PROVN OF CERTAIN MINOR AND LBW WORKS AT KAMPTEE AND NAGPUR AND REPLACEMENT OF CEILING FANS AND GEYSERS WITH CONNECTED ACCESSORIES AGAINST BER ITEMS UNDER GE KAMPTEE.

Amount

S&F electric water heater, vertical mounted storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated including temperature control knob and temperature indicator complete with all accessories such as safety valve, thermostat, NRV including PVC pipe of 600mm dia complete all as specified and directed. Make:- Havells Adonia / Jaquar Elena/ Racold Andris Uno.

S&F 15mm bore GI tubing, medium grade with all fittings to wall or laid in floors complete all as specified and directed.

S&F 80mm bore GI tubing, medium grade with all fittings to wall or laid in floors/ trenches complete all as specified and directed.

S&F 15mm bore stop valves, fancy type chromium plated, high pressure, screwed both end for iron pipe or for union and fixed complete all as specified and directed.

S&F 15mm bore, bib taps, fancy type chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 2.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade/ PVC caping casing on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 2.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one power point controlled by one switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 6 above but for one exhaust fan point controlled by one, one way switch complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F ceiling rose surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F modular switch one way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

Fixing only ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor and marking of MES no complete with fixing accessories paid seperately complete all as specified and directed. Note:- Fans will be supplied from AGE E/M store as Schedule 'B' Items.

Fixing only electric water heater, vertical mounted storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated including temperature control knob and temperature indicator digital complete with all accessories such as safety valve, thermostate, NRV, with other accessories paid seperately complete all as specified and directed. Note:- Geysers will be supplied from AGE E/M store as Schedule 'B' Items.

M&L for down rod for ceiling fan of any make land sweep made out of medium grade GI tubing 15mm dia, duly painted with two coat of enamel paint and provision of holes for electric wire at top and bottom also arrangement for fitment of ceiling fans complete all as specified and directed.

M&L for MS work such as fan hook angle / FI clamp, MS pipe nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape and size etc including two coats of synthetic enamel paint cover a coat of red oxide primer complete all as specified and directed.

S&F PVC insulated copper conductor PVC sheathed three core 1.00 sq mm flexible cable complete all as specified and as directed.

S&F PVC threaded tough rubber flexible pipe/ tubing of standard length 450mm for geysers inlet/ outlet connections complete all as specified and as directed.

Cutting existing steel tubing for alterations or additions, insertion of tee, bends etc of water pipe for geyser inlet complete all as specified and directed.

S&F exhaust fan, steel body AC single phase, 230V of size 600mm sweep, 700 RPM with blades, frame and louvers, heavy duty complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish not exc. 50m in cement mortar for fixing of Exhaust fans complete all as specified and directed.

S&F electric energy meter from existing panel, S&F microprocessor based three phase electronic tamper proof HT energy meter with optical communication port, accuracy class 0.5 rating 3 x 110V, 1/5 A conforming to IS:13779 complete with suitable size wiring complete all as specified and directed.

S&F electric energy meter from existing panel, S&F microprocessor based three phase electronic tamper proof, CT operated, energy meter for LT supply with optical communication port, accuracy class 0.5 voltage 3 x 110V, 1/5 A conforming to IS:13779 complete with suitable size wiring complete all as specified and directed.

S&F CT 240 volt, 50 Hz, 200/5 ratio epoxy moulded ISI marked complete all as specified and directed. Make:- Kappa or equivalent.

S&F CT 11000 volt, 50 Hz, 50/5/5 ratio epoxy moulded ISI marked complete all as specified and directed. Make:- Kappa or equivalent.

S&F FRP box and S&F new box made for outdoor services weatherproof, dustproof of size 650 x 350 x 250 complete with GI bracket of suitable size - 02 Nos, nuts, bolts complete all as specified and directed.

M&L for 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 6 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade in panel complete all as specified and directed.

Installation, commissioning & testing of air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, 3 star rated including making all arrangements for fixing indoor & outdoor units, making necessary hole with bracket in wall to pass the tubing and cables and grouting bolts in wall, connecting suction & discharge of copper tubing, gas charging and testing complete all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with two pin and earth plug and socket complete with one single pole MCB 25 Amp, 240V, rupturing capacity 10 KA series 'C' complete all as specified and directed.

S&F voltage stabilizer for automatic operation single phase, air cooled, indoor wall mounted type and designed for input variation between 170 volts to 250 volts output stabilize between 230 volts with accuracy of 2.5% capacity of 5 KVA complete all as specified and directed. Make:- Voltas / LG / V Guard.

M&L for sub main wiring with 1100 volt grade two single core PVC FRLSH insulated unsheathed stranded copper conductor cable and earth wire drawing in and including electrical grade non metallic rigid PVC heavy duty conduit of 20mm dia, concealed in wall, of size 2 x 6.0 sqmm with earth wire of 1 x 4.0 sqmm complete all as specified and directed. Note:- Accessories for point / sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

S&F curve MCB of single pole, 240V, 10KA, 'C' series, 25/40 amps and current carrying capacity with connection, testing and commissioning complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for laying of cable trench, pole and stay foundation and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in any type of soil complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter and 6mm thick, IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 90mm outer diameter and 78mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm, 4 core including testing after laid and jointed complete all as specified and directed. Note:- Excavation and earth work, cable protection shall be measured and paid separetely.

All as per item No 37 above but cross sectional area 70 sq mm, 3.5 core complete all as specified and directed.

