

S&F Cast iron work in lids for oval access doors for 75mm bore pipes and fittings including all necessary threading and nut/bolt required as directed by Engr in charge/GE.

S&F Cast iron work in lids for oval access doors for 100mm bore pipes and fittings including all necessary threading and nut/bolt required as directed by Engr in charge/GE.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 using 12.5mm graded stone aggregate as chajjas , slabe or similar works etc completed all as specified and as directed.

Taking up or down 15mm Bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

Taking up or down 20mm Bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

M&L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

M&L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm complete all as specified and as directed.

M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm complete all as specified and as directed.

S&F in repair angle valve of brass fancy type, chromimum plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, complete all as specified and as directed. Make: Parryware, Cat Part No T2307A1 and equivalent in Khohler, GROHE

15 mm bore long body Bib tap in repair complete all as specified and directed. Make: Parryware, Cat Part No T2306A1 and equivalent in Kohler, GROHE

S&F Ball Brass Valve high pressure with polythine coat and fly nut complete screwed for Iron pipe or brass ferrule and fixed of size 20mm bore complete all as specified and as directed.

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity complete all as specified and as directed.

15 mm bore wall mixer/sink mixer fixed in repair complete all as specified and directed. Make: Parryware, Cat Part No T2335A1 and equivalent in Kohler, GROHE

S &F sheet glass shelf assembly/corner consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long in repair.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with thread closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified and as directed.

Soap dish in repair complete all as specified and directed. Make: Parryware, Cat Part No T6003A1 and equivalent in Kohler, GROHE

S & F in repairs 15 mm dia wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L, Hard core of broken stone or boulders of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in foundations filling and mass concrete complete all as specified and as directed.

M&L for sand cushion 30 to 40 mm thick for laying and fixing interlocking tiles complete all as specified and as directed.

M&L for 60mm thick machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006, M-35 grade, with topping of cement mixed without pigment. Colour and shape shall be approved by Engr-in-charge/GE.

S&F Vitrified Dura stone tiles of size 300 x 300 x 10mm thick as in floors and over & including 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair and 15mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed

M & L for 100 mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in sub base of flooring all as specified and as directed.

Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge and thickness including Nainiital or similar pattern roof coveriongs complete all as specified and as directed.

S & F Pre painted galvalume alumiium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Material and labour for preparation of old plastered surfaces of walls and applying two coats of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge/GE.

Material and labour for preparation of old decorated surfaces of walls by by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge/GE.

Material and labour for preparation of old decorated wall surfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying Two coat of oil emulsion distemper white or tinted with roller application complete all as specified and as directed by Engr-in-charge/GE.

Hacking out old broken glass panes (any thickness, size quality or description) from wooden frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 4mm thick Figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F in repairs Anodised aluminium snap grid frame work of size 605 x 605mm, for false ceiling, including necessary fixing arrangement with ceiling complete all as specified and as directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F for AC desiner composite ceiling board 4 to 6m thick size 600mm x 600mm panel confirming to IS -14682 type-3 category, complete all as specified and directed by the Engr-in-Charge/GE.

M & L for smart care Damp Proof advanced compound laid in wall / Roof or in any location with and including preparation of surfaces all as per manufacturer straction all as specified and as directed .

M & L for cleaing and removing all scale and dirt etc, from tanks exceeding 500 & n.exc 1000 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

M & L for cleaing and removing all scale and dirt etc, from tanks exceeding 250 & n.exc 500 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

S&F in repairs Single Piece WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 370x695x795 mm, S trap-300mmr as approved and complete all as specified and directed by Engr-in-Charge/GE.

VISHWANATH AND SONS (BID ID -3216029)

RAMAN CONSTRUCTION CO (BID ID -3212924)

ABROL ENTERPRISES (BID ID -3217302)

ASHOK KUMAR PURI (BID ID -3217007)