Supply & installation of steel octagonal decorative poles 5 mtrs long complete with cast iron base plate, bolts, nuts and screws fixing on suitable pole foundation with street light brackets of suitable size and cable junction boxes, nut bolts, washers, terminal block and glands suitable for 16 sqmm core cable including 6 amps MCB SP complete anchor bolts and nuts as specified including plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete for stay, poles etc complete all as specified and directed. Note:- Dimensions of foundation concrete will be (LxBxD): 0.5m x 0.5m x 1.5m below ground level and 0.5m x 0.5m x 0.3m above ground level.

S&F LED street light fitting of capcity 60 watts 230V AC outdoor type with high pressure die cast aluminium housing heat resistance complete with driver, lamp bracket with impact and corrosion resistant includingthemal management in multiple optics complete with IP 65/66 protection complete with 30x5mm flat iron clamps, nuts, bolts, washers and fixing accessories including taking down old unserviceable fitting complete all as specified and directed. Make:- CG Cat No.LST-60-CDL-M / Bajaj Cat No BRLEP 60W LED V2 or equivalent in Philips.

S&F 3 core 1.5 sqmm PVC insulated, PVC sheathed, weather proof multistranded copper conductor cable, 1100 volts grade, drawn through GI conduit on pole complete all as specified and directed.

Supply and laying of 3 core 10 sqmm PVC insulated, PVC sheathed, unarmoured heavy duty stranded copper conductor cable, 1100 volts grade, for submercible pump complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth strip 30 x 6mm by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, light grade 7.5m long as applicable and as per plate No. 5 of SSR 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode. (c) PCC pit in cement concrete (1:2:4) type B-1. (d) 40mm thick Pre-cast RCC cover with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore, medium grade & copper lug etc. (f) 40mm nominal bore medium grade GI protection pipe 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion. Note:- The cost of excavation, returning filling, removing and earth work PCC pit and CI cover, funnel & watering pipe, wire mesh shall be deemed to be included in the unit rate for earthing.

M&L for trial bore of 200mm dia upto 200 mtrs depth below grounf level in any kind of soil strata including hardstone / boulder including electric logging, MS cap, MS flat iron clamps, reducing socket etc complete all as specified and directed.

M&L for reaming / widening of bore upto 525mm for 40 RM from ground level including casing pipe of size 200mm dia and thickness 8mm and pea gravel complete all as specified and directed.

M&L for reaming / widening of bore upto 525mm from depth exceeding 40 RM to 200 RM including slotted pipe of size 200mm dia and thickness 8mm and pea gravel complete all as specified and directed.

M&L for pea gravel of size 3.0mm to 6.0mm of approved quality as in packing around the linear assembly from bottom to ground level complete all as specified and directed.

M&L for lethal testing of the bore by using computerized composite lithalog machine and ascertaining the position of slotted & plain casing pipe complete all as specified and directed.

M&L for development of bore well by means of DTH machine followed by high capacity compressor to its optimum yield till clear water of potable quality free from sand/ slit is obtained including draw down performance and yield test of tube well complete all as specified and directed.

M&L for subsequent development of bore well by submercible pump set of suitable capacity till clear water of potable quality free from sand/ slit is obtained complete all as specified and directed. Note:- Pump set equipped for testing yield shall be used and submercible pump including submercible cable, column pipe and other accessories will be arranged by the contractor without any extra cost complete all as specified and directed.

M&L for carrying chemical / bacteriological analysis and potability test of water obtained from bore well from Delhi test house / MCD / approved Micro Engineering and testing lab abd submitting the report in duplicate to Engineer-in-Charge, complete all as specified and directed.

M&L for yield test of bore well by continuous pumping for 16 hours spell to determine safe pumping yield ("V" Notch method) complete all as specified and directed.

Supply, lowering and fixing into bore hole MS column pipe ERW type, 80mm nominal bore of thickness 6mm, both side flanged 10mm thick duly welded including nut, bolts & washers and rubber gasket of suitable size complete all as specified and directed.

Supply, Install, Lowering, Testing & commissioning of sbmercible pump set, multi stage with electric driven motor of minimum capacity 7.5 HP, 4 LPS discharge at 100m head, 3 phase, 415 Volts, 50 Hz, AC complete all as specified and directed.

S&F 50mm dia galvanised steel tubes, light grade for cable protection complete all as specified and directed.

S&F 200mm dia bail plug, fixed and welded complete all as specified and directed.

S&F mild steel well cap suitable for 200mm dia casing pipe with 4 Nos 18mm dia nuts, bolts and washers, 7 MS clamp, fabricated from flat iron 100 x 16mm thick duly drilled holes of suitable size including paiting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Construction of Lorry filling point of size 0.6m x 0.6m x 5m using precast cement concrete solid block masonary type C-1 (1:3:6) (using 20mm graded stone aggregate), exceeding 10cm in width and setting in cement mortar 1:4 over 150 mm thick PCC (1:3:6) (nominal mix) type C-2 (using 40mm graded crushed stone aggregate) 10mm thick rendering in cement mortar 1:4 on block work, surface finished even & smooth without using extra cement including 50mm dia GI pipe - 06 RM and 50mm dia gate valve - 01 Nos including earthwork complete all as specified and directed.

S&F gun metal globe or gate valve for 80mm dia pipe with iron wheel head, screwed both ends, ISI marked complete all as specified and directed.

S&F gun metal Non Return valve of 80mm dia, conforming to IS (ISI marked) complete all as specified and directed.

M&L for foundation including earth work, excavation, removal etc for holding of tube well of size 100cm x 100cm x 100cm at ground level with housing clamp of size 115cm x 20cm x 20cm including two coats of black bituminous paint over a coat of red oxide primer complete made of Precast cement concrete (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

S&F MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric loggin and sample strata box complete all as specified and directed.

Paragon Electrotechnics

Vaidehi E Link

Bidder Name

Paragon Electrotechnics

Vaidehi E Link

M/S. ELECTROPOWER TECHNOLOGIES